Haynes Ti-3Al-2.5V alloy is used where the strength/weight ratio is of prime importance; the alloy is 43% lighter than 21-6-9 stainless steel. It is most often used in the form of seamless tubing for aircraft hydraulic systems. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TI-145. Producer or source: Haynes International Inc.

CABOT Ti-3A1-2.5V alloy is both lightweight and strong. It has a high strength-to-weight ratio which provides a major design advantage saving weight. It can be formed readily and it has good weldability. Seamless tubing of CABOT Ti-3A1-2.5V was developed for aircraft hydraulic and fuel systems and its performance has been proved by use in various types of aircraft and aerospace vehicles. CABOT Ti-3A1-2.5V is available as plate, sheet and seamless tubing and pipe. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-85. Producer or source: Cabot Wrought Products.

Nicomet 2 is a copper-nickel-tin alloy that has high strength because of spinodal decomposition. The alloy has good antifriction properties. Nicomet 2 could replace some beryllium-copper alloys. An example application for the alloy is a sleeve bearing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating. Filing Code: CU-653. Producer or source: Anchor Bronze & Metals, Inc.

AMPCOLOY C-3 is a copper-aluminum-iron alloy with high strength and hardness, good toughness, good resistance to fatigue and wear, and good corrosion resistance. It is used for heavy loads in such applications as bearings, gears and hydraulic valve parts. It is suited for service up to 750 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-334. Producer or source: Ampco Metal Inc..

Nicomet 1 is a copper-nickel-tin alloy that has high strength because of spinodal decomposition in heat treatment. The alloy could replace aluminum and manganese bronzes. A typical application utilizes both the good antifriction and high strength properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating. Filing Code: CU-652. Producer or source: Anchor Bronze & Metals, Inc.

AVIMID K is a tacky, drapable tape or fabric prepreg based on a thermoplastic polyimide resin system. This datasheet provides information on composition, physical properties, tensile properties, and compressive and shear strength. Filing Code: Cp-22. Producer or source: E. I. Dupont de Nemours & Company Inc..

MELTRON AM503 is a medium strength manganese type magnesium-base alloy which does not respond to a hardening heat treatment, but is useful where maximum formability, weldability, and resistance to corrosion are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-41. Producer or source: Magnesium Elektron Inc..

DOWMETAL M is a manganese type magnesium base alloy which does not respond to hardening heat treatment, but is recommended where maximum formability and weldability are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Mg-3. Producer or source: The Dow Chemical Company.

Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

Alcoa 6061 alloy has excellent joining characteristics and good acceptance of applied coatings. It combines relatively high strength, good workability, and high resistance to corrosion. The alloy is widely available. The T8 and T9 tempers offer better chipping characteristics than the T6 temper. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-349. Producer or source: ALCOA Wire, Rod & Bar Division.

ALUMINUM 7075 is a wrought precipitation-hardenable aluminum alloy having excellent mechanical properties, workability and response to heat treatment and refrigeration. (This alloy is covered under its previous designation, ALUMINUM 75S, in Alloy Digest Al-5, February 1953). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-179. Producer or source: Various aluminum companies.

ARMCO NITRONIC 40 Stainless Steel is one of the most versatile austenitic stainless steels with a room-temperature yield strength about twice that of AISI Types 304, 321 and 347. In addition, NITRONIC 40 has remarkably good elevated temperature properties and oxidation resistance. It retains high toughness down to -423 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-327. Producer or source: Armco Advanced Materials Corporation. Originally published as Nitronic 40, May 1976, revised August 1990.