SP 700 is a high strength, beta-rich alpha-beta titanium alloy. It was developed with the following attributes: (1) excellent hot- and cold-workability; (2) enhanced hardenability with a wide range of mechanical properties that can be obtained by heat treatment; and (3) superior superplastic behavior at low temperature (around 1050 K). This datasheet provides information on composition, physical properties, microstructure, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance as well as heat treating. Filing Code: TI-107. Producer or source: NKK Corporation.

SPS Technologies MP159 is a cobalt-nickel multiphase alloy that possesses a unique combination of ultra-high strength, good ductility and toughness, and excellent corrosion resistance. This alloy was developed in response to the need for a fastener alloy that could perform under the higher operating temperatures required for turbine engines and other high performance motors. It has advantages similar to MP35N but can perform in applications up to 593 °C (1100 °F) and is suitable for short term use at even higher temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Co-138. Producer or source: SPS Technologies, Inc.

DUCTLIRON is a high-carbon ferrous material containing graphite in the form of nodules or spheroids. It possesses unusually high ductility, strength and castability. It is furnished in three different grades, namely, SF-60, SP-80 and SH-100. Alloyed grades are also available under different designations as AQS-HS and WS. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-33. Producer or source: Rosedale Foundry.

MP159 Alloy is a member of the Multiphase family of alloys possessing the unique combination of ultra-high strength, ductility and corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, elasticity, and shear strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-68. Producer or source: Latrobe Steel Company. Originally published as Multiphase MP159 Alloy, May 1974, revised June 1990.

Duralcan F3S.xxS is a heat treatable aluminum alloy-matrix gravity composite. The base alloy is similar to Aluminum 359 (Alloy Digest Al-188, July 1969); the discontinuously reinforced composite is silicon carbide. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance. Filing Code: AL-329. Producer or source: Alcan Aluminum Corporation.

Copper C10300 combines good electrical conductivity with excellent hot and cold fabricability and joining characteristics (welding and brazing). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-561. Producer or source: Copper and copper alloy mills.

RMI 8Mn is an alpha-beta titanium alloy that provides a guaranteed room-temperature minimum tensile strength of 120,000 psi in the mill-annealed condition. This alloy offers good formability and excellent resistance to corrosion in applications requiring high strength-to-weight ratios at temperatures up to 700 F. Its uses include aircraft sheet components and structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-82. Producer or source: RMI Company.

CERAMVAR is an iron, nickel, cobalt alloy specially designed and suited for ceramic-to-metal sealing. It has expansion characteristics closely matching those of high temperature alumina ceramics. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, machining, joining, and surface treatment. Filing Code: Fe-21. Producer or source: Wilbur B. Driver Company.

Viscount 44 is a free machining ready-to-use Type H 13 hot work die steel with good strength retention at 800-1000 F (427-538 C). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: TS-97. Producer or source: Latrobe Steel Company. Originally published September 1960, revised March 1990.

AISI 3250 is a medium carbon, nickel, chromium alloy steel having high tensile and fatigue strength in the heat treated condition. It is recommended for heavy duty service. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-101. Producer or source: Alloy steel mills and foundries.

COPPER No. 122 is a deoxidized copper with high residual phosphorus. It is not susceptible to hydrogen embrittlement but has rather low electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-253. Producer or source: Copper and copper alloy mills.

RED BRASS, 85% is a copper-zinc alloy having high corrosion resistance to water and high resistance to stress-cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-103. Producer or source: Brass mills.

LSS A286 is a precipitation-hardening, austenitic stainless steel designed for use at temperatures up to 704 deg C (1300 deg F), where high tensile strength, excellent creep strength, and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-1050. Producer or source: Latrobe Specialty Steel Company.

AMAX-LP is an oxygen-free low phosphorus copper produced from a high purity oxygen-free copper. It has a minimum electrical conductivity of 90% IACS and is used in applications such as refrigerator tubing and components where a material having a somewhat lower electrical conductivity than that specified for DLP copper can be employed. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-273. Producer or source: Amax Copper Inc..

Temper Tough alloy is an air-melted quenched and tempered steel with high strength and high toughness. This datasheet provides information on composition, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-650. Producer or source: Carpenter Technology Corporation.

SANDVIK 12R72HV is an austenitic chromium-nickel-molybdenum-titanium stainless steel suitable for metal temperature up to about 308 in the power industry and the petrochemical industry. Typical applications are superheater tubes and hydrocarbon crackers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: SS-248. Producer or source: Sandvik.

U.S.S. 17 is high-chromium, corrosion resistant steel of the Type 430 classification. It is moderately ductile and non-hardenable through heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-104. Producer or source: United States Steel Corporation.

AMAX-XLP is an oxygen-free low-phosphorus copper identical in electrical conductivity to that specified for deoxidized low-phosphorus (DLP) copper, but with a lower phosphorus range than that required in DLP copper. AMAX-XLP is produced from high-purity oxygen-free copper; this results in predictable effective phosphorus content and thus predictable consistent performance. It is ideal for applications where a low phosphorus content is beneficial and good conductivity and good resistance to embrittlement are needed. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-272. Producer or source: Amax Copper Inc..

CONSIL 901 is the most commonly used of the silver-copper electrical contact alloys. It has higher hardness and better resistance to wear than fine silver. It is used widely for light and medium-duty applications involving electrical-contact devices. This datasheet provides information on composition, physical properties, microstructure, tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, joining, and surface treatment. Filing Code: Ag-9. Producer or source: Handy & Harman.

SPARTA is an intermediate air-hardening alloy tool and die steel of the chromium-molybdenum type (A-2). This datasheet provides information on composition, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-18. Producer or source: Cyclops Corporation.