Search Results for Vanadium type D

VANADIUM TYPE D is a medium carbon, chromium-vanadium tool steel having high strength, toughness and fatigue resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-52. Producer or source: Vanadium Alloys Steel Company.

FAGERSTA D-950 is a high-speed steel that combines economic considerations in a properly balanced chemical analysis. An optimum carbon-vanadium ratio provides a high attainable hardness along with good mechanical properties. Its wide hardening range and excellent response to secondary hardening is rather unique and can offer some advantages in heat treatment. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-307. Producer or source: Fagersta Steels Inc..

GUTERL D-7 is a high-carbon, high-chromium, high-vanadium tool and die steel. It is air hardening and therefore offers an extremely high degree of dimensional stability in heat treatment. In the hardened condition it has extremely high resistance to abrasion and wear. Its many applications include blanking and cold-drawing dies, punches, burnishing tools, slitter knives and gages. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating and machining. Filing Code: TS-361. Producer or source: Guterl Special Steel Corporation.

VAN CUT is a tungsten-molybdenum high-speed steel adaptable to both heavy duty cutting and fine finishing. This datasheet provides information on composition and physical properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-103. Producer or source: Vanadium Alloys Steel Company.

AISI Type W2 is a water-hardening high-carbon tool steel recommended for general applications. Its vanadium content prevents austenite grain growth and improves its toughness and its resistance to fatigue and abrasion. It is shallow hardening and in sizes over 1/2-inch in diameter, it hardens selectively with a hard, abrasion-resistant surface supported by a softer and tougher core. These characteristics make it desirable for many types of impact tools. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: TS-267. Producer or source: Tool steel mills.

CRUCIBLE CPM 10V is a unique tool steel made by the Crucible Particle Metallurgy (CPM) process. It is designed with a tough, air-hardening base analysis with added high carbon and vanadium. This provides CPM 10V with a combination of exceptionally good wear resistance, toughness and strength for cold and warm-work applications. It is an excellent candidate to replace carbide and other highly wear-resistant materials in cold-work tooling applications, particularly where tool breakage or chipping is a problem or where cost effectiveness can be demonstrated. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-340. Producer or source: Crucible Specialty Metals Division, Colt Industries. Originally published October 1978, revised February 1987.

VANITE is a high-carbon, high-vanadium modification of the 18W-4Cr-IV (AISI Type T1) high-speed tool steel. Its increased alloy content provides increases in cutting efficiency and wear resistance. Vanite is especially suitable for light cuts at high speeds that produce a fine surface finish. It will hold a keen cutting edge and because of this it is used primarily for broaches, reamers and finishing tools. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating and machining. Filing Code: TS-458. Producer or source: Columbia Tool Steel Company.

AL Tech DBL-3 is a molybdenum-type of high-speed steel containing relatively high carbon and vanadium to provide high resistance to abrasion. It shows marked superiority over many other high-speed steels in applications where abrasion resistance is a factor. Its many applications include taps, milling cutters, broaches and drills. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-347. Producer or source: AL Tech Specialty Steel Corporation.

COLONIAL NO. 4 is a water-hardening, high carbon tool steel containing about 3 1/2% tungsten. This datasheet provides information on composition and hardness. It also includes information on forming, heat treating, and machining. Filing Code: TS-53. Producer or source: Vanadium-Alloys Steel Company.

Orion is a chromium-vanadium tool steel generally used where strength and toughness are of greater importance than extreme hardness. It is relatively shallow hardening, tough, and wear resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: TS-54. Producer or source: Cyclops Corporation.

CROCAR is an air or oil hardening high-carbon high-chromium die steel having extreme wear and abrasion resistance. It is equivalent to AISI Type D4 and ASM Class IID-3. This datasheet provides information on composition, hardness, and compressive strength as well as deformation. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-44. Producer or source: Vanadium Alloys Steel Company.

VASCO M-2 is a general purpose high-speed steel of the tungsten-molybdenum type. The steel combines to an excellent degree resistance to wear toughness. Not particularly susceptible to decarburization. This datasheet provides information on composition, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-7. Producer or source: Vanadium Alloys Steel Company. Originally published June 1953, revised June 1959.

HOTFORM No. 1 is a 5% chromium hot work steel containing molybdenum, tungsten and vanadium. It has maximum toughness at high strength levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness, and deformation. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-60. Producer or source: Vanadium Alloys Steel Corporation.

Hotform V is a medium-carbon, 5% chromium hot work tool and die steel having improved wear resistance and hot hardness at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-113. Producer or source: Vanadium Alloys Steel Company.

Hiperco 50 is a cobalt-iron-vanadium soft magnetic alloy for high flux levels. It has high permeability at high inductions and low d-c coercive force. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming and heat treating. Filing Code: Co-50. Producer or source: Westinghouse Electric Corporation.

UHB Regin 3 is a chromium-tungsten-vanadium tool steel characterized by good toughness (especially when exposed to impact stresses), high red hardness, good wear resistance and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-291. Producer or source: Uddeholm Aktiebolag.

RED CUT COBALT steel is made by adding 5% cobalt to the conventional 18% tungsten -4% chromium-1% vanadium high-speed steel. Cobalt increases hot or red hardness and thus enables the tool to maintain a higher hardness at elevated temperatures. This steel is best adapted for hogging cuts or where the temperature of the cutting point of the tool in increased greatly. It is well adapted for tools to be used for reaming cast-iron engine cylinders, turning alloy steel or cast iron and cutting nonferrous alloys at high speeds. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-367. Producer or source: Teledyne Vasco.

COLONIAL No. 6 is an oil hardening, non-deforming, general purpose tool and die steel. It has good combination of abrasion resistance, hardness and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as deformation. It also includes information on forming, heat treating, and joining. Filing Code: TS-94. Producer or source: Vanadium-Alloys Steel Company.

OHIO DIE is a high-carbon high-chromium air hardening steel providing outstanding wearing ability with correspondingly long die life in service. It is equivalent to AISI Type D2 and ASM Class II D2. This datasheet provides information on composition, hardness, and bend strength as well as deformation. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-56. Producer or source: Vanadium-Alloy Steel Company.

MOLITE 4 is a high-carbon, high-vanadium, tungsten-molybdenum high-speed steel that approaches the ultimate in wear resistance for high-speed steels in this group. The advantages in using this steel comprise (1) Very high wear resistance, (2) High red hardness, (3) Good toughnes and (4) Moderate grindability. Among its many uses are punches and dies for blanking and forming thin sheet, milling cutters, twist drills, reamers, forming rolls, cold-extrusion punches and draw dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-447. Producer or source: Columbia Tool Steel Company.