SELECT B is a fully uniform air-hardening die steel having abrasion resistance intermediate between Olympic (AISI Type D2) high-carbon, high-chromium die steel and Badger (AISI Type O1) oil-hardening die steel. SELECT B has excellent non-deforming, deep-hardening characteristics and good toughness. Its machinability is comparable to most oil-hardening tool steels. Among its many uses are cold blanking and forming dies, rolls, punches, gages and broaches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-448. Producer or source: Latrobe Steel Company.

Select B FM is a high carbon-medium chromium fully uniform air hardening die steel. It possesses excellent non-deforming properties, is deep hardening and has the balance of toughness and wear resistance required for difficult applications. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: TS-108. Producer or source: Latrobe Steel Company.

Atlas Steels 3003 is a non-heat-treatable, aluminum-manganese-copper alloy. It is one of the most commonly used aluminum alloys. It is selected for applications where good formability, very good resistance to corrosion, or good weldability, or all three, are required, and where more strength is desired than is provided by unalloyed aluminum. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-477. Producer or source: Atlas Steels.

Atlas 2011 is a wrought, heat-treatable, aluminum-copper alloy (2xxx series) that also contains small amounts of bismuth and lead. Both bismuth and lead promote high-speed machining by causing the chips to fracture during machining and breaking away from the cutting tool. Atlas 2011 is used in applications where good machinability and high strength are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-472. Producer or source: Atlas Steels.

Atlas 5005 is a non-heat-treatable, aluminum-magnesium alloy. This alloy has been widely adopted for anodized architectural panels. With correct rolling practices and composition controls, Atlas 5005 architectural sheet provides exceptionally high-quality surfaces after anodizing. The architectural products produced from this alloy are used on many high-end building projects to meet customer specifications for uniformity and color match. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-482. Producer or source: Atlas Steels.

Atlas 5052 is a wrought, non-heat-treatable, Al-2.5Mg-0.25Cr alloy (5xxx series) that offers an attractive combination of moderate strength, good formability and weldability, and excellent corrosion resistance particularly in marine atmospheres. It is also very easy to anodize, providing a pleasant matte finish. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-470. Producer or source: Atlas Steels.

ATI CP Grade 7 Titanium is an unalloyed titanium grade that contains 0.12–0.25% Pd. This palladium-containing alloy extends the range of application of commercially pure (CP) titanium in HCl, H3PO4, and H2SO4 solutions. ATI CP Grade 7 Titanium is used in applications requiring excellent corrosion resistance in chemical processing or storage applications where the media is mildly reducing or fluctuates between oxidizing and reducing. It can be used in continuous service up to 425 °C (795 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, tensile properties and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-175. Producer or source: ATI.

VISCOUNT 20 is an air-hardening, 5% chromium hot-work steel with the same analysis as Latrobe's VDC except for the addition of carefully controlled and evenly dispersed alloy sulfides. These additives improve the machinability of the steel so that it is an excellent selection for a variety of hot-work applications where machinability is of primary importance. Its many uses include forging and heading dies, aluminum extrusion dies, mandrels and mold dies for plastics. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-446. Producer or source: Latrobe Steel Company.

VDM HT 80 is an austenitic, Ni-20Cr-1.25Si alloy that is typically used for the manufacture of resistors and heating conductors. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-772. Producer or source: VDM Metals GmbH.

Rio Tinto 355.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting, for the production of sand and permanent mold castings. It is a high-strength alloy with many desirable characteristics. The presence of copper in alloy 355.0 increases strength but reduces corrosion resistance and ductility. This alloy is less ductile than 356.0. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-486. Producer or source: Rio Tinto.

Rio Tinto 319.2 is a heat-treatable, Al-Si-Cu casting alloy (3xx.x series). It is available in the form of ingots for remelting, for the production of sand and permanent mold castings. Alloy 319.0 exhibits very good castability and pressure tightness, moderate strength, and good high-temperature properties. It offers good strength in the as-cast condition and is often used that way. However, it is possible to increase strength considerably by heat treatment. In applications that experience high temperatures, as in engine components, it is common to employ a T5, T7, or O treatment. These treatments tend to stabilize the casting and reduced dimensional changes in the component caused by high temperatures in service. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-474. Producer or source: Rio Tinto Limited.

Olin Brass Alloy C19020 is a copper-nickel-tin low-alloyed copper. It was developed as alloy NB-105 by Dowa Metaltech Company Limited, Japan, to meet increasing requirements of current carrying capacity, stiffness, formability and service temperature survivability being demanded by the automotive and electronic industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Cu-905. Producer or source: Olin Brass, GBC Metals, LLC.

ABEX PARABOLOY is a high-chromium cast iron produced under strictly controlled foundry conditions and heat treated to furnish two grades: PAB and PAC. PAB provides excellent wearlife in heavy-section castings for mill liners and selected crusher parts. PAC provides excellent service in applications requiring greater resistance to shock and impact. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: CI-49. Producer or source: Abex Corporation, Armsco Division.

Rio Tinto C355.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting, to be used for the production of sand and permanent mold castings. Alloy C355.0 is a higher purity, low iron version of alloy 355.0. Both the alloys are similar, except the lower iron in C355.0 provides better elongation and somewhat higher tensile strength. Alloy C355.0 is used in premium, high strength applications where castings are usually heat treated for maximum strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-490. Producer or source: Rio Tinto Limited.

ATI 6230 is a solid-solution strengthened, corrosion and heat-resistant, Ni-Cr-W-Mo-Al-La alloy. It is typically used for parts requiring good resistance to oxidizing environments up to 1150 °C (2100 °F) and relatively high strength up to 980 °C (1800 °F); however, usage is not limited to such applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-765. Producer or source: ATI.

CHLORIMET 2 is a nickel-base alloy that provides good resistance to corrosive conditions not normally handled by other types of commercially available alloys. CHLORIMET 2 is a refined equivalent of HASTELLOY B and is most commonly used in engineered equipment, such as pumps and valves, made by the alloy’s manufacturer. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-12. Producer or source: Duriron Company Inc. Originally published November 1954, revised October 1980, revised May 1996.

Rio Tinto 354.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting to be used for the production of sand and permanent mold castings. Alloy 354.0 was developed especially for premium engineered casting applications requiring high strength and elongation, and sound castings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting and heat treating. Filing Code: Al-479. Producer or source: Rio Tinto Limited.

Kaiser Aluminum Alloy 7050 has very high mechanical properties including tensile strength, high fracture toughness, and a high resistance to exfoliation and stress-corrosion cracking. The alloy is typically used in aircraft structural parts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: AL-366. Producer or source: Tennalum, A Division of Kaiser Aluminum.

Olin Brass Alloy C10200 is an oxygen-free, high-conductivity copper. It is ideal for applications where extremely high electrical conductivity and resistance to hydrogen embrittlement are vital. Where glass-to-metal seals are required this material also provides the added advantage of developing an adherent, nonscaling oxide at elevated temperatures. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance. Filing Code: Cu-903. Producer or source: Olin Brass GBC Metals, LLC.

AISI Type-A2 is a high-carbon, chromium, molybdenum tool and die steel having excellent non-deforming properties, abrasion resistance, toughness and good machinability. It is used for blanking and forming dies, rolls, punches, gauges, broaches, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: TS-168. Producer or source: Tool steel mills.