1-20 of 28 Search Results for

NITRO-100

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (2004) 53 (12): SA-541.
Published: 01 December 2004
... Nitro-100 has a modified chemistry of the AISI type 4045 with the addition of a hardened surface. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as surface...
Journal Articles
Alloy Digest (2018) 67 (1): SA-809.
Published: 01 January 2018
..., 10% hydrogen at 1120 °C in a belt furnace. Fig. 3 The effects of tempering sinter-hardened products. Compacted with 0.75% ethylene bis-stearamide (EBS) to 7.0 g/cm3. Tempered at 180 °C. Sintered under 90% nitro- gen, 10% hydrogen at 1120 °C in a belt furnace. Acceler- ated cooling rates produce high...
Journal Articles
Alloy Digest (1998) 47 (2): SS-707.
Published: 01 February 1998
..., nitro- gen, and oxygen contents. This process provides steel with the optimum combination of cleanliness, refined structure, strength, and isotropic properties, which makes it the ideal material for high performance dies and molds. Finkl42OM Premium Quality exhibits improved toughness over AISI 420...
Journal Articles
Alloy Digest (1963) 12 (5): Al-125.
Published: 01 May 1963
..., and drilling, the soluble cutting oils are satisfactory. For turning operations use a mixture of kerosene and lard oil in equal parts. Castability: This alloy has good castability. Casting temper- ature range is 1250-14500F. The melting range is 1250-15000F. For remelting for casting, use nitro- gen...
Journal Articles
Alloy Digest (1967) 16 (5): Al-166.
Published: 01 May 1967
... are satisfactory. For turning operations use a mixture of kerosene and lard oil in equal parts. Castability: This alloy has good castability. Casting temper- ature range is 1250-14500F. The melting range is 1250-15000F. For remelting for casting, use nitro- gen or chlorine gaseous flux or solid aluminum chloride...
Journal Articles
Alloy Digest (1993) 42 (11): SS-555.
Published: 01 November 1993
... ZZR Carbide Grade T25M H.S. Steel Point angle 118 chisel angle 120° H.S. Steel straight flute hand taps Flood Flood RGCOL RTD Metal Working Compound/ Liquid ,. . . . . . . 1, . . . . . . . . . . . onunended shielding gas composition is Argon + 2% Nitro- gen. This gas formulation tends to enhance...
Journal Articles
Alloy Digest (1998) 47 (1): SS-701.
Published: 01 January 1998
... and crevice corrosion resistance in oxidizing acid and neutral chloride solutions. These corrosion resistant proper- ties are provided by the high chromium, molybdenum and nitro- gen contents of the alloy. The high nickel and molybdenum con- tents provide excellent resistance to chloride stress corrosion...
Journal Articles
Alloy Digest (1994) 43 (3): Hf-1.
Published: 01 March 1994
... oxide at approximately 4OOC; with nitro- gen to form nitrides at approximately 9OOC; and rapidly with hydrogen. -L I* about 700C to form hydrides. The ox- Atomic Number Atomic Weight Density, kg/m3 (lbs./cubic inch) Modulus of Elasticity, Pa. at 294K ( 70°F) at 533K (5oooF) at 644K (700°F) Magnetic...
Journal Articles
Alloy Digest (1993) 42 (12): SS-558.
Published: 01 December 1993
.... the precipitation free duplex smcture contains about 40% ferrite and 60% austenite. The ferritic/austenitic structure is main- tained at higher temperatures. also, due to the addition of nitro- gen, a strong austenite stabilizing element, as well as to the precipitation-free condition (See figure 1). The presence...
Journal Articles
Alloy Digest (1992) 41 (4): Ni-401.
Published: 01 April 1992
... (particularly molybdenum and chro- mium) in the weld pool. Recommended welding param- eters are given in Tables 2 and 3. Corrosion Resistance: INCO alloy 25-6M0 is a fully austenitic alloy offering excellent resistance to pitting and crevice corrosion, a contribution of its high chromium, molybdenum and nitro...
Journal Articles
Alloy Digest (2006) 55 (1): SS-950.
Published: 01 January 2006
... is used for chromium-nickel austenitic stainless steels. DOI: 10.31399/asm.ad.ss0950 Pickling. A nitro hydrofluoric acid bath (10 20% HNO3, 1.5 5% HF) at 20 60 °C (68 140 °F) is used for the picking treatment. A 10 20% H2SO4, 1.5 5% HF pickling bath may also be used. Passivation-decontamination treatments...
Journal Articles
Alloy Digest (2007) 56 (11): SS-1002.
Published: 01 November 2007
... -320 160 Minimum 20 68 150 Typical 20 68 225 DOI: 10.31399/asm.ad.ss1002 s The cold hardening of the steel may require more powerful equipment than used on structural steel. Pickling. A nitro-hydrofluoric acid bath (10 20% HNO3, 1.5 5% HF) at 20 60 °C (68 140 °F) is used for the picking treatment. A 0...
Journal Articles
Alloy Digest (2015) 64 (5): SS-1208.
Published: 01 May 2015
... molybdenum content and cold hardening behavior of the steel explains that it may require more powerful equipment than 304 stainless steel. Pickling. The Urea modified grade must be used in the as-pickled and passivated conditions. Pickling treatment may be performed with a nitro-hydrofluoric acid bath (10...
Journal Articles
Alloy Digest (2004) 53 (1): Ni-619.
Published: 01 January 2004
... alternating current can be used to help reduce excessive oxidation. Successful weldments have been fabricated with Inconel alloy 603XL using Inconel Filler Metal 617. This material is generally joined without filler metal (autogenous) using the GTAW or the plasma arc welding (PAW) processes. Addition of nitro...
Journal Articles
Alloy Digest (1995) 44 (8): SS-607.
Published: 01 August 1995
... successfully used in joining this stainless. Corrosion Resistance: Chloride Pitting: The resistance of ALdXN stainless to pit- ting and crevice corrosion in chlorides is excellent. The nitro- gen addition improves resistance to chloride pitting and crev- ice corrosion even beyond that of AL-6X** stainless...
Journal Articles
Alloy Digest (1999) 48 (2): TS-567.
Published: 01 February 1999
... a surface hardness of approximately 1250 HV1. Two hours of nitro- carburizing at 570 °C (1060 °F) gives a surface hardness of approximately 950 HV1 with a case depth of 10 20 µm (0.0004 0.0008 in Weldability: Good results when welding tool steel can be achieved if proper precau- tions are taken during...
Journal Articles
Alloy Digest (2005) 54 (7): Ti-136.
Published: 01 July 2005
.... Figure 2, the TTT diagram for Ti-12Mo is given for reference. Note as a special precaution that Allvac Ti-15Mo alloy can be subject to hydrogen contamination during improper pickling, and to oxygen, nitro- gen, and carbon pickup during forging, heat treating, and grinding. This contamination may cause...
Journal Articles
Alloy Digest (2001) 50 (7): SS-465.
Published: 01 July 2001
... the full range of cold-working operations typically ap- plied to the common austenitic stainless steels. It can be used in heading, drawing, bending, and upsetting. Because of its nitro- gen content, 317LMN will be slightly faster than 316L. Machinability: 317LMN is a very tough austenitic stainless steel...
Journal Articles
Alloy Digest (2000) 49 (9): SS-802.
Published: 01 September 2000
... when cooling down. Too fast a cooling rate may reduce this to retransformation process and explain why welding consumables are overalloyed in nickel. With respect to the high-temperature stability of the duplex structure, it is important to realize there is a gamma-stabilizing action by the nitro...
Journal Articles
Alloy Digest (1993) 42 (4): SS-542.
Published: 01 April 1993
... contain increased levels of molybdemun and nitrogen. respectively. The combination of molybdenum and nitrogen is particularly effective in enhancing resistance to pitting and crev- ice corrosion. especially in process slreams containing acids. clorides and sulfur compounds at elevated temperature-s. Nitro...