Skip Nav Destination
Search Results for Sanicro 71
1-5 of 5 Search Results for
Alloy Digest (1965) 14 (12): Ni-108.
Published: 01 December 1965
... Sanicro 71 is a nickel-base alloy having good resistance to stress-corrosion, oxidation and creep at elevated temperatures. It is recommended for nuclear power reactor heat exchanger tubes, aircraft turbojet engines and for equipment in the textile, plastic, and chemical industries. This datasheet...
Alloy Digest (1996) 45 (4): SS-643.
Published: 01 April 1996
... should be carried out with a low heat input. As filler metal for gas-shielded arc welding the producer recom- mends wire elecuodes and rods Sandvik Sanicro 72. In manual metal-arc welding covered electrodes Sandvik Sanicro 71 are recommended. This filler material has a high nickel content and therefore...
Alloy Digest (1994) 43 (10): Ni-467.
Published: 01 October 1994
..., Sandvik Sanicro 72 is recommended. For manual metal-arc welding Sandvik San&o 71 is the fint choice. Fabricability: Bending: The excellent formability of Sanicro 69 permits cold bending to the smakt bending and radii without any risk for stress corrosion crack@ (SCC). Annealing is normally not necessary...
Alloy Digest (1995) 44 (11): SS-622.
Published: 01 November 1995
... or 19.9.LR are recom- mended. For application at temperatures above 4OO C (750°F). wire elec- nodeshods Sandvik-Sanicro 72 should be used in gas-shielded arc welding and covered electrodes Sanicro 72 in manual metal- arc welding. (Sanicro is a trademark of Sandvik AB) Corrosion Resistance: General...
Alloy Digest (1997) 46 (11): SS-699.
Published: 01 November 1997
...- mends wire electrodes and rods Sandvik 72. In manual metal-arc welding covered ekcmdes Sandvik Sanicro 72 are recom- mended. For application at temperatures up to 400 C (750 m. welding wire/d Sandvik 19.9.NbSi. 19.9.Nb. 19.9.LSi or 19.9.L and covered electmdes Sandvik 19.9.NbR or 19.9LR are recommended...