Search Results for axles

FOX 130 is an oil hardening manganese-molybdenum alloy steel recommended for automobile and general engineering machinery parts such as crankshafts, axles, connecting rods, gears, fasteners and other high tensile and shock resisting component parts. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-237. Producer or source: Samuel Fox & Company Ltd, Stocksbridge Works.

AISI 1340 is a carbon-manganese oil hardening steel with greater hardenability than the 1000 and 1100 steels of comparable carbon content, and with poorer machinability than the sulfurized 1100 steels. It is recommended for general engineering and machinery parts such as shafts, gears, axles, fasteners, rollers, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-30. Producer or source: Carbon and alloy steel mills.

Tormanc Major is an oil-hardening manganese-molybdenum alloy steel recommended for automobile and general engineering machinery parts such as crankshafts, axles, connecting rods, gears, bolts, and other high tensile component parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-151. Producer or source: Samuel Fox & Company Ltd, Stocksbridge Works.

AISI 8660 is a high carbon, chromium-nickel-molybdenum alloy steel having high hardness and strength, suitable for springs and axle shafts. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-178. Producer or source: Alloy steel mills and foundries.

AISI 8645 is a triple-alloy steel of the oil-hardening type. Its good hardenability and strength make it suitable for axles, shafts and a wide variety of other engineering uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-279. Producer or source: Alloy steel mills and foundries.

AISI 50B60 is a low-chromium alloy steel with boron added to increase its hardenability. It develops high hardness and strength and is suitable for springs and axle shafts. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-320. Producer or source: Alloy steel mills and foundries.

AISI 1030 is a plain carbon steel containing nominally 0.30% carbon. It is used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered conditions for general-purpose engineering and construction. It provides medium strength and toughness at low cost. Among its many uses are axles, bolts, gears and building sections. All data are on a single heat of fine-grain steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-94. Producer or source: Carbon and alloy steel mills.

AISI 1137 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to provide free-machining characteristics. It is recommended especially for high-production automatic machine products. AISI 1137 has relatively low hardenability. In the longitudinal direction its ductility and toughness are fairly good but in the transverse direction they tend to be low. Its many uses include spline shafts, mine-car axles and shafts, gears, bolts, tool holders and tie-rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-97. Producer or source: Carbon steel mills.

AISI 1144 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.24-0.33% sulfur to provide a free-machining steel. It is recommended especially for high-production automatic machine products. It has relatively low hardenability. Its ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses of AISI 1144 include mine-car axles and shafts, screws, propeller shafts, ball joints, bushings, bolts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-98. Producer or source: Carbon steel mills.

Alloy Steel 3.5 Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite of ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-400. Producer or source: Alloy steel mills and foundries.

AISI 1146 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Among its many uses are axles and shafts, screws, spindles, ball joints, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-102. Producer or source: Carbon steel mills.

Alloy Steel 5Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite or ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears, ship forgings, and many other thick-section components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-403. Producer or source: Alloy steel mills and foundries.

Alloy Steel 3.5Ni-1.8Cr-0.4Mo-0.1V is highly suitable for massive components, usually more than four inches thick. It has high hardenability which in a water-spray or water-immersion quench contributes to the formation of sizeable amounts of martensite along with some bainite, and possibly a little ferrite. On tempering, the martensite adds to toughness and lowers the temperature of transition from tough to brittle failure. This steel is suitable for intermediate-duty and heavy-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-404. Producer or source: Alloy steel mills and foundries.

AISI 1151 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. Its ductility and toughness are reasonably good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Its uses include axles and shafts, spindles, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-103. Producer or source: Carbon steel mills.

UNS No. G10460 is a general-purpose construction and machinery steel. It can be used in a variety of conditions: hot rolled, annealed, normalized, oil quenched and tempered, water quenched and tempered or austempered. It furnishes medium strength and toughness at a low cost. It is frequently used for flame or induction-hardened parts. Its many uses include axles, bolts, pins, shafts and forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-104. Producer or source: Carbon steel mills.

ALUMINUM 319.0 is a general-purpose foundry alloy that is moderately responsive to heat treatment. It has excellent casting characteristics and good mechanical properties. Among its many uses are crankcases, housings, engine parts, typewriter frames and rear-axle housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on low and high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-256. Producer or source: Various aluminum companies.

SAE 4145 is a through-hardening, medium-carbon chromium-molybdenum alloy steel of high hardenability. It is recommended for heavy-duty service and is suitable for a wide variety of engineering uses. Its many applications include gears, axles, flanges, machine tool parts, nitrided parts, bolts, connecting rods, sprockets and valve seats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-420. Producer or source: Alloy steel mills and foundries.

AISI 81B45 is a nickel-chromium-molybdenum alloy steel to which boron has been added to increase its hardenability. It has intermediate hardenability for medium-duty applications. Its many uses include axles, gears and machinery components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-337. Producer or source: Alloy steel mills and foundries.

DYNA-LOY HS-32 is a cold-drawn high-strength alloy steel developed for those applications that require a minimum hardness of Rockwell C 32. Its chemical composition permits maximum machinability and improved surface finish at a guaranteed minimum tensile strength of 150,000 psi as supplied. Thus it needs no heat treatment and is suitable for a wide variety of engineering uses such as shafts, axles and machine-tool parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, joining, and surface treatment. Filing Code: SA-338. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

AISI 4137 is a medium-carbon low-alloy steel suitable for heavy-duty service. It is nominally an oil-hardening steel; however, it may be water hardened if suitable precautions are taken to avoid cracking. Its many uses include axles, fittings, gears, crankshafts and nitrided parts. It has a low tendency to develop temper embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-366. Producer or source: Alloy steel mills and foundries.