Search Results for amorphous

METGLAS Alloy 2605SC is an amorphous iron-base, general-purpose, soft magnetic alloy with properties superior to conventional crystalline electrical steels. It offers a unique combination of high resistivity, high saturation induction and extremely low core loss; these characteristics make it suitable for use from low frequencies to very high frequencies. Its applications include transformers and other devices requiring a square-loop high-saturation material. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-64. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605S-2 is an amorphous iron-base soft magnetic alloy designed for extremely low core loss at distribution and power transformer frequencies and inductions. It offers improved performance over METGLAS Alloy 2605SC (Alloy Digest Fe-64, February 1982) at the higher operating temperatures (100 C) of these devices. Alloy 2605S-2 has a lower temperature coefficient of saturation than Alloy 2605SC. Applications include power transformers and other devices operating at low frequencies. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-65. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605S-3 is an amorphous iron-base soft magnetic alloy that can be annealed to obtain a round B-H loop which results in very low core loss at high frequencies (>1kHz). Because of its high saturation induction relative to ferrites or permalloys, significant size reductions are possible in high-frequency devices by utilizing this alloy. Unlike ferrites, it is suitable for use over a wide operating temperature range without cracking or showing large drops in usable flux density. Its uses include numerous high-frequency devices. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-68. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605CO is an amorphous iron-base soft magnetic alloy. It has the highest saturation induction of any amorphous alloy commercially available, combined with very low core loss. It is the alloy of choice when low weight is as important as efficiency. It is particularly suited to 400 Hz aerospace applications where small core size is a requirement, and to pulse applications where maximum flux swing is desired. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-69. Producer or source: Allied Corporation, Metglass Products Department.

ULTEM 1000 and 1010 are unreinforced grades of polytherimides which combine superior properties and processability. They possess good heat deflection characteristics and excellent flame resistance. They are available in natural transparent amber as well as opaque colors. This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on wear resistance. Filing Code: P-9. Producer or source: G. E. Plastics.

ULTEM 2100, 2200, 2300 and 2400 resins have high heat resistance, inherent flame resistance with low smoke evolution, broad chemical resistance and outstanding processability. Glass reinforcment provides increased rigidity and dimensional stability while maintaining good processing features. The ULTEM 2000 series is available in both low viscosity and mold release grades in addition to the standard grades. This datasheet provides information on physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. Filing Code: Cp-5. Producer or source: G. E. Plastics.

AVIMID K is a tacky, drapable tape or fabric prepreg based on a thermoplastic polyimide resin system. This datasheet provides information on composition, physical properties, tensile properties, and compressive and shear strength. Filing Code: Cp-22. Producer or source: E. I. Dupont de Nemours & Company Inc..

ISOPLAST 101, unreinforced, is a rigid, amorphous polyurethane thermoplastic polymer. It is opaque and impact modified. It is injection moldable and extrudable. It is characterized by its high impact strength, high abrasion resistance, excellent chemical and solvent resistance and low moisture sensitivity. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on wear resistance. Filing Code: P-10. Producer or source: The Dow Chemical Company.

GRILON BT40X is an impact modified injection molding grade. It is an alloy between amorphous and semi-crystalline nylons. It offers a unique combination of toughness with high rigidity. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting. Filing Code: P-6. Producer or source: EMS-American Grilon Inc..

GRIVORY G 355 NZ is an unreinforced, amorphous, high-impact resistant engineering thermoplastic. It is opaque and has a natural ivory color. It can be processed by injection molding, extrusion and blow molding. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting. Filing Code: P-4. Producer or source: EMS-American Grilon Inc..

Metglas 2605 SA1 is an amorphous iron-base soft magnetic alloy designed for extremely low core loss at distribution and power transformer frequencies and inductions. Applications include high-frequency inductors and current transformers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, forming, and heat treating. Filing Code: FE-139. Producer or source: Metglas Inc.

ULTEM 6000 is an unreinforced, high-temperature polyeytherimide copolymer resin. It is an amorphous thermoplastic but unlike some high-temperature polymers, it does not crosslink during processing. It does not require post curing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming and machining. Filing Code: P-27. Producer or source: G. E. Plastics.

Metglas alloy 2705M is an amorphous cobalt-base alloy designed for shielding and high frequency cores. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: Co-122. Producer or source: Metglas Inc..

MAGNUM ABS 941, 9010, 9020, and 9030, amorphous thermoplastic resins have the highest gloss of any ABS resin. #MAGNUM low gloss resins 213, 341, 343, and 545 are covered in P-17 (July, 1990). This datasheet provides information on physical properties, hardness, and tensile properties as well as fracture toughness. Filing Code: P-18. Producer or source: The Dow Chemical Company, Dow Plastics.

ISOPLAST 201 is an opaque, impact modified thermoplastic polyurethane engineering resin for extrusion and injection molding. Its high heat distortion temperature sets it apart from ISOPLAST 101(described in Alloy Digest P-10, October 1989). It has high notched impact strength, excellent chemical and solvent resistance and high abrasion resistance. This datasheet provides information on physical properties, hardness, and tensile properties as well as fracture toughness. Filing Code: P-14. Producer or source: The Dow Chemical Company, Dow Plastics.

METGLAS MBF-75A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-75, is identical except that it has larger dimensional tolerances). It has excellent high-temperature strength and flows readily into narrow joints. Its high solidus temperature facilitates heat treatment of some superalloys without remelting the joint. It is recommended for joining high-temperature alloys and stainless steels. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on joining. Filing Code: Ni-286. Producer or source: Allied Corporation.

METGLAS MBF-17A is a brazing foil in ductile, flexible metallic-glass form (A similar grade, MBF-17, is identical except that it has larger dimensional tolerances). It provides high strength at both elevated and room temperatures with moderate oxidation and corrosion resistance. An example of application is brazing turbine blades in truck engines where high strength at high temperatures is required. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on forming, heat treating, and joining. Filing Code: Ni-303. Producer or source: Allied Corporation.

METGLAS MBF-50A is a brazing foil in ductile, flexible metallic-glass form (A similar grade, MBF-50, is identical except that it has larger dimensional tolerances). It was developed for high-temperature service. It provides high-strength joints with superior resistance against oxidation and corrosion. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on forming, heat treating, and joining. Filing Code: Ni-349. Producer or source: Allied Signal Corporation.

METGLAS MBF-80A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-80, is identical except that it has larger dimensional tolerances). It provides high-strength brazements at elevated temperatures and good moderate-temperature resistance to oxidation and corrosion. Its sluggish flow fills wide gaps up to 0.100 mm (0.004 inch). It is an excellent choice for diffusion brazing. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-290. Producer or source: Allied Corporation.

METGLAS MBF-35A is a brazing foil in ductile flexible metallic-glass form (a similar grade, MBF-35, is identical except that it has larger dimensional tolerances. It is a low-temperature filler metal foil designed for joining superalloys where the brazing operation should be done simultaneously during solution treatment. This foil exhibits excellent flow characteristics and will flow well into narrow joints. It is not recommended for use in severe corrosive atmospheres. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-296. Producer or source: Allied Corporation.