1-20 of 684 Search Results for

bar stock

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1970) 19 (3): CS-33.
Published: 01 March 1970
... AISI C1010 is a low carbon steel having good formability and weldability. It is recommended in sheet stock for deep drawing operations and in sheet and bar stock for structural shapes and case hardened parts. This datasheet provides information on composition, physical properties, hardness...
Journal Articles
Alloy Digest (1963) 12 (4): Ti-34.
Published: 01 April 1963
... HYLITE 40 is a titanium-aluminum-manganese alloy of high strength with excellent properties as forgings and bar stock. It is recommended for compressor dises and blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well...
Journal Articles
Alloy Digest (2019) 68 (1): Al-457.
Published: 01 January 2019
... Kaiser Alloy 7075 in pipe and tube is used in hydraulic lines. This alloy is covered in Alloy Digest Al-368, March 2000, but that datasheet is for screw machining bar stock whereas this one includes tube and pipe data. This datasheet provides information on composition, physical properties...
Journal Articles
Alloy Digest (1999) 48 (11): SS-769.
Published: 01 November 1999
... Project 7000 Stainless Type 416 is a version of Carpenter Stainless Type 416 and is an improved-machining version of Project 70 Stainless Type 416 (see Alloy Digest SS-459, March 1985). Project 7000 Stainless Type 416 offers benefits in long production runs and is available as bar stock...
Journal Articles
Alloy Digest (2020) 69 (4): CI-68.
Published: 01 April 2020
... Dura-Bar G2P is a pearlitic gray cast iron that is used for continuous cast products. It was developed to best suit flame and induction hardening. G2P is made with a substantial amount of pearlite in the rim. This requires the least amount of stock removal for achieving a heat-treatable surface...
Journal Articles
Alloy Digest (1959) 8 (2): SS-84.
Published: 01 February 1959
... without di& culy on bar stock supplied in this condition. Alternatively, on special request, bar stock is supplied solution annealed and air cooled from 1380°F. only. giving a Brinell hardness of 280. This is the best condition for diflicult machining opera- tions. Components produced from bar stock air...
Journal Articles
Alloy Digest (1961) 10 (12): SS-28.
Published: 01 December 1961
...: o:ooooo99 101 110 139 ;2 31Iooo*ooo Non-magnetic Modulus of Elnsticity, psi 30.8 I 106 (b) J3ar stock, l-m. drpmmr as-tor (c) Bar stock, l-in. diamenz luster 1 hour at 2320 deg. F.; warcrquenched; heated 24 hours at 1500 deg. F.; air-cooled. (d) Bar stock, l-in. diameter. heated 45 minum at 2300 deg. F...
Journal Articles
Alloy Digest (1959) 8 (5): Ti-19.
Published: 01 May 1959
... (Titanium-Base Alloy) Ti-155A is a titanium alloy having guaranteed heat treat capability up to 175,000 psi tensile strength for bar stock and 180,000 psi for forging stock. Composition: Iron chromium Molybdenum AhmiMm Nitrogen carbon Hydrogen Titanium 1.1 - 1.7 1.1 - 1.7 0.9 - 1.5 5.0 - 6.0 0.05 max. 0.08...
Journal Articles
Alloy Digest (1993) 42 (4): Ni-426.
Published: 01 April 1993
... be used at tempeawures up to 16OOOF. The alloy s excel- lent self-lubrication qualit& due to inclusion of silver, makeitidealfarvalveguidesinaircmftenginesthat operate in extreme cold. Alloy 54C affords exceptional wearreziimmce. Forms Available: Castings and bar stock. Rough machined bar stock, both...
Journal Articles
Alloy Digest (1955) 4 (6): TS-34.
Published: 01 June 1955
... Hardness ROCkWdlC 65.5 64.5 64.0 63.0 62.0 61.5 60.5 59.5 57.5 57.0 DOI: 10.31399/asm.ad.ts0034 Copyright © ASM International® 1996 Samples were cut 2 inches long from 1 inch round annealed bar stock They were preheated at 1200 F., transferred to an dectric furnace with atmosphere of about 10% CO, held...
Journal Articles
Alloy Digest (1966) 15 (11): SA-204.
Published: 01 November 1966
... 1500 (d) 49,400 29,000 34.0 35.0 (a) Heavy forging, 21-in. diameter by 3% in. thick; forged; stress-relieved 2 hours at 1200 deg. F., air-cooled. (b) Bzr stock, l-in. diameter; as-forged. (cj Bar stock, l-in. diameter; heated 1 hour at -J- 0 deg. F.; water-quenched; heated 24 hours at 1500 deg. F...
Journal Articles
Alloy Digest (1956) 5 (3): SS-41.
Published: 01 March 1956
... B92 G29 c25.5 T=yF-= :! 700 1E 1200 1400 1500 Table 2 - SHORT TIME TENSILE PROPERTIES - ELEVATED -TURE (Typical of hoc rolled % saess relieved bar stock) Tensile Saeogtb Yield Strength psi psi (01%) Propmio~ Limit pu ye 0 -&Of Arc3 ;g:;x 69000 44000 55.5 99ho Es Zi:: ;t: 3750 30000 52$ 91750 87Ei EEi...
Journal Articles
Alloy Digest (2019) 68 (9): Cu-895.
Published: 01 September 2019
... Forms Available Solids 12.7 229 mm (0.5 9 in.) O.D. Tubes 28.6 330 mm (1.125 13 in.) O.D. Rectangles Up to 381 mm (15 in.) Standard lengths 610 mm (24 in.) Shape/form Semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape...
Journal Articles
Alloy Digest (2019) 68 (12): Cu-902.
Published: 01 December 2019
... Rectangles Up to 178 mm (7 in.) Standard lengths 3658 mm (144 in.) Shape/form semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar C95500 is compliant with key legislation, including: Federal Safe Drinking...
Journal Articles
Alloy Digest (1993) 42 (2): Ni-84.
Published: 01 February 1993
..., and as tough. In applications requiring high resistance to gall- ing, it is very useful. r ASTM D 3702 Modified Wear Rate Test for self-lubricating materials. Tests performed in water at ambient temperature at Falex Corporation l.ooO PV Forms Available: Castings and bar stock. Rough machined bar stock, both...
Journal Articles
Alloy Digest (1993) 42 (3): Ni-49.
Published: 01 March 1993
... in dairy equipment and other food processing machinery where sanitation is essential Forms Available: Castings and bar stock. Rough machined bar stock, both solid and cored, is available in a wide range of sizes starting at 314 diameter x 6 long. Finished sizes include: 3/4 and 1 dia. x 6; l-1/4, l-3...
Journal Articles
Alloy Digest (2017) 66 (7): Ni-731.
Published: 01 July 2017
.... Mechanical Properties: Table 1 contains tensile properties, Table 2 contains average stress-rupture data for bar stock, and Table 3 contains average stress-rupture data for bar. Weldability: Due to its good weldability, general welding, such as metal arc, inert gas coating arc (TIG and MIG) etc. is possible...
Journal Articles
Alloy Digest (1966) 15 (9): Ni-117.
Published: 01 September 1966
... 138000 126000 20 27 1400 13 1000 122000 20 24 1500 106000 103000 16 23 Table 3 - STRESS RUPTURE PROPERTIES - Bar Stock (Fullv heat treated) 8.23 0.297 7.80 8.56 9.32 29 Test Temperature Stress psi to Cause Rupture in OF 100 hours 1000 hours 1200 95000 81000 1300 71000 6 1000 1400 49000 38000 1500 33000...
Journal Articles
Alloy Digest (2014) 63 (2): Ti-151.
Published: 01 February 2014
... with excellent creep resistance and higher strength than Ti-6Al-4V. Timetal 7-4 can offer very good high temperature resistance up to 482 °C (900 °F). Products Available: The producer supplies the material in plate form although bar, forgings, and forging stock are also possible. Applications: This alloy...
Journal Articles
Alloy Digest (1970) 19 (10): SS-49.
Published: 01 October 1970
... 50 70 Reduction of Area % 9 21 f : : 9 13 :58 63 84 Table 2 - TYPICAL IMPACT STRENGTH OF BAR STOCK BrineII Hardness 344 242 220 208 190 177 321 230 193 163 Charpy V-notch Impact Strength ft-lb Heat Treatment Room Temperature 16000F 2150°F, 1 hr. w.q.; 1400oF, 14 hr, LC. 11 42 2150oF, 1 hr. w.q...