Search Results for ball bearings

STROLOY 503-A is a hypereutectoid steel of bearing quality. It has through-hardening characteristics similar to those of AISI 52100 steel. Stroloy 503-A is made in accordance with ASTM A 295-84. It is used principally in ball bearing applications. This datasheet provides information on composition and hardness. It also includes information on forming, heat treating, and machining. Filing Code: SA-406. Producer or source: Babcock & Wilcox Company. See also Alloy Digest SA-281, October 1972.

AISI Type 440B is a hardenable high-carbon high-chromium steel recommended stainless for cutlery, valve parts, ball bearings, pivot pins, etc. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-223. Producer or source: Stainless steel mills.

AISI 1095 is a high-carbon, water-hardening tool and spring steel of low hardenability. Depending on the properties required, it may be used in the astrolled, annealed, normalized or liquid-quenched-and-tempered condition. It is hardened by austenitizing and quenching in water (preferably) but it may be quenched in oil if a less drastic quench meets requirements. Its many uses include springs, bushings, drills, hay-rake teeth, pins and ball bearings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-99. Producer or source: Carbon steel mills.

TIMKEN TBS-9 is a high-carbon, chromium-molybdenum ball-bearing steel that combines high hardenability and low cost. It was designed with metallurgical properties virtually equivalent to those of AISI 52100. TBS-9 is less expensive than the 52100 grade because annealing is simplified. It is produced to the same quality requirements as the 52100 steel. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: SA-363. Producer or source: Timken Company Steel Divison.

Carpenter CTS BD1 alloy is a high-carbon chromium steel that provides stainless properties with high hardness and excellent wear resistance. In terms of hardness and wear resistance, this alloy behaves very similarly to tool steels. This alloy attains a hardness of 58–60 HRC when heat treated and has been used for cutlery, ball bearings, and small machinery parts subjected to high wear conditions. This datasheet provides information on composition and physical properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1160. Producer or source: Carpenter Specialty Alloys.

VASCO VANADIUM TYPE BB is a high carbon, chromium-vanadium alloy steel of the water-hardening or oil-hardening type having high wear resistance combined with toughness. It has good depth hardenability for a water-hardening steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-128. Producer or source: Vanadium Alloys Steel Corporation.

LESCALLOY BG42 VIM-VAR combines the tempering, hardness and hardness-retention characteristics of AISI M50 high-speed steel with the corrosion and oxidation resistance of AISI Type 440C stainless steel. LESCALLOY BG42 VIM-VAR is double vacuum melted (VIM, Vacuum Induction Melted; VAR, Vacuum Arc Remelted) to consistently assure good cleanliness and superior properties. It is used for bearings, gears, ball screws and other aerospace applications. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-356. Producer or source: Latrobe Steel Company. See also Alloy Digest SS-179, revised February 1992.

HOWMET No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. It is recommended for bushings, scrapers, valve parts, and other machinery components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-56. Producer or source: Howmet Corporation Metal Products Division.

LESCALLOY BG42 VIM-VAR is a martensitic stainless high-speed steel that combines the temper resistance and hot hardness characteristics of M-50 high-speed steel with the corrosion resistance of AISI Type 440C stainless steel. (See also LESCALLOY BG42, Alloy Digest SS-280, October 1972.) This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-179. Producer or source: Latrobe Steel Company. Originally published as Lesco BG42, March 1966, revised February 1992. See also Alloy Digest SS-356, October 1978.

Vasco Momarc CVM is a modification of AISI 52100 steel where the manganese has been replaced by molybdenum to provide the desirable hardenability. It is more resistant to tempering than 52100 which makes it ideal for bearing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-192. Producer or source: Vanadium Alloys Steel Company.

Crucible 154 CM is a hardenable chromium stainless steel with molybdenum to improve hot hardness and corrosion resistance. Typical applications include bushings and bearings where high hardness is needed. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-737. Producer or source: Crucible Service Centers.

Durimphy is a maraging steel with 1724 MPa (250 ksi) tensile strength and a very high yield strength due to precipitation hardening. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-140. Producer or source: Metalimphy Precision Alloys.

Phytime is a maraging steel with a 2068 MPa (300 ksi) strength and a very high yield strength due to precipitation hardening. The major improvement over Durimphy (see Alloy Digest Fe-140, February 2007) is cleanliness and improved fatigue performance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-141. Producer or source: Metalimphy Precision Alloys.

AMPCOLOY 45 is a high strength, extra tough bronze for machine tool parts, gears, shafts, etc. It is heat treatable and has excellent to corrosion, wear and abrasion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-128. Producer or source: Ampco Metal Inc..

HAYNES STELLITE alloy No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-29. Producer or source: Haynes Stellite Company.

CarTech 420 is a hardenable, 13% chromium, martensitic stainless steel with higher strength and hardness, and better wear resistance than Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1321. Producer or source: Carpenter Technology Corporation.

DYNAVAR is a corrosion resistant, non-magnetic, age-hardening type cobalt-base alloy with good hot and cold working properties. It is characterized principally by its high fatigue resistance, tensile strength, torque values and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Co-16. Producer or source: Precision Metals Division, Hamilton Watch Company. Originally published March 1959, revised June 1963.

Crucible 440C is a hardenable chromium steel. It has one of the highest attainable hardnesses of the corrosion and heat resisting grades. This grade is magnetic at all times. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-700. Producer or source: Crucible Specialty Metals Division, Colt Industries.

AISI TYPE 440C is a hardenable high-carbon chromium steel designed to provide stainless properties with maximum hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-101. Producer or source: Stainless steel mills. Originally published March 1960, revised June 1988.

TLS 420 MQ os a mold-quality stainless steel that meets requirements in polishability, corrosion resistance, and wear resistance by special melting and forging practices. Is is used in plastic mold cavities and surgical instruments. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: SS-826. Producer or source: Timken Latrobe Steel.