1-14 of 14 Search Results for

SIMONDS M-2

Sort by
Journal Articles
Alloy Digest (1978) 27 (12): TS-343.
Published: 01 December 1978
... SIMONDS M-2 is a general-purpose high-speed steel with excellent resistance to abrasion and shock. It is a molybdenum-tungsten type of high-speed steel and is not particularly susceptible to decarburization. Its many applications include lathe tools, gear cutters, thread chasers and circular saws...
Journal Articles
Alloy Digest (1975) 24 (1): Ni-213.
Published: 01 January 1975
... diesel engines elasticity fatigue strength gasoline heat treatability joinability machinability physical properties tensile properties wear resistance workability ALLOY VMS-513 Filing Code: M-213 Nickel Alloy JANUARY 1975 - DATA ON WORLD WIDE METALS AND ALLOYS Pablisbed by Eaghering AIloys...
Journal Articles
Alloy Digest (1967) 16 (3): Co-51.
Published: 01 March 1967
... of 18 m/min., 0.1 mm, feed and a depth of cut of 3 mm. for roughing and 1 mm. for fiaishiog. For dry facing operation use cutting speed of 15 m/min., feed of 0.3-0.4 mm for rough- ing and 0.3 mm for finishing, and a depth of cut of 3 mm for roughing and 1 mm for finishing. Kenna- metal K29 or K6...
Journal Articles
Alloy Digest (2008) 57 (9): Ni-665.
Published: 01 September 2008
... mesh (63 m) + 15 m Applications: Coatings of Colmonoy 63HV are used for hard surfacing petroleum industry components such as gate valves, pump sleeves, pump shafts, bushings, wear rings, and compressor rods; they can also be used to restore dimensions. Coatings of Colmonoy 63HV are also used...
Journal Articles
Alloy Digest (1956) 5 (2): TS-43.
Published: 01 February 1956
... reheating is recommended.. Specification Equivalents: ASM Class IV A-2 Crescent Hor Work No. 2 Crucible Fgt Work Die Disston select M LZ& Chrome Hor Die Simonds Ajax Choice No. 1 universal-cyciops Vulcan No. 4HW vanadium Alloys Vulcan General Characteristics: C. Y. W. Choice is a chromium ahoy hor-work...
Journal Articles
Alloy Digest (1962) 11 (5): TS-118.
Published: 01 May 1962
... 59.0 58.5 57.5 54.0 47.0 Ft. Ibs. 2:: 9.0 9.0 10.0 11.0 11.0 14.0 Rc 63.5 62.0 60.0 59.0 58.0 57.0 54.0 Ft. Ibs. 2.0 7.0 7.5 8.0 88:; 10.5 DOI: 10.31399/asm.ad.ts0118 Copyright © ASM International® 1996 teapm (nmtd 10 muuter mt l%Sn°F t&m qusnc)vd Into l qt at-. and h&l ta rvlsur tlma kfom voter ournoh...
Journal Articles
Alloy Digest (1959) 8 (8): TS-84.
Published: 01 August 1959
... Cooled Brineil T&pera&e Fracture Rockwell Brinell Fracture Rockwell OF. Rating C Hardness Rating c 1900 7% 2; 444 5% 2000 8% 477 $ 2100 8% 51 495 $2 50 2150 514 20 ii 5 : 78 s 5 2 2250 7% 30 5 2: iii: 7% 5 2 Table 2 -RFFFCT OF TEMPERING TEWPRRATURE (Specimens 1 in round by 1 M in. long were hardened...
Journal Articles
Alloy Digest (1963) 12 (9): Fe-17.
Published: 01 September 1963
... of a magnetic fidd. If a sii e? tiy higher coercive fame is desired it may be obtain by temper- ing, but such treatment will somewhat Iowa the mag- netostrictive rope&a. This mahod, introduced m reduction o Las P magnets used in the vibration pick-ups. diminated many of the unpredictable variations in magnetC...
Journal Articles
Alloy Digest (1957) 6 (3): TS-56.
Published: 01 March 1957
... deg. F. After forging, Ohio Die should be buried in lime, mica or other insulating material for slow cooling. Specification Equivalents: AISI Type D2 M&lass II D-2 Lehigh H Superior 3 No. 610 Carpen= Columbia pd;yl5o Cromovan Jessop CNSl ii C. C. M. LUOii baie No. 2 Simonds 1 LJ~J~sal-cYclops General...
Journal Articles
Alloy Digest (1955) 4 (9): TS-38.
Published: 01 September 1955
... toughness and wear resistance. It c~onform~ to ASM &SS m-1, SAE Type 01 and ALSI Type 01. Composition: Carbon silicon ttliz%E T-gmn Iron PROPERTIES Table 1 - HARDNESS VWIJS TEMFERINGTEMFEU- (Oil quenched from 1470 F., tempered 1 hour at heat) Tempering~_Temperature Rockwe!pIardness 700 800 1E 1100 1200...
Journal Articles
Alloy Digest (1976) 25 (5): Ni-227.
Published: 01 May 1976
...- ing tool, Colmonoy No. 42SA Sprayweld powder is sprayed on the part to be hard surfaced as in ordinary metal spraying pro- cedure, and the overlay is then fused to the base m&lbyt&ch or furnace heat. This is ideal when deposits of uniform thickness are being applied over a large area. The process...
Journal Articles
Alloy Digest (1974) 23 (10): Ni-210.
Published: 01 October 1974
..., but require controlled slow cooling after fusion, in suitable Insulation such as SiI-OCel, mica, etc. Consult manufacturer for information on overlaying martensitic steel. *Registered trademark. Forms Available: These alloys are supplied m three forms: (1) Atomized powder for application with the Colmonoy...
Journal Articles
Alloy Digest (1975) 24 (12): Ni-222.
Published: 01 December 1975
...) Density, Ib/cu in. Specific gravity Melting point, OF Specific heat, But/lb/OF Thermal coef. expansion/OF 122-1202oF) 1 Thermal conductivity, Btu/ft /hr/m./oF Coefficient of friction (6 micro-inch surface finish) Magnetic permeability Modulus of elasticity, psi (Tension & Compression) PRDPERTI ES Table 1...
Journal Articles
Alloy Digest (1977) 26 (6): Ni-245.
Published: 01 June 1977
... No. 56 is supplied as bare rods (5/32,3/16. l/4,5/16, and 3/8-m diameter) to be applied by oxyacetylene or TIG (Heliarc) welding processes. It is supplied also as crushed powder for application with the Colmonoy Spraywelder or Fusewelder and plasma-spray transferred-arc process. Applications: Colmonoy...