TIMETAL 10-2-3 is a high fracture toughness titanium-base alloy. It is metallurgically near-beta and is capable of attaining a wide variety of strength levels, depending uopn the selection of heat treatment. Major advantages of this alloy are: (1) Its excellent forgeability, (2) Its high toughness in air and salt-water environments and (3) Its high hardenability which provides good properties in sections up to five inches thick. It is used in the aerospace industry for applications up to 600 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-80. Producer or source: Titanium Metals Corporation (Timet). Originally published as Ti-10V-2Fe-3Al, December 1980, revised October 1992.

Timetal 551 is an improved-strength version of Timetal 550 alloy that retains good forging characteristics. The alpha-beta alloy has a nominal composition of Ti-4Al-4Mo-4Sn-0.5 Si, and it is used in gas turbine engine parts. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TI-138. Producer or source: Timet.

TIMETAL 834 is a Ti-5.8Al-4Sn-3.5Zr-0.7Nb-0.5Mo-0.35Si-0.06C alloy with high strength and creep resistance up to 593 C (1100 F). The alloy is workable and weldable. It is used in the aerospace industry for rings and compressor disks. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: TI-116. Producer or source: Timet.

TIMETAL 3-2.5 (Ti-3%Al-2.5%V) alloy is cold formable and weldable. This alloy is used primarily for honeycomb foil and hydraulic tubing applications. Industrial applications, such as pressure vessels and piping, also utilize this alloy. The alloy is available with palladium stabilization to enhance corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on heat treating. Filing Code: TI-114. Producer or source: Titanium Metals Corporation (Timet).

Timetal 407 (Ti407) is a wrought, heat-treatable, alpha–beta, Ti-V-Al-Si-Fe alloy that excels in applications requiring resistance to impact, explosive blast, and/or other forms of shock loading. Its properties are generally similar to those of Ti-6Al-4V or Ti-3Al- 2.5V; however, in comparison, Timetal 407 can provide considerable cost savings by being significantly easier to process and machine. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Ti-176. Producer or source: TIMET.

Timetal 6-2-4-6 is an alpha-beta alloy with greater strength in thicker sections than Timetal 6-4. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on forming. Filing Code: TI-141. Producer or source: Timet.

Timetal 6-4 and its variations are general-purpose, widely used alpha-beta titanium alloys. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on forming and joining. Filing Code: TI-143. Producer or source: Timet.

TIMETAL 65A is a general purpose grade of commercially pure titanium that has excellent corrosion resistance to highly oxidating to mildly reducing environments, including chlorides, and an excellent strength-to-weight ratio. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TI-147. Producer or source: Timet.

Timetal 54M has better machinability than TI-6Al-4V with comparable properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and machining. Filing Code: TI-146. Producer or source: Timet.

TIMETAL 62S, because iron is used for the beta stabilizer in lieu of more expensive elements, has a lower formulation cost than most titanium alloys, yet the properties and processing characteristics of Ti-6A1-2Fe-0. 1Si are equivalent to or better than those of the workhorses of the titanium industry, including Ti-6A1-4V. The combination of reasonable cost and excellent mechanical properties make TIMETAL 62S a practical substitute for other engineering materials in numerous industrial applications that require low weight and high corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating. Filing Code: Ti-102. Producer or source: Timet.

TIMETAL 679 is a Ti-11Sn-5Zr-2.25Al-1Mo-0.2Si alloy with three phases at room temperature. It has high strength with creep resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on forming and heat treating. Filing Code: TI-126. Producer or source: Timet.

TIMETAL 75A is the highest-strength commercially pure sheet grade. It is readily formed at room temperature, but warm forming is frequently used to reduce springback and the power requirements. Complex forms must be made by warm forming. This material is weldable by both electrical resistance and fusion procedures, although the latter methods can be used only if the material is protected from atmospheric contamination. Machining requires a rigid tool setup, slow speed, heavy feed, sharp tools, and adequate coolant. This material is used in aircraft and chemical process applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-121. Producer or source: Timet.

TIMETAL 15-3 is a metastable beta titanium alloy that offers substantial weight reductions over other engineering materials. In the solution treated condition, it has excellent cold formability; in the aged condition, it has high strength. TIMETAL 15-3 is usually acceptable for use at temperatures up to 550 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and heat treating. Filing Code: Ti-101. Producer or source: Titanium Metals Corporation (Timet).

TIMETAL 829 is a Ti-5.5Al-3.5Sn-3Zr-1Nb-0.25Mo-0.3Si near-alpha titanium alloy that is weldable and has high strength and is a creep resistant high temperature alloy. The major application is as gas turbine engine components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on forming and heat treating. Filing Code: TI-118. Producer or source: Timet.

Timetal 230 is a binary alloy of titanium with 2.5% Cu to produce a cold-formable medium-strength alloy that can be used up to 350 deg C (660 deg F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on forming and heat treating. Filing Code: TI-144. Producer or source: Timet.

Timetal 6-2-4-2 has a combination of tensile strength, creep strength, toughness, and high-temperature stability for long-term application at temperatures up to 538 deg C (1000 deg F). This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: TI-140. Producer or source: Timet.

Timetal Grade 12 is a lean alloy, but exhibits better corrosion resistance and higher strength than grade 2. This datasheet provides information on composition, physical properties, tensile properties. and bend strength. It also includes information on corrosion resistance as well as forming. Filing Code: Ti-153. Producer or source: Timet.

Timetal 685 is a titanium alloy with 6 Al, 5 Zr, 0.5 Mo, and 0.25 Si. It is a near-alpha alloy with high strength and creep resistance. Applications are in the aerospace industry. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on forming, heat treating, and joining. Filing Code: TI-142. Producer or source: Timet.

Timetal Exhaust XT is a lean alloy, but exhibits good corrosion resistance and higher strength than needed for automotive exhaust. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: Ti-156. Producer or source: Timet.

Titanium shows outstanding resistance to seawater and marine atmospheres. It is also resistant to attack by hot metallic chloride solutions, sodium and potassium hypochlorite, and chlorine dioxide. The metal is resistant to attack by hot nitric acid at concentrations up to 80% and is not attacked by sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-122. Producer or source: Timet.