COMPO H is an oil-impregnated sintered bronze, produced by powder metallurgy techniques, which is widely used in automotive, applicance, farm equipment, and aircraft industry applications. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength. and bearing strength It also includes information on corrosion resistance Filing Code: Cu-246. Producer or source: Bound Brook Bearing Corporation of America.

Wieland B31 (CuSn2Fe0.1P) is a copper-tin-iron-phosphorus alloy (tin bronze) with coherent precipitates. The lower tin content with small amounts of iron and phosphorus results in an electrical conductivity of at least 30% IACS. Precipitates of iron and phosphorus stabilize the structure, increase the strength, and improve the softening characteristics. Wieland B31 possesses the right combination of formability, conductivity, strength, and stress relaxation resistance to be used for automotive applications at relatively high ambient temperatures. In addition, its strength is similar to that of a 4% tin bronze. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Cu-926. Producer or source: Wieland-Werke AG.

KANTHAL 70 alloy was designed to provide a high positive temperature coefficient to electrical resistance comparable with that of pure nickel; however, it has much higher electrical resistivity than pure nickel. This makes it useful as a voltage regulator when placed in series with another electrical device across a fluctuating voltage source. Kanthal 70 has a maximum recommended operating temperature of 600 C and is used widely in resistance thermometers and in various appliance and automotive applications. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-270. Producer or source: The Kanthal Corporation.

ALUMINUM A206.0 is a high-strength aluminum casting alloy. It provides an optimum combination of strength, light weight and economy. Its performance approaches that of forged steel, yet it may be less expensive to use because its lower tooling costs often offset the price difference. In automotive applications, the lighter weight of A206.0 can save fuel and increase range. See also Aluminum A201, Alloy Digest Al-234, April 1979. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-244. Producer or source: Various aluminum companies.

ALUMINUM 295.0 is an aluminum sand casting alloy suitable for uses requiring high strength with ductility and toughness. It has fair castability, good machinability, and is used for a number of aerospace and automotive applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-222. Producer or source: Various aluminum companies.

UNS A02950 is an aluminum casting alloy suitable where high strength with ductility and toughness is required. It has fair castablility and good machinability. It is used for aerospace and automotive applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-297. Producer or source: Various aluminum companies.

ZYMAXX provides outstanding compressive creep resistance, toughness and chemical inertness at high temperatures and pressures and under adverse conditions. They have a wide range of uses beyond chemical processing, including aerospace and automotive applications, general industrial equipment, home appliances, farm and construction equipment. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on corrosion resistance. Filing Code: Cp-18. Producer or source: E. I. Dupont de Nemours & Company Inc..

Rio Tinto Alloys 206.2, A206.2, and B206.2 are heat-treatable, aluminum-copper-magnesium casting alloys in ingot form for remelting. These alloys are primarily intended for producing sand and permanent mold castings for aerospace and automotive applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Al-460. Producer or source: Rio Tinto Limited.

Alcoa EZCast 370 is a heat-treatable, aluminum-silicon-magnesium-manganese high-pressure die casting (HPDC) alloy which is widely used for thin-walled, crash-resistant, structural components for automotive applications. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on joining. Filing Code: Al-461. Producer or source: Alcoa Corporation.

DUAL-TEN 590 (UTS 590 MPa, or 86 ksi) is a dual-phase steel for the automotive industry. Dual-phase steels are most commonly used in structural applications where they have replaced more conventional HSLA steels. They offer a great opportunity for part weight reduction. The improved formability, capacity to absorb crash energy, and ability to resist fatigue has driven this substitution. Applications include front and rear rails, crush cans, rocker reinforcements, pillar reinforcements, cowl inner/outer, back panels, cross members, bumpers, and door intrusion beams. This datasheet provides information on composition, physical properties, microstructure, and tensile properties as well as fatigue. It also includes information on forming and joining. Filing Code: SA-532. Producer or source: United States Steel.

DUAL-TEN 500 (UTS 500 MPa, or 73 ksi) is a dual-phase steel for the automotive industry. Dual-phase steels are most commonly used in structural applications where they have replaced more conventional HSLA steels. They offer a great opportunity for part weight reduction. The improved formability, capacity to absorb crash energy, and ability to resist fatigue have driven this substitution. Applications include front and rear rails, crush cans, rocker reinforcements, pillar reinforcements, inner and outer cowl, back panels, cross members, bumpers, and door intrusion beams. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as deformation. It also includes information on forming and joining. Filing Code: SA-530. Producer or source: United States Steel.

DUAL-TEN 600 is a dual-phase steel for the automotive industry. Dual-phase steels are most commonly used in structural applications where they have replaced more conventional high-strength low-alloy (HSLA) steels. Applications include front and rear rails, crush cans, rocker reinforcements, pillar reinforcements, inner and outer cowl, back panels, cross members, bumpers, and door intrusion beams. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as deformation. It also includes information on forming and joining. Filing Code: SA-533. Producer or source: United States Steel.

DUAL-TEN 780 (UTS 780 MPa, or 113 ksi) is a dual-phase steel for the automotive industry. Dual-phase steels are most commonly used in structural applications where they have replaced more conventional high-strength low-alloy (HSLA) steels. Applications include front and rear rails, crush cans, rocker reinforcements, pillar reinforcements, inner and outer cowl, back panels, cross members, bumpers, and door intrusion beams. This datasheet provides information on physical properties, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: SA-535. Producer or source: United States Steel.

PMX alloy C15100 is a high performance alloy with improved stress relaxation so it can be used reliably at 65 deg C (150 deg F) for automotive and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. Filing Code: CU-786. Producer or source: PMX Industries Inc.

REPUBLIC X-80-W is a high-strength, low-alloy steel developed to achieve a minimum yield strength of 80,000 psi in the as-hot-rolled condition. It also exhibits good fatigue performance, good bendability, and good weldability. It is available as bars and can be used in various automotive and machinery applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-372. Producer or source: Republic Steel Corporation.

ELEKTRON AZ31B is a wrought magnesium alloy developed to offer good properties maintaining corrosion resistance and weldability. The alloy is used in aerospace, automotive, and military applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance and surface qualities as well as forming, heat treating, machining, and joining. Filing Code: Mg-78. Producer or source: Magnesium Elektron Wrought Products, North America.

FEDERATED F410 is a heat-treatable aluminum sand casting alloy recommended for uses requiring high strength along with toughness and ductility. It has good machinability, fair castability, and is suitable for a number of automotive and aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-210. Producer or source: Federated Metals Corporation, ASARCO Inc..

Carpenter AerMet 340 Alloy possesses high hardness and strength while exhibiting exceptional toughness and ductility, and can be considered for a variety of automotive, racing, aerospace, and defense applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and machining. Filing Code: FE-148. Producer or source: Carpenter Specialty Alloys.

ANACONDA Alloy 260 nominally contains 70% copper and 30% zinc. This alloy is the most ductile of the brasses and also has fairly high strength; it is used in greater quantity than any other copper-zinc alloy. It takes its tradename (Cartridge Brass) from its use as the standard material for artillery and small-arms cartridge cases. It offers excellent-to-good resistance to corrosion in most environments. Its many uses include architectural, automotive, electrical, hardware, industrial, munitions, plumbing and wire applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-395. Producer or source: Anaconda American Brass Company.

Alcoa Aluminum Alloy 6013 is a high-strength Al-Mg-Si-Cu alloy. It is available in five tempers. It is crossing many market areas of applications in aerospace, defense, automotive and general structural use. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-282. Producer or source: Aluminum Company of America. Originally published September 1987, revised July 1988.