Nickel-Copper Alloys 410 and 411 are strong and ductile casting alloys; they are generally used in conjunction with wrought counterparts. They can be cast readily into fittings such as elbows, tees, return bends, flanges and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-214. Producer or source: Nickel alloy casting producers.

Nickel Copper Cast Alloy 410 is one of the most useful cast materials to withstand corrosives encountered in industry. It has tensile strength comparable to cast carbon steel and gives good performance under conditions of abrasion and erosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-85. Producer or source: High alloy foundries.

MONEL alloy 506 is an intermediate cast nickel-copper alloy that has higher hardness than cast Monel alloy 410 and better machinability than Monel alloy 505. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-73. Producer or source: Huntington Alloy Products Division.

Copper Alloy No. 973 is a cast leaded nickel brass containing 12% nickel; it is and has been known commercially as 12% Leaded Nickel Silver. It has a pleasing whiteness and high resistance to corrosion. Among its many uses are ornamental and decorative applications and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-322. Producer or source: Copper alloy foundries.

Alloy KHP 102 (UNS C19010) is a high performance copper alloy with additions for strength while maintaining high conductivity. KHP 102 belongs to the group of CuNiSi alloys and is particularly suitable for use in electrical and electronic products. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: Cu-856. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

Wieland-K76 (C19010) is copper alloyed with low nickel for good fabricability for parts in the electrical industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-839. Producer or source: Wieland Metals Inc..

Wieland-K73 (UNS C19005) is copper alloyed with low nickel for good fabricability for parts in the electrical industry. This datasheet provides information on composition, physical properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Cu-901. Producer or source: Wieland Metals, Inc..

CMW 3 is an age-hardenable copper-base alloy combining high mechanical and electrical properties. The alloy is typically used for spot and seam welding cold and hot-rolled steels and coated materials, current carrying shafts and arms, back-up bars, back-up bars for arc welding, electrical current carrying structural parts, and springs. The alloy is available in both the cast and wrought forms. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-85. Producer or source: CMW Inc. Originally published as Mallory 3, January 1960, revised August 2000.

Kanthal 200 R 110 is a thermostatic bimetal and is recommended for use in the temperature range −20 to 250 deg C. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: MN-5. Producer or source: Kanthal AB.

MoldMAX V is a high conductivity, moderately high strength, copper-nickel-silicon-chromium alloy. The alloy has a unique combination of thermal conductivity and strength. The MoldMAX copper mold alloys provide short cycle times, plastic part dimensional control, parting line maintenance, and good corrosion resistance This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, machining, joining, and surface treatment. Filing Code: Cu-822. Producer or source: Materion Brush Performance Alloys.

Hidurel 6 is a copper alloy with some chromium. It has high strength with high conductivity. The alloy has superior conductivity to Hidurel 5 (Alloy Digest Cu-607, July 1996) and is used for electrical applications where strength and brazing ability are major requirements. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming and machining. Filing Code: CU-746. Producer or source: Langley Alloys.

Hidurel 640 is a copper alloy with similar properties to Hidurel 6 (see Alloy Digest Cu-746, September 2006) with superior mechanical properties at high temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming and machining. Filing Code: CU-747. Producer or source: Langley Alloys.

BrushForm 158 is a spinodal alloy that develops exceptionally high elastic strength levels, dimensional stability, and relaxation resistance at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. and bend strength. It also includes information on forming. Filing Code: Cu-832. Producer or source: Materion Brush Performance Alloys.

NIAL is a nickel-base negative thermoelement for Type K thermocouples. This datasheet provides information on composition and physical properties. It also includes information on high temperature performance. Filing Code: Ni-751. Producer or source: Carpenter Technology Corporation.

Konstantan is an electrical resistance alloy with a very low temperature coefficient of electrical resistivity. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: CU-791. Producer or source: ThyssenKrupp VDM GmbH.

Paliney H3C is a palladium, copper and silver based alloy designed for applications such as semiconductor test probes where extreme hardness and higher levels of electrical conductivity are required. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: Pd-2. Producer or source: Deringer Ney.

Metrode Nimrod AKS and AB, and Nimax A are nickel-base consumables similar to 182, but with lower manganese and with a molybdenum addition. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: Ni-603. Producer or source: Metrode Products Ltd.

Ancorsteel 1000 is the workhorse of the Ancorsteel series. It has low levels of carbon and oxygen and good compressibility. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles that are then annealed to produce uniform, dependable steel powders. This datasheet provides information on composition, physical properties, and compressive strength. It also includes information on powder metal forms. Filing Code: CS-152. Producer or source: Hoeganaes Corporation.

MANGANIN is an alloy of copper, manganese and nickel recommended for resistors in precision built electrical apparatus and for shunts for D.C. ammeters. This datasheet provides information on composition and physical properties. Filing Code: Cu-126. Producer or source: Driver-Harris Company.

NILO Alloy 42 is a binary nickel-iron alloy having a low and nominally constant expansion coefficient over the range 20-300 C (68-572 F). It is used for semiconductor lead frames, thermostats and glass-to-metal seals. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Fe-77. Producer or source: Inco Alloys International Inc..