ANACONDA Copper 122 is deoxidized copper with high residual phosphorus. It is a medium-strength material with high ductility and excellent hot and cold workability. It is the copper-base material used most widely in the production of tube and pipe for a wide variety of uses including the air-conditioning, refrigeration, heating and plumbing industries. Anaconda Copper 122 also is used as wrought plating anodes in the acid-copper plating industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-400. Producer or source: Anaconda American Brass Company.

Aurubis C12200 (Cu-DHP) is a phosphorus-deoxidized copper, that contains a minimum of 99.9% copper and high residual phosphorus (0.015–0.040%). It is the most widely used copper for tube and pipe but also finds widespread use for sheet and strip items. Aurubis C12200 exhibits better ductility than Cu-ETP and is adaptable for progressive drawing operations requiring few or no intermediate anneals. A major advantage of Aurubis C12200 is the freedom from hydrogen embrittlement susceptibility in reducing atmospheres. This advantage is utilized in the cladding of steel and subsequent reducing atmosphere anneals without incurring the embrittlement, which occurs when cladding with Cu-ETP. The electrical and thermal conductivity are lower when compared with Cu-ETP but adequate for many applications as exemplified by a major use of strip to produce air conditioning and refrigeration tubing by gas shielding arc welding techniques. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-934. Producer or source: Aurubis AG.

CANNON-MUSKEGON A-2 is a high-carbon air-hardening cast tool steel with excellent non-deforming properties and abrasion resistance in the quenched and tempered condition. It has good machinability in the annealed condition. A higher silicon content is permissible in this cast steel than in AISI A2 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-257. Producer or source: Cannon-Muskegon Corporation.

Latrobe BR-4 is a high-vanadium, high-chromium tool and die steel of the air hardening and nondeforming type. In the hardened condition it is extremely abrasion resistant. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: TS-1. Producer or source: Latrobe Steel Company.

GRAPH-M.N.S. is an air or oil hardening steel containing free graphite. In the hardened condition it has high resistance to scuffing, galling and seizing. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: TS-13. Producer or source: Timken Roller Bearing Company.

CARPENTER No. 610 is a high-carbon, high-chromium tool steel with extremely high wear-resisting properties. It has very high hardenability (air hardening) and will be practically free from size changes after proper treatment. Its high percentage of chromium gives it mild corrosion resistance in the hardened condition. Typical applications include various types of dies, slitting cutters, heading tools and intricate punches. This datasheet provides information on composition, physical properties, and hardness as well as deformation. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-358. Producer or source: Carpenter.

GUTERL D-7 is a high-carbon, high-chromium, high-vanadium tool and die steel. It is air hardening and therefore offers an extremely high degree of dimensional stability in heat treatment. In the hardened condition it has extremely high resistance to abrasion and wear. Its many applications include blanking and cold-drawing dies, punches, burnishing tools, slitter knives and gages. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating and machining. Filing Code: TS-361. Producer or source: Guterl Special Steel Corporation.

CRUCIBLE C-120AV is an alpha-beta type titanium-base alloy with 120,000 psi minimum yield strength in the annealed condition. It has good forming characteristics, is weldable with proper shielding and can be heat treated to high strength levels by solution treating and aging. Its many applications include components for gas-turbine compressors, air-frame forgings, pressure vessels and special ordnance equipment. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength as well as fracture toughness, creep, and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-77. Producer or source: Crucible Specialty Metals Division, Colt Industries.

GUTERL H-13 is an air-hardening chromium-molybdenum-vanadium tool steel that finds wide use as dies in the forging, extrusions and die-casting industries. It has good hot hardness and wear resistance, extreme toughness and high resistance to heat checking and erosive action. Also, it has excellent machinability in the annealed condition and relatively good freedom from distortion and scaling during heat treatment. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-405. Producer or source: Guterl Special Steel Corporation.

Sandvik SANDAR 64 is an air-hardening high nickel alloy steel with good response to carburizing. It has excellent fatigue strength and wear resistance in the case hardened condition. Common applications include extension and shank rods. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: SA-503. Producer or source: Sandvik.

Sandvik SANBAR 23 is an air-hardening, high chromium molybdenum alloy steel suitable for carburizing and with good response to surface induction hardening. It has high fatigue strength and wear resistance in the case hardened condition. The alloy is used for extension and shank rods. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: SA-504. Producer or source: Sandvik.

Armco 420 is an iron-chromium stainless steel with added carbon content (0.3% nominal) for higher hardness. The alloy is ferritic in the annealed condition and martensitic after rapid cooling in air or a liquid medium from above the critical temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-781. Producer or source: Armco International Sales.

SICROMO-5S is a low-carbon, 5% chromium alloy steel recommended for applications in which a high degree of surface stability under oxidizing conditions is required for temperatures up to 1500 F. It is used in air prehealer tubes, recuperater and superheater tubes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-232. Producer or source: Timken Company Steel Division.

Nicrobraz 31 is a high-chromium, oxidation-resistant nickel braze filler metal with enhanced flow properties. This datasheet provides information on composition. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-614. Producer or source: Wall Colmonoy Corporation.

MUELLER Copper 1220 is a deoxidized copper with high residual phosphorus (nominally 0.02%). It has rather low electrical conductivity but it is not susceptible to embrittlement by hydrogen. Its low electrical conductivity is mainly caused by the phosphorus. It has excellent cold-working characteristics and can be joined by several methods. Among its many applications are air conditioners, gas lines, heater lines, oil-burner and plumbing tubes, dairy tubes and oil lines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-495. Producer or source: Mueller Brass Company.

The Ovahyd 600, 650, 700 family of steels encompasses a range of strength levels. The steels have a guaranteed yield strength matching the name. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, machining, and joining. Filing Code: SA-548. Producer or source: Ovako Steel Inc.

COPPER ALLOY No. C36000 is a free cutting brass that is widely used in components and systems-products controlling motion, flow and pressure. High productivity, extended cutting tool life and good corrosion resistance are among its assets. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-548. Producer or source: Brass mills.

AL TECH CHEROKEE is a high-carbon, high-chromium die steel containing nominally 3.25% cobalt. The cobalt provides effective resistance to galling and pickup as well as improved hot hardness. The cobalt enables this steel to perform exceptionally well on both extended cold-work and moderate hot-work applications. Another feature of this versatile die steel is its outstanding secondary hardness associated with remarkable tempering resistance up to 900 F. Typical applications comprise blanking dies, swaging dies, hot and cold-piercing punches, forming rolls, shear blades and coining dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-465. Producer or source: AL Tech Specialty Steel Corporation.

Ovahyd 450 is a steel developed for highly stressed cylinder and piston rod applications in the hydraulic industry. The yield strength (MPa) corresponds to the alloy name. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, machining, and joining. Filing Code: SA-544. Producer or source: Ovako Steel Inc.

UGI 4542 AIR is a martensitic precipitation hardening stainless steel with strong corrosion resistance and high mechanical performance. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1300. Producer or source: Schmolz + Bickenbach USA Inc..