SAE 10053 is an oil or water-hardening machinery and tool steel for applications where a shallow-hardening steel of high strength with moderate toughness meets the requirements. It is commonly used for parts where induction hardening or austempering are employed. SAE 1053 is recommended for agricultural machinery and tools, hand tools, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-70. Producer or source: Carbon steel mills.

AISI 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-92. Producer or source: Carbon steel mills.

AISI 1551 is a medium-carbon steel containing relatively high manganese (0.85-1.15%) for a carbon steel. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. It has a combination of good machinability and good workability. Its many uses include hand tools, machinery parts, springs and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-80. Producer or source: Carbon steel mills.

SAE 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-116. Producer or source: Carbon steel mills.

AISI 1566 is a high-carbon (nominally 0.66% carbon) steel containing 0.85-0.15% manganese. Its hardenability is low and on austenitizing and liquid quenching it develops a hard (martensitic) surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a wide range of applications. It has good machinability and good workability. Its many uses include springs, shafts, hand tools, railway parts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-100. Producer or source: Carbon steel mills.

Dillidur 400V is a wear-resistant steel with surface hardness at room temperature of 370–430 HB. The steel is easy to weld, bend, and machine. Because of its high wear resistance and good welding performance, 400V is used in the production of agricultural machinery and industrial truck systems; it also finds use in crushing plants and waste disposal plants. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-636. Producer or source: Dillinger Hütte GTS.

AISI 1055 is a high-carbon oil or water-hardening tool and machinery steel recommended for hand tools, agricultural tools and machinery, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-49. Producer or source: Carbon steel mills.

SAE 1055 is a high-carbon oil or water-hardening tool and machinery steel recommended for hand tools, agricultural tools and machinery, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: CS-117. Producer or source: Carbon steel mills.

UNS No. G10780 is a plain carbon steel; it has low hardenability and a high carbon content (nominally 0.78%). It can be hardened by quenching into oil or water from the austenitizing temperature; care must be exercised to prevent cracking when quenching into water. This steel develops high surface hardness and a soft core on quenching and tempering lightly. It has good wear resistance. Its many uses include agricultural equipment, tools, springs, and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-105. Producer or source: Carbon steel mills.

SAE 1078 is high-carbon steel of low hardenability. It can be hardened by quenching from the austenitizing temperature into oil or water; care must be exercised to prevent cracking when quenching into water. This steel develops high surface hardness and a soft core on quenching and tempering lightly. It has good wear resistance. Its many uses include agricultural equipment, tools, springs and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-83. Producer or source: Carbon steel mills.

TBL is a wear-resistant special structural steel with boron as heavy plate that is normalized with thicknesses up to 100 mm (3.9 in.) made of fine-grained structural steel TBL. This datasheet provides information on composition and tensile properties. It also includes information on forming and heat treating. Filing Code: SA-808. Producer or source: ThyssenKrupp Steel Europe AG.

TBL Plus is a wear-resistant special structural steel with boron as heavy plate that is normalized with thicknesses up to 12 mm (in.) made of fine-grained structural steel. This datasheet provides information on composition and tensile properties. It also includes information on wear resistance as well as forming and heat treating. Filing Code: SA-811. Producer or source: ThyssenKrupp Steel Europe AG.

Ympress Laser S420MC (EN 10149-2) is a hot-rolled, high-strength, low-alloy steel with 420 MPa minimum yield strength. It is optimized for efficient laser cutting and post-cut processing. This datasheet provides information on composition, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming. Filing Code: SA-758. Producer or source: Tata Steel.

AISI 1065 is a high-carbon oil-hardening machinery and tool steel of low hardenability. It is used for springs, hand tools, machinery parts, shafts and many machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-63. Producer or source: Carbon steel mills.

SAE 1065 is a high-carbon oil-hardening machinery and tool steel of low hardenability. It is used for springs, hand tools, machinery parts, shafts and many machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-118. Producer or source: Carbon steel mills.

Domex 110XF is a very-high-strength steel that is used for automotive and civil engineering structural components. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-512. Producer or source: SSAB Swedish Steel Inc.

AISI 1086 is a high-carbon water of oil-hardening steel of low hardenability. It is used for music wire, tools springs, machinery parts and many other applications. It develops high surface hardness on quenching and tempering lightly and has good wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-57. Producer or source: Carbon steel mills.

SAE 1070 is a high-carbon water or oil-hardening tool and spring steel of low hardenability. It is used for railroad and street railway rails, heavy machinery parts, shafts, springs and a wide variety of hand and machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-121. Producer or source: Carbon steel mills.

UNS No. G10860 is a high-carbon oil or water-hardening steel of low hardenability. It develops high surface hardness on quenching rapidly and tempering lightly and it has good resistance to wear. It is used for tools, springs, music wire, machinery parts and many other applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-112. Producer or source: Carbon steel mills.

SAE 1046 can be used in a variety of conditions: hot rolled, annealed, normalized, oil quenched and tempered, water quenched and tempered or austempered. It is a general-purpose construction and machinery steel. It furnishes medium strength and toughness at a low cost. It is frequently used for flame or induction-hardened parts. Its many uses include axles, bolts, pins, shafts and forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-81. Producer or source: Carbon steel mills.