1-12 of 12 Search Results for

MONEL FILLER METAL 60

Sort by
Journal Articles
Alloy Digest (1985) 34 (9): Ni-321.
Published: 01 September 1985
... MONEL Filler Metal 60 is a nickel-base alloy used for gas-tungsten-arc, gas-metal-arc and submerged-arc welding of MONEL. alloys 400, 400, R-405 and K-500. It also is used for surfacing of steel. The weld metal deposited by Filler Metal 60 has properties similar to those of MONEL. alloy 400...
Journal Articles
Alloy Digest (1984) 33 (10): Ni-304.
Published: 01 October 1984
... not hot work below I 700° F but reheat as often as necessary. Joining: Nicloy 400 can be welded, soldered or brazed without difficulty. When welding Nicloy 400, MONEL* Filler Metal 40 or an equivalent should be used with oxyacetylene, Monel Filler Metal 60 with gas-shielded arc practice, and Monel Welding...
Journal Articles
Alloy Digest (1985) 34 (4): Ni-312.
Published: 01 April 1985
... below the specified minimum working temperature, it must be reheated. Joining: Nicorros 400 can be welded or brazed without difficulty. MONEL* Filler Metal 40 or an equivalent should be used for oxyacetylene welding. Monel Filler Metal 60 (AWS A5. I4 Class ERNiCu-7) is used for gas-shielded arc practice...
Journal Articles
Alloy Digest (1963) 12 (2): Ni-79.
Published: 01 February 1963
... alloy R-405 can be joined by the usual welding, brazing, and soldering processes common to industry. Process Recommended Joining Material Metal Arc Mooel Welding Electrode 180 Inert Gas Metal Arc Monel Filler Metal 60 Oxy-Acetylene MoneI Filler Metal 40 Silver Bra&g Any silver containing alloy...
Journal Articles
Alloy Digest (1966) 15 (1): Ni-110.
Published: 01 January 1966
... or carbon and low alloy steel is performed with MONEL Filler Metal 60 and INCOFLLJ?i* 5 Sub- merged Arc Flux. Electric seam welding is adaptable for joining chin gauge sheet. Corrosion Resistance: MONEL alloy 402 is resistant co hot dilute acid pickling solutions chat are employed in the pickling of steel...
Journal Articles
Alloy Digest (1955) 4 (4): Ni-18.
Published: 01 April 1955
... of the filler rod must be kept in the protecting atmosphere of the flame to avoid oxidizing the rod. Use No. 44 K-Monel Gas Welding wire with a paste flux. In metallic arc welding use K-Monel No. 134 rod. For inert gas-metal arc welding, use 64 K Monel rod and filler wire. Corrosion Resistance...
Journal Articles
Alloy Digest (1969) 18 (6): Cu-200.
Published: 01 June 1969
...-sheets of feedwater heaters by the same methods used for the installation of nickel-copper alloy and other cupro-nickel tubes. In order to develop as much of the tube strength as possible, Monel filler metal is required. Into No. 140 fluxcoated electrodes may be used for manual metal-arc welding...
Journal Articles
Alloy Digest (1963) 12 (9): Cu-133.
Published: 01 September 1963
... brazed and soldered. Cupro Nickel, 30%707 tubes can be welded into steel cube-sheers of feedwacer heaters by the same methods used for the installation of nickel-copper alloy and ocher cupro-nickel cubes. In order to develop as much of the tube strength as possible, Monel filler metal is required. Iaco...
Journal Articles
Alloy Digest (1993) 42 (8): Ni-440.
Published: 01 August 1993
... HASTELLOY alloy C-276 is a solid solution, nickel-molybdenum-chromium alloy, with outstanding resistance to localized corrosion and to both oxidizing and reducing media. (See Alloy Digest Ni-164, May 1971, for base metal.) This datasheet provides information on composition, physical properties...
Journal Articles
Alloy Digest (2021) 70 (3): Ni-768.
Published: 01 March 2021
.... Inco-Weld filler metal and welding electrode 686CPT can be used to overmatch 30 200 Inconel C-276 where enhanced corrosion resistance is Yield Strength required. 20 (0.2% Offset) 100 10 0 Comparable Grades 0 200 400 600 800 1000 1200 1400 1600 Temperature, °F Special Metals Corporation ASTM Fig. 1...
Journal Articles
Alloy Digest (1975) 24 (5): Cu-297.
Published: 01 May 1975
... weldability has been demonstrated in both plate and sheet form. No degradation of corrosion properties has been observed during sea water exposures of autogenous, automatic TIC and manual covered electrode welded joints. MONEL* Filler Metal 67 (70/30 Cu:Ni) is recommended to assure galvanic compatability...
Journal Articles
Alloy Digest (1991) 40 (11): Co-82.
Published: 01 November 1991
... ON WORLD WIDE METALS AND ALLOYS PcWshad by: Alloy Digest IIIC. I2Ol-S77-9161 27 Canliild Slreel. Ofivlge. N.J. 07C60! U.S.A. CARPENTER MP35N8 ALLOY (Ultra-High Strength Alloy) CARPENTER MP35TW alloy is a nickel/cobalt/chromium/molybdenum alloy with ultra-high saength, good ductility and toughness...