TRIBALOY 400 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder/Metallurgy) processing. Uses include anti-wear surfaces and bearings or seals operating in corrosive media. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-72. Producer or source: Tribaloy Products.

MUELLER Alloy 6733 is a low-leaded bearing alloy designed for use where ductility and cold working are necessary for such operations as spinning or forming. It can be used with hard or soft mating members. This alloy can be joined by soft or silver soldering. Among the many applications for Mueller Alloy 6733 are clutch bearings, cams, pump gears and seal rings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-484. Producer or source: Mueller Brass Company.

Copper Alloy No. C67300 is a copper-manganese-silicon-lead alloy with good machinability. It is used against hard or soft mating surfaces. It can be joined readily by soft soldering or silver soldering. It has excellent mechanical and wear properties and good resistance to corrosion. Among its many applications are bearings, bushings, connecting rods, pump parts, gears, cams and seal rings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-514. Producer or source: Copper and copper alloy mills.

Bearium B-4, B-8, B-10, and B-11 are copper-base, high-lead bearing bronzes with superior resistance to scoring and seizure beyond the endurance and danger limits of ordinary bearing bronzes. It is used in applications involving high speeds, poor lubrications, heat-generating loads, elevated temperatures, dusty and gritty surroundings, or when a liquid other than oil is used as the lubricant. It is produced in four grades: B-4, B-8, B-10, and B-11. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: Cu-860. Producer or source: MetalTek International. Originally published as Bearium Metal, Alloy Digest Cu-258, September 1972, revised April 2017.

MUELLER 600 BEARING BRONZE is a copper-base beating alloy possessing excellent hot working qualities, high mechanical properties and good resistance to wear. It is also corrosion resistant. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-17. Producer or source: Mueller Brass Company. Originally published June 1954, revised April 1965.

Bohnolloy R-57 is a very strong manganese bronze recommended for parts which are subjected to heavy loads. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-148. Producer or source: Bohn Aluminum & Brass Corporation.

CERAMVAR is an iron, nickel, cobalt alloy specially designed and suited for ceramic-to-metal sealing. It has expansion characteristics closely matching those of high temperature alumina ceramics. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, machining, joining, and surface treatment. Filing Code: Fe-21. Producer or source: Wilbur B. Driver Company.

The 42 Nickel-Iron alloy has the lowest expansivity of the Iron-Nickel alloys that are commonly used for glass-sealing applications. Its thermal expansion closely matches the 1075 glass and it is sometimes used for sealing action with the 0120 and 0010 glasses. It is made close metallurgical control to provide uniformity of performance. Its many uses include industrial lamps, ceramic-to-glass seals, and sealed-beam automobile headlamps. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-66. Producer or source: Iron-nickel alloy mills.

TECHALLOY GLASSEAL 42 is an iron-nickel alloy with thermal expansion that closely matches the 1075 glass. Also, it is sometimes used for sealing action for the 0120 and 0010 glasses. It has the lowest expansivity of the iron-nickel alloys that are commonly used for glass-sealing applications. It is made under strict metallurgical control to provide uniformity of performance. Among its uses are sealed-beam automobile headlamps, ceramic-to-glass seals and industrial lamps. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-59. Producer or source: Techalloy Company Inc..

A-L 42 is intended as a controlled-expansion alloy for applications in the electronics and electrical industries. It is used in conjunction with certain glass (0120, 0010, 1075, etc.) and other nonmetallic materials in sealing applications. A-L 42 is AOD (Argon Oxygen Decarburization) refined in 100-ton heats to insure high quality and uniformity. Its applications include semi-conductor lead frames, sealed-beam automobile headlamps and industrial lamps. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-62. Producer or source: Allegheny Ludlum Corporation.

AMS 4880-C95510 is a nickel-aluminum bronze casting useful for bushings and bearings. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining. Filing Code: Cu-895. Producer or source: Concast Metal Products Company.

Mueller 602 is a bearing alloy possessing good machinability for use with hard or soft mating members where moderate strength will suffice. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-106. Producer or source: Mueller Brass Company.

Mueller 6730 is a forgeable (leaded) bronze bearing alloy possesing good machinability for use with hard or soft mating members where moderate strength will suffice. It is recommended for gears, pump parts, thrust bearings, valve seats, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-195. Producer or source: Mueller Brass Company.

MUELLER 604 is a high leaded copper alloy that is especially suited for screw machine work. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-108. Producer or source: Mueller Brass Company.

MAGNESIUM AZ61A is a magnesium extrusion alloy having a strength level between that of AZ31B and ZK60A. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-43. Producer or source: The Dow Chemical Company.

METCO 505 is a high-molybdenum powder designed to produce plasma flame spray coatings for use as hard bearing surfaces with low coefficient of friction and for resisting wear by abrasive grains or hard surfaces. Its coatings have excellent non-scuffing properties and are compatible with many mating materials, particularly cast iron and iron-base alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as surface treatment. Filing Code: Mo-12. Producer or source: Metco Inc..

FERRO-TIC DN-1 is comprised of a dispersion of extremely hard, inert titanium carbide grains in a special age-hardenable nickel-aluminum alloy matrix. It is characterized by excellent resistance to corrosion by strong chlorides. Its maximum operating temperature is 900 F. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as heat treating, machining, surface treatment, and powder metal forms. Filing Code: Ni-241. Producer or source: Chromalloy Metal Tectonics Company.

MUELLER Alloy 6732 is a free-machining high-leaded copper-base alloy that is especially well suited for screw machine work. It can be used with hard or soft mating members. It can be joined readily by soft or silver soldering. It possesses excellent bearing properties, high mechanical properties and good resistance to corrosion. Its uses include bushings gears, bearings and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-481. Producer or source: Mueller Brass Company.

Ultibron CNS is a high-performance silicon bronze alloy with excellent corrosion resistance. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: CU-769. Producer or source: Advanced Metals International.

MUFLLER Alloy 6730 is a medium-leaded copper-base alloy with good machinability. It can be used with hard or soft mating members where moderate strength is sufficient. It can be joined successfully by soft soldering or silver soldering. Among its many uses are bearings, bushings, connecting rods and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-486. Producer or source: Mueller Brass Company.