Search Results for aluminum brazing filler metals

AlcoTec Weld Filler Wire 5556 is a non-heat-treatable wire with very high strength capabilities. The principal alloying elements are magnesium, manganese, chromium, and titanium. This datasheet provides information on composition, physical properties, tensile properties, and shear strength. It also includes information on corrosion resistance as well as joining. Filing Code: AL-378. Producer or source: AlcoTec Wire Corporation.

NICROBRAZ 130 is a good general-purpose filler metal. It flows freely in marginal atmospheres, in deep or tight joints. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-468. Producer or source: Wall Colmonoy Corporation.

NICROBRAZE 10 is a free flowing, low melting, chromium-free filler metal, good for marginal atmospheres. It minimizes base metal erosion during the brazing operation. This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: Ni-448. Producer or source: Wall Colmonoy Corporation.

AlcoTec weld filler wire 4047 is a general-purpose high silicon containing wire for both welding and brazing. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on joining. Filing Code: AL-381. Producer or source: AlcoTec Wire Corporation.

AlcoTec weld filler wire 4145 is a general-purpose high-silicon-containing wire for both welding and brazing. The alloy is often used instead of 2319 for welding higher-strength alloys because of its low melting temperature and high fluidity. This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: AL-383. Producer or source: AlcoTec Wire Corporation.

Nicrobraz is a free-flowing nickel brazing filler metal with a wide melting range and low diffusion with most base metals. The brazing metal meets AWS, AMS, G.E., and other specifications. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-525. Producer or source: Wall Colmonoy Corporation.

Nicrobraz 152 is a high-chromium, oxidation-resistant nickel brazing filler metal with enhanced flow properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, joining, and powder metal forms. Filing Code: Ni-674. Producer or source: Wall Colmonoy Corporation.

NICROBRAZ 50 is a low-melting, free-flowing filter metal for honeycomb structures and thin-walled tube assemblies. It has low solubility. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-460. Producer or source: Wall Colmonoy Corporation.

NICROBRAZ LM is a low melting general-purpose brazing filter metal for applications requiring high joint strength and oxidation resistance up to 2200 F. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-452. Producer or source: Wall Colmonoy Corporation.

AlcoTec weld filler wire 4043 is a general-purpose high-silicon-containing wire for both welding and brazing. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on joining. Filing Code: AL-380. Producer or source: AlcoTec Wire Corporation.

METGLAS MBF-90/MBF-90A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-90, is identical except that is has larger dimensional tolerances. It is suitable for joining stainless steels and superalloys, including those containing aluminum and titanium. It provides high strength at elevated temperatures. This foil flows well into deep joints with narrow clearances. It is excellent for diffusion brazing. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-298. Producer or source: Allied Corporation.

AlcoTec Filler Metal 4643 is a reduced-silicon, magnesium-added filler metal used to weld the 6xxx series alloys. Welds meet the high mechanical properties of the 6xxx series, particularly in multipass welding and when low dilution exists. There is no advantage in using 4643 compared to 4043 or other filler metals when no heat treatment is done after welding. The corrosion resistance is very good. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: AL-324. Producer or source: AlcoTec Wire Corporation. Originally published August 1992, revised March 2002.

Alloy R-A357.0 includes aluminum-silicon-magnesium-beryllium Altigweld filler wire with a low iron content to weld alloys 357.0 and A357.0. (See Aluminum A357, Alloy Digest Al-163, February 1967, and Aluminum 357.0, Alloy Digest Al-238, May 1982.) This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: Al-326. Producer or source: AlcoTec Wire Corporation.

ALCOTEC Filler Metal 5180 is a weld wire in the Al-Zn-Mg aluminum family that responds to post-weld thermal treatments. The wire is especially useful to match base-metal strengths in thin walls. This datasheet provides information on composition and tensile properties. It also includes information on heat treating and joining. Filing Code: Al-325. Producer or source: AlcoTec Wire Corporation.

Alcotec Weld filler wire 5183 is a non-heat-treatable aluminum welding wire whose principal alloying elements are magnesium, manganese, and chromium. It is similar to the European wire AlMg4.5Mn. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on joining. Filing Code: AL-384. Producer or source: AlcoTec Wire Corporation.

Alcan 432 is a natural aging aluminum sand casting alloy that is not susceptible to stress corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-136. Producer or source: Aluminum Company of Canada Ltd.

AlcoTec Weld Filler Wire 5654 is a nonheatable wire with moderate high-strength capabilities. The principal alloying elements are magnesium, manganese, chromium, and titanium. This datasheet provides information on composition, physical properties, and shear strength. It also includes information on corrosion resistance as well as joining. Filing Code: AL-379. Producer or source: AlcoTec Wire Corporation.

MHZ 220 (mininum yield strength of 210 MPa) is one of a series of microalloyed cold forming steels. This datasheet provides information on composition and tensile properties as well as fatigue. It also includes information on wear resistance as well as joining. Filing Code: SA-818. Producer or source: ThyssenKrupp Steel Europe AG.

INCONEL Filler Metal 601 is a nickel-base alloy that is used for gas-tungsten-arc welding of INCONEL alloy 601. It is the preferred welding product for all gas-tungsten-arc welding of alloy 601. This weld metal is comparable to the base metal (INCONEL alloy 601) in resistance to corrosion and oxidation. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-329. Producer or source: Inco Alloys International Inc..

INCONEL Filler Metal 718 is used for gas-tungsten-arc welding of INCONEL alloys 718, 706 and X-750. The weld metal is age hardenable and its mechanical properties are comparable to those of the base metals. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-333. Producer or source: Inco Alloys International Inc..