Search Results for bend strength

SILICON CARBIDE SC-221 is a beta-phase silicon carbide made from the pressureless sintering method. It possesses excellent mechanical strength at high temperature (4-point bending strength of 71ksi [490 MPa] at 1400 C [2552 F]). This datasheet provides information on physical properties, hardness, elasticity, and bend strength as well as fracture toughness. Filing Code: Cer-5. Producer or source: Kyocera America Inc..

Strenx 1100 is a structural steel that guarantees a minimum yield strength of 1100 MPa (160 ksi). Strenx 1100 provides a good combination of strength and toughness together with excellent workshop properties. Typical applications include load-bearing structures, where low weight is needed. Despite its strength, the material is easy to weld and bend. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-834. Producer or source: SSAB Swedish Steel Inc..

Strenx Section 900 is a cold-formed steel section made of hot-rolled, high-strength steel with a minimum yield strength of 900 MPa (131 ksi). Its high strength combined with naturally stiff form enables construction of stronger and lighter structures. The common shape is a U-bend channel. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-792. Producer or source: SSAB Swedish Steel Inc..

Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

Alloy KHP 151 (UNS C15100) is a high performance copper alloy with very high conductivity. Typical uses include lead frames for high-power electronic circuits, connectors, and switchblade jaws; and applications requiring high conductivity, moderate strength, good bend formability and good stress relaxation resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-863. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

RUUKKI LASER 250C is a structural steel that was developed to be easy to cut, weld, and bend. It is optimized for laser cutting in particular. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-164. Producer or source: Rautaruukki Corporation.

Dillidur 450V is a water hardened wear-resistant steel with surface hardness at room temperature of 420-480 HB. The steel is easy to weld and bend. Hot working is not recommended. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-638. Producer or source: Dillinger Hütte GTS.

ULTRONZE is a copper alloy also known as Olin Alloy 654. It bridges the gap between standard high-performance copper alloys and beryllium-copper alloys, thus enabling the design of parts with properties previously only attainable with more expensive materials. The alloy has superior stress-relaxation characteristics, good bend performance and excellent corrosion resistance. Among its typical uses are electrical connectors, fuse clips and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-417. Producer or source: Olin Brass.

STRIMEK is a Super High-Strength Low-Alloy (HSLA) steel. It is a microalloyed high-strength steel. Its unique properties are obtained in a carefully moniored process where microalloying elements are added and a special type of heat teatment is carried out. Strimek is lighter than an equivalent component of the same strength in low-carbon steel, aluminum or fibreglass-reinforced plastic. It is available in three grades, all of which have the unique combination of high strength, good formability and good weldability. Strimek is recommended where high strength at low weight is needed. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and bend strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-401. Producer or source: Uddeholm Strip Steel AB.

ISO 185/JL/275 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 275–375 MPa (40–54 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/275 contains lower carbon and silicon contents, while still maintaining good thermal conductivity and damping capacity. Owing to its higher tensile strength and hardness, it exhibits superior wear properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-79. Producer or source: International Organization for Standardization.

RMI 6Al-2Sn-4Zr-2Mo is an alpha-beta titanium alloy that provides a tensile strength of 130,000 psi in the mill-annealed condition. It is characterized by an excellent combination of tensile strength, creep strength, toughness and high-temperature stability that makes it suitable for service to 1050 F. It is recommended for use where high creep strength is required, as in components for jet engines. It has outstanding advantages for long-time use at temperature to 800 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-83. Producer or source: RMI Company.

CEN EN-GJL-200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, CEN EN-GJL-200 contains lower carbon and silicon contents and exhibits superior wear properties, while still maintaining good thermal conductivity, good damping capacity, and good machinability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on casting, heat treating, and machining. Filing Code: CI-96. Producer or source: European Committee for Standardization (CEN).

Strenx™ 1100 Plus is a high-strength, hot-rolled, quenched and tempered, structural steel with a minimum yield strength of 1100 MPa (160 ksi) and very good weld performance. The strength, elongation, and impact toughness of weldments fulfill minimum guarantees of the base metal. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-856. Producer or source: SSAB Swedish Steel, Inc..

ISO 185/JL/200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, 185/JL/200 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-70. Producer or source: International Organization for Standardization.

Ispat Inland MartINsite is a low-carbon cold-rolled ultrahigh-strength steel available in four grades with minimum tensile strengths of 900 MPa (130 ksi) (M-130), 1100 MPa (160 ksi) (M-160), 1310 MPa (190 ksi) (M-190), and 1520 MPa (220 psi) (M-220). This steel can be used where high strength and/or lightweight are required and can substitute for high-carbon alloy steels, spring steels, and some nonferrous alloys at significant savings in cost. Electrosite is an electrogalvanized form of M-190. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on wear resistance as well as heat treating and surface treatment. Filing Code: CS-62. Producer or source: Ispat Inland Inc. Originally published as Inland MartINsite, October 1976, revised February 2003.

UNS No. R54620 is an alpha-beta titanium alloy. It has an excellent combination of tensile strength, creep strength, toughness and high-temperature stability that makes it suitable for service to 1050 F. It is recommended for use where high strength is required. It has outstanding advantages for long-time use at temperatures to 800 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-86. Producer or source: Titanium alloy mills.

BETHLEHEM HOT-ROLLED SHEET XF SERIES alloys B50XF, B60XF, B70XF and B80XF are high strength low alloy steels. The numbers in the alloy designations refer to minimum yield strengths. The steels are made using ladle desulfurization which virtually eliminates harmful stringer type inclusions. The steels were developed for parts that are difficult to form using conventional high strength low alloy steels. This datasheet provides information on composition, microstructure, hardness, tensile properties, and bend strength as well as deformation, and fatigue. It also includes information on forming and machining. Filing Code: SA-383. Producer or source: Bethlehem Steel Corporation. Originally published August 1981, Bethlehem B50XF thru B80XF.

MITTAL DI-FORM T590 and T600 are low-carbon dual-phase steels containing manganese and silicon. Dual-phase (DP) steels are important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strength ratios. The numeric designation in the grade name corresponds to the tensile strength in MPa. This datasheet provides information on microstructure, tensile properties, and bend strength as well as fatigue. It also includes information on forming. Filing Code: SA-558. Producer or source: Mittal Steel USA Flat Products.

The high strength of Tenform XF450, a hot-rolled high-strength low-alloy steel, allows the user to increase the strength of a finished component or to reduce the thickness. The steel is used in the construction and the automotive industries. This datasheet provides information on composition, physical properties, tensile properties. and bend strength. It also includes information on forming. Filing Code: CS-148. Producer or source: Hille & Mueller, USA Inc. See also Alloy Digest CS-173, November 2012.