Skip Nav Destination
Search Results for NI-ROD 44 Welding Electrode
1-20 of 34 Search Results for
NI-ROD 44 Welding Electrode
Alloy Digest (1996) 45 (9): Fe-112.
Published: 01 September 1996
... NI-Rod 44 Welding Electrode is a product specifically designed to attain 100% joint efficiency in the common grades of ductile iron while maintaining both strength and ductility through a metallurgically unique nickel-iron-manganese system. This datasheet provides information on composition...
Alloy Digest (1998) 47 (3): Ni-538.
Published: 01 March 1998
... desirable features of NI-ROD 55 Welding Electrode with the speed and economy of automatic or semiautomatic welding. Submerged-arc welding with the cored wire is done with INCOFLUX 5 submerged arc flux. This datasheet provides information on composition, hardness, and tensile properties. It also includes...
Alloy Digest (1996) 45 (4): Ni-507.
Published: 01 April 1996
... required, NI-Rod Filler Metal 44 or NI-Rod FC 55 Cored Wire will provide similar good machinability. NI-Rod Fiier Metal 99 does not deposit graphite, and welds with low dilution may be gummy and more diflicult to machine. Producer: INCO ALLOYS INTERNATIONAL. INC. Welding Rroducts Company Newton, NC 28658...
Alloy Digest (1971) 20 (12): SA-270.
Published: 01 December 1971
... and MO, was chosen to give a rather flat tempering response curve so that a pronounced secondary hardening peak was avoided, and in turn a temper embrittlement region (loss of impact properties) was also avoided. Forms Available: Sheet. plate, bars, rods, billets, and welding wire. Plate can be...
Alloy Digest (1977) 26 (6): Ni-245.
Published: 01 June 1977
...) PROPERTIES Table 1 - ROOM AND ELEVATED-TEMPERATURE HARDNESS (Hardness measurements made on gas-weld-rod deposits of Colmonoy No. 56) Test temperature, oF 70 600 800 1000 1200 Rockwell C hardness* 53 50 48 44 41 *These hardnesses also apply to Sprayweld and Fuseweld deposits. TIC and plasma-spray transferred...
Alloy Digest (1977) 26 (9): Ni-249.
Published: 01 September 1977
..., Forgings. ASTM B 333-77, Sheet, Plate and Strip. ASTM B 335-77. Rod. ASTM B 619-77, Welded Pipe. ASTM B 622-77, Seamless Ripe and Tube. AWS A5.1476 (ERNiMo-7) Bate Welding Rods and Electrodes. ASME SFA5.14 (ERNlMo-7) Bare Welding Rodsand Electrodes. General Characteristics: HASTELLOY alloy B-2 is a nickel...
Alloy Digest (2010) 59 (3): SS-1056.
Published: 01 March 2010
... the alloys. Alloy 25-6HN is a new addition to the Special Metals existing line of high-performance, superaustenitic stainless steels, Incoloy alloys 25-6MO and 27-7MO. Products Forms Available: Plate, sheet, strip, rod, bar, wire, forgings, billet, welded pipe and tube, flanges, and fittings...
Alloy Digest (2010) 59 (1): Ni-639.
Published: 01 January 2010
.... The creep resistance of alloy 230 is optimized by control of the boron content. Available Product Forms: Rod, plate, pipe and tube, ttings, forgings, and welding wire Applications: The combination of high-temperature strength and resistance to creep, stress rupture, and corrosion make the alloy...
Alloy Digest (2016) 65 (6): Ni-725.
Published: 01 June 2016
... following filler materials are recommended by the producer. Rods electrodes: VDM FM 617 B (W.-Nr.2.4627) DIN EN ISO 18274: S Ni 6617 (NiCr22Co12Mo9) UNS N06617 AWS A5.14: ERNiCrCoMo-1 Corrosion Resistance: VDM Alloy 617 B shows an excellent high-temperature corrosion resistance to oxidation and...
Alloy Digest (2003) 52 (11): Ni-617.
Published: 01 November 2003
... conventional welding processes and prod- ucts. Attachment or dissimilar weldment may be deposited using INCONEL Filler Metal 82 or 52 or Inconel Welding Electrodes 182 or 15, or INCO-WELD A welding electrode. INCONEL® ALLOY 693 Filing Code: Ni-617 Nickel November 2003 INCONEL® ALLOY 693 (High-Temperature...
Alloy Digest (2003) 52 (8): Ni-611.
Published: 01 August 2003
... England +44-1432 382200 +44-1432 264030 (fax) ISSN: 002-614X Ni-611B Fig. 1 Stress rupture data for Incoloy alloy 890 (cold-pilgered and solution-annealed tubing; hot-rolled and solution-annealed plate) Fig. 2 Larson-Miller plot showing relative creep rupture properties of as- produced Incoloy alloys 803...
Alloy Digest (2009) 58 (3): Ni-667.
Published: 01 March 2009
... strength Yield strength, 0.2% offset MPa ksi MPa ksi Elongation, % Typical range 807 841 117 122 380 427 55 62 44 48 AMS 5878A 793 min 115 min 345 min 50 min 40 min DATA ON WORLDWIDE METALS AND ALLOYS Filing Code: Ni-667 Nickel March 2009 Copyright © 2009, ASM International®. All rights reserved. Data...
Alloy Digest (1982) 31 (10): Ni-280.
Published: 01 October 1982
... generally without postheating. Forms Available: Rod, bar, sheet, strip, plate, wire, tube, pipe and forgings. Weldability: Applications: Nicrofer 3620 Cb can be welded by the manual metal arc welding (MMA) process or by the gas-shielded arc welding procedure. Oxyacetylene welding is not recommended...
Alloy Digest (2006) 55 (2): Ni-630.
Published: 01 February 2006
.... # $ Nicrofer 7016TiAl is available as rod, bar, billet, forgings, discs and rings, strip, wire, and welding filler metals. $ Due to its high-temperature strength up to 820 °C (1510 °F) and its excellent corrosion resistance, Nicrofer 7016TiAl finds a wide range of applications. Combustion engine exhaust...
Alloy Digest (2009) 58 (11): Ni-675.
Published: 01 November 2009
... electric arc furnace and refined in an AOD. Electrodes are subsequently remelted by electroslag remelting (ESR) and and/or vacuum arc remelting (VAR). Product Forms Available: Toolware 718 is available in a variety of sizes and forms, including consumable electrode remelted ingot, billet, bar, and coil rod...
Alloy Digest (1980) 29 (5): Ni-263.
Published: 01 May 1980
...) By covered electrodes normally applied using direct current with reverse polarity, (2) By manual oxyace- tylene welding with bare rods, (3) By the manual gas-tungsten arc process using bare rods, and (4) By using powder in the plasma weld surfacing (PTA) process. *Registered trademark. Forms...
Alloy Digest (2003) 52 (1): SS-871.
Published: 01 January 2003
... alloys 625, 622, and C-276. Alloy 27-7MO products typically contain 27% Ni, 22% Cr, 7.2% Mo, and 0.34% N. The nickel and nitrogen content pro- duces a stable austenitic structure. By virtue of its content of molybdenum, chromium, and nitrogen, the alloy offers excellent resistance to pitting and crevice...
Alloy Digest (1958) 7 (11): SA-77.
Published: 01 November 1958
.... is desirable. For most structures it is recommended that subsequent hear treat- ment be used even though preheating has been employed. Use welding rod of the same composition. In metal-arc welding use a coated elecuode of the shielded-arc type. When welding with bare type electrodes, the welding...
Alloy Digest (1989) 38 (3): Ni-369.
Published: 01 March 1989
... performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-369. Producer or source: Nickel-base alloy producers. Producer or Source: Nickel-base alloy producers Copyright © ASM International® 1996 1996 ASM International chemical composition corrosion-resistant alloys...
Alloy Digest (1998) 47 (4): SS-712.
Published: 01 April 1998
... relatively large amounts of deformation oc- cur between anneals. Weldability: AL 800 can be joined by gas tungsten arc welding (GTAW). gas consumable electrode, or stick electrode welding techniques commonly used on stainless steels. A number of welding rods and wires are. commercially available for joining...