1-20 of 63 Search Results for


Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1975) 24 (2): Ni-215.
Published: 01 February 1975
... Nickel-Copper Alloys 505 and 506 are strong castings alloys. Both alloys combine high strength with good wear resistance. Alloy 505 (4% silicon) is employed where exceptional resistance to galling is needed. Alloy 506 (3% silicon) is recommended where good (but not exceptional) galling resistance...
Journal Articles
Alloy Digest (1962) 11 (8): Ni-73.
Published: 01 August 1962
... MONEL alloy 506 is an intermediate cast nickel-copper alloy that has higher hardness than cast Monel alloy 410 and better machinability than Monel alloy 505. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture...
Journal Articles
Alloy Digest (1963) 12 (8): Ni-85.
Published: 01 August 1963
... resistance, Nickel Copper Alloy 505 or Nickel Copper Alloy 506 should be used in irs place. It does not become brittle at subzero temperatures. AC such temperatures the tensile strength and hardness will increase co a limited degree, while rhe ductility and impact strength may decrease an insignificant...
Journal Articles
Alloy Digest (1995) 44 (8): Co-98.
Published: 01 August 1995
... of galvanic corrosion than the nickel-base alloys. they can be safely used with pump seals containing copper-base alloys. Available Forms: Wallex No. 55 is a Sprayweld powder. for application with the Colmonoy Spraywelder or other thermal spraying delivery sys- tem. Users of the Colmonoy Fusewelder torch...
Journal Articles
Alloy Digest (1986) 35 (1): Cu-505.
Published: 01 January 1986
... formerly limited to heat treatable tempers. *BRUSHFORM is a registered trademark of Brush Wellman Inc. Composition: Beryllium Cobalt+Nickel Cobalt+Nickel+Iron Trace elements Copper 1.8-2.0 0.20 min. 0.60 max. 0.50 max. Remainder Physical Constants: Density, lb/cu in. 0.302 Specific gravity 8.35 Thermal...
Journal Articles
Alloy Digest (2020) 69 (2): Cu-905.
Published: 01 February 2020
... Olin Brass Alloy C19020 is a copper-nickel-tin low-alloyed copper. It was developed as alloy NB-105 by Dowa Metaltech Company Limited, Japan, to meet increasing requirements of current carrying capacity, stiffness, formability and service temperature survivability being demanded by the automotive...
Journal Articles
Alloy Digest (1993) 42 (11): Cu-592.
Published: 01 November 1993
... COPPER ALLOY NO. C76200 is a nickel silver alloy with good fabricability, forming and brazeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming...
Journal Articles
Alloy Digest (2019) 68 (11): Cu-900.
Published: 01 November 2019
... Concast C95500 is a cast nickel-aluminum bronze alloy. Aluminum bronze is the highest strength standard copper-based alloy. The nickel content in C95500 greatly enhances its mechanical strength, and wear and corrosion resistance, making it suitable for heavyduty applications. This datasheet...
Journal Articles
Alloy Digest (2004) 53 (8): Cu-722.
Published: 01 August 2004
... ductility microstructure tensile properties UNS C95510 Chemical Composition, wt Aluminum 9.7 10.9 Nickel 4.5 5.5 Iron 2.0 3.5 Manganese 1.5 max Zinc 0.3 max Tin 0.2 max Copper 78.0 min Mechanical Properties: See Table 1. Specification Equivalents: UNS C95510 General Characteristics: BrushBronze 95510...
Journal Articles
Alloy Digest (1984) 33 (5): Cu-477.
Published: 01 May 1984
... and resistance to corrosion. Among its many uses are bearings, pump impellers, piston rings and valve parts that are subject to liquid and /or gas pressure and, therefore, must be sound (free from defects). Composition: Copper Tin Lead Zinc Nickel Antimony Nominal Range 88 86-O-89.0 10 9.0- 11.0 2 1.0-25 - 0.7...
Journal Articles
Alloy Digest (1978) 27 (6): Cu-355.
Published: 01 June 1978
... with varying degrees of severity if moisture is present in these gases. Specification Equivalents: ASTM: B 30, B 271, B 505, B 584 (formerly B 143). SAE: J 461 and J 462. Military: MIL-C-15345, Alloy 10. Federal: QQ-C-390. Ingot No. 230. General Characteristics: Copper Alloy No. 923 is nominally an 87% copper...
Journal Articles
Alloy Digest (1977) 26 (12): Cu-345.
Published: 01 December 1977
... alloy. It has a good combination of strength and corrosion resistance and is often used in castings subject to liquid or gas pressures. Among its many uses are valves, pumps, bushings and gears. Composition: Physical Constants: (Approximate) Copper Tin zinc Nickel Lead Iron Antimony Sulfur Phosphorus...
Journal Articles
Alloy Digest (1979) 28 (2): Cu-367.
Published: 01 February 1979
... pressures quite successfully. Its numerous applications include valves, gears and bushings. *BUNTING is a registered trademark of NL Industries, Inc. Composition: NOXlliIld Range Copper* 87 85.0-89-O Tin 8 759.0 Lead 1 0.30-I .o zinc 4 2.5-5.0 Nickel* - 1 .O max. Iron - 0.25 max. Antimony - 0.25 max. Sulfur...
Journal Articles
Alloy Digest (1980) 29 (12): Cu-408.
Published: 01 December 1980
... AMPCOLOY 521 is a cast copper-nickel alloy with excellent resistance to many highly active corrosives, particularly saline waters and sulfuric and phosphoric acids. It has high strength and good ductility and can be welded readily. Its many applications include valves, pump bodies, steam fittings...
Journal Articles
Alloy Digest (2004) 53 (11): Cu-727.
Published: 01 November 2004
... or source: Olin Brass. Producer or Source: Olin Brass Copyright ┬ę ASM International┬« 2004 2004 ASM International chemical composition elasticity Olin alloy C19020 physical properties tensile properties thermal properties UNS C19020 Chemical Composition, wt Tin 0.30 0.9 Nickel 0.50 3.0...
Journal Articles
Alloy Digest (1978) 27 (8): Cu-359.
Published: 01 August 1978
... Copper Alloy No. 955 is a copper-aluminum-iron-nickel alloy with high strength and hardness, good resistance to fatigue and wear, and excellent resistance to corrosion. It is suited for service up to 750 F. Typical applications are marine hardware, gears and pickling equipment. This datasheet...
Journal Articles
Alloy Digest (1982) 31 (12): Cu-450.
Published: 01 December 1982
.... It has good casting characteristics, good machinability, moderate strength and ductility and good corrosion resistance. Among its many uses are ornamental fixtures, general hardware, plumbing goods, small gears and pipe fittings. Composition:+ Copper Tin Lead Zinc Nickel Iron Antimony Sulfur Phosphorus...
Journal Articles
Alloy Digest (1984) 33 (4): Cu-475.
Published: 01 April 1984
.... Composition: Nominal Range * Copper Tin Lead Zinc Phosphorus** Nickel Antimony 79 76.5-79.5 6 5.0-7.0 15 14.0- 18.0 - 1.5 max. - 1.5 max. - 0.8 max. - 0.50 max. Physical Constants: Density, lb/cu in. (At 68 F) Specific gravity Melting range,* F Specific heat, Btu/lb/OF (At 68 F) Thermal coef. expansion / F...
Journal Articles
Alloy Digest (1982) 31 (2): Cu-432.
Published: 01 February 1982
... that are subjected to liquid or gas pressures, such as those in valves, pumps, etc. It also is used for bearings and gears. Physical Constants: (Approximate) Composition:* Nominal Rwie Copper 88 86.0-89.0 Tin 10 9.0-l 1 .o ZillC 2 1 .o-3 .o Nickel - 1 .O max. Lead - 0.30 max. Antimony - 0.20 max. Iron - 0.20 max...
Journal Articles
Alloy Digest (1989) 38 (9): Ni-374.
Published: 01 September 1989
... Allegheny Ludlum AL 400 is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is not hardenable by heat treatment. It can be appreciably strengthened by cold work. This datasheet provides information on composition, physical properties, elasticity...