HP magnet steel is designed for use wherever high magnetic permeability or high saturation values are required. Its magnetic qualities result from careful control of sulfur and residual elements plus the special deoxidization practice, which minimizes nonmetallic inclusions. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-144. Producer or source: ISG Plate International Steel Group Inc.

1006 is a wrought low-carbon (carbon ≤ 0.08%) non-alloy steel that is used in the as rolled, annealed, normalized, or cold worked condition. This steel is characterized by low strength, high ductility, excellent cold formability, and excellent weldability. Within the carbon range of this steel grade, both strength and hardness will increase with increase in carbon and with cold work. Such increases in strength are at the sacrifice of ductility or the ability to withstand cold deformation. 1006 is widely used for lightly stressed parts where cold formability or drawability is the primary requisite. In general, it is not intended for heat treatment after cold working. 1006 may, however, be used in the carburized or carbonitrided, and subsequently quench hardened and tempered, condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CS-232. Producer or source: Data Survey.

1006 is a wrought low-carbon (carbon ≤ 0.08%) non-alloy steel that is used in the as rolled, annealed, normalized, or cold worked condition. This steel is characterized by low strength, high ductility, excellent cold formability, and excellent weldability. Within the carbon range of this steel grade, both strength and hardness will increase with increase in carbon and with cold work. Such increases in strength are at the sacrifice of ductility or the ability to withstand cold deformation. 1006 is widely used for lightly stressed parts where cold formability or drawability is the primary requisite. In general, it is not intended for heat treatment after cold working. 1006 may, however, be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-267. Producer or source: Heat Treater's Guide.