Skip Nav Destination
Search Results for LOW RESISTANCE 60 ALLOYS
1-20 of 1770 Search Results for
LOW RESISTANCE 60 ALLOYS
Alloy Digest (1989) 38 (5): Cu-546.
Published: 01 May 1989
... Low resistance alloys are used for applications where low to moderate electrical resistivity is required, as in various lead wires, for example. The numbers 30, 60, 90 and 180 designate the specific resistivities (ohm/cir mil ft) of the respective alloys of this family. This datasheet provides...
Alloy Digest (1977) 26 (8): Cu-339.
Published: 01 August 1977
... DRIVER 60 ALLOY is a copper-nickel alloy for use where fairly low electrical resistance is required. The number designation corresponds to its specific resistivity (60 ohms/cir mil/ft) which is combined with a fairly high temperature coefficient of resistance. Its maximum recommended operating...
Alloy Digest (1961) 10 (10): SS-122.
Published: 01 October 1961
.... The low thermal conductivity of the alloy makes it most important to have the cutting fluid flood both the tool and the work. Sulfa-chlorinated petroleum oil containing active sulphur and about 8 to 10 per cent fatty oil is recommended for high speed steel tools. Water-soluble cutting fluids are...
Alloy Digest (2006) 55 (12): Ni-644.
Published: 01 December 2006
... operating conditions. Its high iron content and relatively low level of nickel make it particularly resistant to internal oxidation in atmospheres that alternate between oxidizing and reducing or carburizing. The alloy has a high temperature coefficient of resistance. It is used for heating elements in...
Alloy Digest (1977) 26 (2): Ni-240.
Published: 01 February 1977
... International chemical composition compressive strength corrosion-resistant alloys creep properties elasticity electrical applications fatigue properties fracture toughness hardness heat treatability high-temperature alloys joinability low-temperature alloys machinability NIMAG 60 oxidation...
Alloy Digest (1990) 39 (7): SS-308.
Published: 01 July 1990
...-temperature alloys impact resistance joinability low-temperature alloys machinability oxidation resistance physical properties tensile properties workability UNS S21800 ARMCO NITRONIC 60 DATA ON WORLD WIDE METALS AND ALLOYS ed. Filing Code: SS-308 Stainless Steel REVISED JULY 1990 MARCH 1975...
Alloy Digest (1975) 24 (2): Ni-215.
Published: 01 February 1975
... Alloy 505 (As Cast or Age-Hardened)t4) 15-25 15-25 lo-20 8-12 50-100 Nickel-Copper Alloy 506 2540 25-35 40-60 10-20 90-180 *Operating speeds for rough cuts should be on the low side of the indicated speed range. Speeds for light finishing cuts should be near the high side of the range. Speeds cited for...
Alloy Digest (2009) 58 (2): SS-1029.
Published: 01 February 2009
... of any other stainless steel. It resists wear, tearing, or freeze up of both the primary and contact materials over a wide range of service temperatures. The elevated- temperature wear resistance of Nitronic 60 is excellent despite its relatively low hardness when compared with cobalt and nickel-base...
Alloy Digest (2008) 57 (9): SA-584.
Published: 01 September 2008
... CarElso 60/65 HIC is a steel alloy with special melt practice producing a pressure vessel material with excellent resistance to hydrogen-induced cracking (HIC). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on...
Alloy Digest (1977) 26 (11): Cu-343.
Published: 01 November 1977
... DRIVER 90 ALLOY is a copper-nickel alloy for use where only moderately low electrical resistance is required. The number designations refers to its specific resistivity (90 ohms/cir mil/ft) which is combined with a moderate coefficient of resistance. Its maximum recommended operating temperature...
Alloy Digest (1982) 31 (8): Ni-278.
Published: 01 August 1982
... carbon content (0.10% max.) of MBF-60/6OA minim&s carbide precipitation thus increasing corrosion resistance in the bra& joint. The excellent flow characteristics and low joint erosion of this alloy recommend its selection as filler metal for large production runs of low-to-medium stressed assemblies...
Alloy Digest (1988) 37 (8): Fe-84.
Published: 01 August 1988
..., M-3, M-4, M-6 r;;i Fe - 84 AUGUST 1988 -DIGEST - DATA ON WORLD WIDE METALS AND ALLOYS p&l, +Y ybtpzp lwwmd. PutJhhdlJy: Aky cligd, k I m-977-9191 a-rlLwe-. 27 OmkM Stmt. Orange. N.J. 07050 I USA ARMCO* ORIENTED ELECTRICAL STEELS / M-2, M-3, M-4, M-6 (Low core loss, high permeability Iron-silicon...
Alloy Digest (1998) 47 (6): SS-721.
Published: 01 June 1998
... Electralloy Nitronic 60 is an alloy with excellent uniform corrosion resistance, outstanding galling resistance, high strength, and good high-temperature oxidation resistance. The alloy retains toughness at low temperature. This datasheet provides information on composition, physical properties...
Alloy Digest (1985) 34 (9): Ni-321.
Published: 01 September 1985
... penetration may be less than half that obtained in mild steel. The manufacturer can supply detailed information on these three basic differences. Ask for a copy of the publication Huntington Alloys: Joining. Additional Differences: In comparison with welding of low-alloy steels, several welding requirements...
Alloy Digest (1986) 35 (8): SA-421.
Published: 01 August 1986
... BethStar 60 steel plate is a high-strength product with a 60,000 psi minimum yield strength. It contains low carbon and low sulfur and has outstanding toughness, weldability and formability. It provides the design engineer with a an economical high-strength low-alloy (HSLA) grade that can be...
Alloy Digest (2001) 50 (2): W-23.
Published: 01 February 2001
... ELKONITE G13, G14, 1060, 3042 and 3150 tungsten carbide-silver alloys have good erosion resistance and low contact resistance. The major characteristics are superior resistance to contact welding or sticking and excellent corrosion resistance. Tungsten carbide is a hard, chemically inert material...
Alloy Digest (1996) 45 (8): Cu-608.
Published: 01 August 1996
... recommended for component joining, and it is neces- sary to specify the low oxygen (LOX) grades of GlidCop to prevent the development of porosity in the microstructure. Specification Equivalents: UNS Cl5760 General Characteristics: GlidCop AL-60 is made by the internal oxidation technique. The patented...
Alloy Digest (1971) 20 (7): CS-42.
Published: 01 July 1971
... BETHLEHEM RQC-60 is a heat-treated carbon steel having up to 60,000 psi yield strength in combination with good notch toughness and excellent weldability. It is engineered specifically for pressure vessels, storage tanks, and structures where low-temperature service is required. This datasheet...
Alloy Digest (1982) 31 (4): TS-397.
Published: 01 April 1982
... CARPENTER HI SHOCK 60 is an air-hardening steel for tools and dies that require extreme shock resistance. Its benefits, in addition to exceptional toughness, include good machinability and a low hardening temperature. Recommended applications include hobs, heavy-duty punches, mandrels and other...
Alloy Digest (1973) 22 (7): Zn-16.
Published: 01 July 1973
... KORLOY 2570 and 2573 are zinc-base alloys possessing superior strength and good low-temperature impact properties down to -60 F. They are easily forged, extruded and machined for wrought applications and alloy 2570 can be used in the cast condition. They have excellent bearing properties and can...