Skip Nav Destination
Search Results for Pyromet X-750
1-9 of 9 Search Results for
Alloy Digest (1971) 20 (3): Ni-163.
Published: 01 March 1971
... PYROMET X-750 is a precipitation-hardenable nickel-base alloy that is highly resistant to chemical corrosion and oxidation and has excellent stress-rupture and creep properties at temperatures up to 1500 F after suitable heat treatment. This datasheet provides information on composition, physical...
Alloy Digest (1998) 47 (2): Ni-536.
Published: 01 February 1998
... similar to other iron-nickel base precipitation hardened alloys, such as Pyromet X-750. (See Alloy Digest Ni-163.) The ahoy can be machined in either the solution annealed or age hardened condition. Machine tools should have ample power, and cutting speeds should be slow. For better chip action on chip...
Alloy Digest (1977) 26 (12): Ni-252.
Published: 01 December 1977
...-normal sulfur-bearing fuels were used. Corrosion Tests (Sour Gas and Oil Well Applications): Com- parative laboratory tests have shown that Pyromet 3 1 is superior to Pyromet X-750 (an established alloy for downhole oil field equipment in deep sour weUs) with regard to sulfide stress cracking resistance...
Alloy Digest (1990) 39 (1): Fe-89.
Published: 01 January 1990
...) Modulus of elasticity, psi MPa Magnetic characteristics 0.299 8.28 4.5 x IO4 4.3 x 10 4.2 x 10 4.3 x IO-6 5.0 x 10a 23.2 x lo6 159.9 x 103 Ferromagnetic from below room temperature to approximately 750 F. Essentially nonmagnetic above 750 F. PROPERTIES Table 1 -TYPICAL ROOM AND ELEVATED TEMPERATURE...
Alloy Digest (1987) 36 (7): Fe-78.
Published: 01 July 1987
... ON WORLD WIDE METALS AND ALLOYS JULY 1887 @coPyright 1987. Alloy DIgat. Inc. All ngbu -ed. ISSN:OO2dl4X hblishcd by: Alloy wt. Inc 27Caddd Sweet &!a horn are rypical. nor to be used for Jpeclficarron or/inai dmgn Oran& New Jersey 07050 (201)677-9161 PYROMET+ 0-X-3 (Low-Expansion Iron-Base Superalloy...
Alloy Digest (1964) 13 (10): TS-152.
Published: 01 October 1964
... Pyromet 882 is an air-hardening 5% chromium tool steel recommended for high temperature applications up to 1000 F. It has extremely high tensile and creep strength. It is used for such critical applications as structural components in aircraft and missiles which require either extremely high...
Alloy Digest (1989) 38 (10): Ni-189.
Published: 01 October 1989
... PYROMET Alloy 80A, a high-temperature nickel-base alloy is characterized by its excellent creep resistance, high fatigue properties under very arduous conditions and high oxidation resistance. This datasheet provides information on composition, physical properties, and tensile properties as well...
Alloy Digest (1992) 41 (6): SS-530.
Published: 01 June 1992
... SANDVIK SANICRO 31HT is an austenitic iron-nickel-chromium alloy characterized by very good resistance to oxidation with good mechanical properties at elevated temperatures. It is recommended for resistance element sheathing, pyrometer tubes, airheaters, equipment for heat treating, furnace tubes...
Alloy Digest (1966) 15 (12): TS-187.
Published: 01 December 1966
...-3.50 0.15 max. Remainder Physical Constants: Density, lb/cu.iu. Thermal coef. expansion/OF x IO-6 (70-12OOoF) Thermal conductivity, Btu/ft2/in/br/oF Specific heat, Btu/lb/OF (70-212OF) Modulus of elasticity, psi I 106 PROPERTIES 0.28 8.0 468 0.11 29-30 EFFECT OF AGING ON HARDENED DIES (As air cooled 38...