PULSE thermoplastic resins are special alloys of acrylonitrile butadiene styrene (ABS) and polycarbonate PC). They are designed for applications requiring heat resistance while providing high- and low-temperature impact resistance. They withstand rapid repeated temperature fluctuations. They are readily molded. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. Filing Code: P-2. Producer or source: The Dow Chemical Company, Dow Plastics.

METGLAS Alloy 2605CO is an amorphous iron-base soft magnetic alloy. It has the highest saturation induction of any amorphous alloy commercially available, combined with very low core loss. It is the alloy of choice when low weight is as important as efficiency. It is particularly suited to 400 Hz aerospace applications where small core size is a requirement, and to pulse applications where maximum flux swing is desired. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-69. Producer or source: Allied Corporation, Metglass Products Department.

METGLAS Alloy 2605SC is an amorphous iron-base, general-purpose, soft magnetic alloy with properties superior to conventional crystalline electrical steels. It offers a unique combination of high resistivity, high saturation induction and extremely low core loss; these characteristics make it suitable for use from low frequencies to very high frequencies. Its applications include transformers and other devices requiring a square-loop high-saturation material. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-64. Producer or source: Allied Corporation, Metglass Products Department.

Sandvik Sanicro 59 is a corrosion resistant grade (CRA) available as wire, particularly weld wire. Sanicro 59 is used to weld most of the nickel alloys such as alloy 59, C-22, C-276, etc. It can also be used for joining nickel alloys with duplex stainless steels, super duplex stainless steels, and hyper duplex stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Ni-737. Producer or source: Sandvik Steel Company.

BLENDALLOY 25-5025 is a soft magnetic nickel/iron alloy. It is produced by power metallurgy techniques. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: Ni-402. Producer or source: Spang Specialty Metals.

Sandvik Sanicro 72HP is a corrosion- and oxidation-resistant grade (CRA) available as wire, particularly weld wire. Sanicro 72HP is commonly used as weld wire for joining NiCrFe alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Ni-739. Producer or source: Sandvik Steel Company.

INCONEL WELDING ELECTRODE 122 is a highly alloyed product used for joining Inconel alloy 622 (See Alloy Digest Ni-382, May 1990) and similar corrosion resistant grades. In dissimilar welding, it can be used to prevent preferential weld metal attack. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-407. Producer or source: Inco Alloys International Inc..

BLENDALLOY 25-5000 is a nickel-iron alloy with a rectangular hysteresis loop and low coercive force. It is a powder metallurgy product and this helps to provide it with uniform and consistent magnetic properties, exceptional purity and cleanliness, precise chemcial composition and guaranteed reproducibility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-188. Producer or source: Spang Industries Inc..

BLENDALLOY 25-7904 is an 80% nickel-15% iron-5% molybdenum alloy having very high permeability and low coercive force for magnetic cores in such applications as transformer laminations, sensitive magnetic amplifiers and magnetic shielding. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-181. Producer or source: Spang Industries Inc..

LDX 2101 is a low-alloyed duplex stainless designed as a general-purpose duplex stainless steel. Designed for excellent performance at lower cost. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1220. Producer or source: Outokumpu Stainless AB, Avesta Research Centre.

Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

Nicrofer 7520 is a high temperature creep resistant nickel-base alloy with good scaling resistance to 2000 deg F (1100 deg C). Many applications are in the aerospace industry. The alloy is sometimes called alloy 75. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-496. Producer or source: VDM Technologies Corporation.

Inco-Weld Filler Metal 686CPT is a welding product with higher (Cr + Mo + W) content than most other nickel-base welding products. This higher alloy content increases the resistance to pitting, crevice, and general corrosion. Applications include welding many CRA materials for corrosive service. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on joining. Filing Code: Ni-517. Producer or source: Inco Alloys International Inc.

CRYONIC 5 is a 5% nickel-0.50% manganese-0.25% molybdenum steel designed and specially heat treated for use in storage vessels at 275 F or lower. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-276. Producer or source: Armco International Sales.

Optim 960 QC (960 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-182. Producer or source: Rautaruukki Corporation.

Alloy C-22 is a nickel-chromium-molybdenum alloy that has outstanding resistance to pitting, crevice corrosion and stress-corrosion cracking. The alloy also has excellent resistance to both reducing and oxidizing media. The alloy has good mechanical properties at both room and elevated temperatures. It can be hot upset, forged, deep drawn, impact extruded and welded. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on joining. Filing Code: Ni-437. Producer or source: Haynes International Inc.

JNHF-Core is a chemical vapor deposition (CVD) processed, nonoriented, high-silicon soft magnetic steel sheet that has a silicon density gradient of between 3 to 6.5 wt.%. The silicon steel sheet consists of three gradated silicon density areas, a high-Si area, a low-Si area, and another high-Si area, which draws out excellent low core loss at high frequencies and has high saturation induction. This datasheet provides information on physical properties. Filing Code: FE-135. Producer or source: JFE Steel Corporation.

HIPERSIL is a high permeability silicon-iron alloy recommended for use in transformers. It has low hysteresis loss and preferred orientation. Its superior magnetic qualities exist only in the rolling direction. This datasheet provides information on composition, physical properties, and tensile properties. Filing Code: Fe-19. Producer or source: Westinghouse Electric Corporation.

INCONEL FILLER METAL 52 is a high chromium filler metal for gas-metal-arc and gas-tungsten-arc welding of Inconel Alloy 690 (See Alloy Digest Ni-266, March 1981). Higher chromium is beneficial in resisting stress-corrosion cracking in high purity water for pressurized water reactors and for resistance to oxidizing acids. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-412. Producer or source: Inco Alloys International Inc..

Metrode 20.70 Nb is a nickel-base consumable with a nominal composition of Ni, 20% Cr, and 2.5% Nb. This alloy is used to join a variety of oxidation-resistant nickel alloys. The product is a solid wire for tungsten inert gas (TIG), metal inert gas (MIG), and submerged arc welding (SAW). This datasheet provides information on tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: Ni-606. Producer or source: Metrode Products Ltd.