Search Results for SAE 1070

1070, C67S, CS70, and S70C are wrought high-carbon (carbon = 0.65–0.75%) non-alloy steels that are, in general, used in the cold worked, quenched and tempered, or austempered condition. These steels are widely used for highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-241. Producer or source: Data Survey.

SAE 1070 is a high-carbon water or oil-hardening tool and spring steel of low hardenability. It is used for railroad and street railway rails, heavy machinery parts, shafts, springs and a wide variety of hand and machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-121. Producer or source: Carbon steel mills.

AISI 1070 is a high-carbon water or oil-hardening tool and spring steel of low hardenability. It is used for railroad and street railway rails, heavy machinery parts, shafts, springs and a wide variety of hand and machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-51. Producer or source: Carbon steel mills.

Böhler K110 is a high-carbon, Cr-Mo-V, alloy cold-work tool steel that is suitable for medium-run tooling where abrasive wear is dominant and the risk of chipping or cracking is not high. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-805. Producer or source: voestalpine Böhler Edelstahl GmbH&Co KG.

SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

BRUSH chromium copper alloys are heat treatable, corrosion resistant alloys with both high electrical conductivity and strength. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and machining. Filing Code: Cu-579. Producer or source: Brush Wellman Inc..

APEX 39 is an aluminum die casting alloy ingot containing copper and silicon. It has excellent castability and improved machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting and machining. Filing Code: Al-75. Producer or source: Apex Smelting Company.

AA 6061 contains silicon and magnesium in approximate proportions to form magnesium silicide which is the precipitation hardening constituent. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-303. Producer or source: Various aluminum companies.

MALLEABLE IRON is a tough, malleable, shock-resisting cast iron. It has good corrosion resistance and excellent stability at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CI-23. Producer or source: Malleable iron foundries.

TYPE CC MEEHANITE is an all-round inexpensive general engineering material with a minimum of alloying elements, suitable for service under mildly corrosive conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CI-54. Producer or source: Meehanite Worldwide Corporation.

UHB RIGOR AR is a chromium-molybdenum-vanadium tool steel characterized by high surface hardness, high hardenability, high dimensional stability after hardening and tempering, high compression resistance, good machinability, good resistance to tempering and good wear resistance. Its many uses include metal-working tools, dies for porcelain and gages. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-315. Producer or source: Uddeholm Aktiebolag.

AISI 1144 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.24-0.33% sulfur to provide a free-machining steel. It is recommended especially for high-production automatic machine products. It has relatively low hardenability. Its ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses of AISI 1144 include mine-car axles and shafts, screws, propeller shafts, ball joints, bushings, bolts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-98. Producer or source: Carbon steel mills.

Virgo 15.5PH is a 15Cr-5Ni-3Cu-0.3Nb alloy that is precipitation hardening. It is martensitic and combines high mechanical properties with medium corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-929. Producer or source: Industeel USA, LLC.

Virgo 17.4 PH is a 17Cr-4Ni-3Cu-0.3% Cb alloy that is precipitation hardening. It is martensitic and combines high mechanical properties with corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1145. Producer or source: Industeel USA, LLC.

1050, 1053, C50, C50E, and C50R are wrought medium-carbon non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1050, 1053, C50E, and C50R may also be flame or induction hardened. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. Owing to their low hardenability, their use in the quench hardened and tempered condition is not recommended for large sizes, as the improvement in mechanical properties over the normalized condition is insufficient to justify the additional cost of heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-218. Producer or source: Data Survey.

1018 and C17 are wrought low-carbon non-alloy steels that are used in the as rolled, normalized, or cold worked condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-medium strength, good cold formability, and excellent weldability are required. They may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-227. Producer or source: Data Survey.

1010, C10E, and C10R are wrought low-carbon non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. These steels are widely used for lightly stressed parts that require excellent cold formability and excellent weldability. They are less expensive than 1008 / C8C and can be used when the requirements for cold forming are less exacting. C10, C10E, and C10R may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-224. Producer or source: Data Survey.

1015, C15E, and C15R are wrought low-carbon non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. These steels are widely used for lightly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low strength, excellent cold formability, and excellent weldability are required. They may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-225. Producer or source: Data Survey.

1016, C16E, and C16R are wrought low-carbon non-alloy steels that are used in the as rolled, normalized, or cold worked condition. These steels are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low strength, excellent cold formability, and excellent weldability are required. They may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-226. Producer or source: Data Survey.

1055, C55, C55E, and C55R are wrought medium-carbon non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1055, C55E, and C55R may also be flame or induction hardened. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-219. Producer or source: Data Survey.