THERMOLD J is the basic 5% chromium hot-work steel, modified by the addition of 1.5% nickel and higher carbon content. The nickel addition is intended to increase the toughness to compensate for the higher carbon. The exceptional properties of Thermold J have led to wide usage in both hot and cold-work applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-330. Producer or source: Cyclops Corporation.

RED CUT SUPERIOR J is a tungsten-type of hot-work tool and die steel; in fact, it is the 18 tungsten-4 chromium-1 vanadium high-speed composition with carbon lowered to provide more toughness. It is characterized by high red hardness and good resistance to abrasion. It is recommended for applichations in which hardness must be maintained at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-410. Producer or source: Teledyne Vasco.

J and L VAN-80 is a hot-rolled, controlled-cooled high-strength, low-alloy steel developed for uses where high strength in combination with excellent toughness, cold formability, weldability and fatigue resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-256. Producer or source: Jones & Laughlin Steel Corporation.

J and L TYPE 304-N is a nitrogen-bearing, high strength stainless steel which is stronger than Type 304 but retains the other characteristics of the latter. It has many applications in the aerospace, industrial, and instrument fields. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-244. Producer or source: Jones & Laughlin Steel Corporation.

STELLITE STAR J-METAL PM (UNS R30102) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, joining, and powder metal forms. Filing Code: CO-93. Producer or source: Deloro Stellite Inc.

HAYNES STELLITE Star J-Metal is a cobalt-base alloy recommended for handling extreme conditions of wear, abrasion and heat. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-31. Producer or source: Haynes Stellite Company.

G-E Alloy J-1500 is a nickel-base alloy specifically designed for high strength and oxidation resistance in the 1000 to 1600 F. temperature range. It responds to a precipitation hardening thermal treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Ni-45. Producer or source: General Electric Company. Originally published October 1958, revised June 1963.

Ferro-Tic J is a cemented carbide bonded with a modified high-speed steel. It is machinable and heat treatable. It is recommended for cutting tools. This datasheet provides information on composition and physical properties. It also includes information on heat treating, machining, and joining. Filing Code: TS-145. Producer or source: Chromalloy American Corporation, Sintercast Division.

J and L Type 446 MOD-1 stainless steel is a high-chromium ferritic stainless steel with molybdenum and titanium. The titanium is for weld stabilization. A titanium plus niobium stabilized grade (MOD-2) is also available. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, and joining. Filing Code: SS-739. Producer or source: J & L Specialty Steel Inc.

J and L type 444 stainless steel is a fully ferritic stainless steel with extra low carbon and nitrogen contents. The alloy is resistant to stress-corrosion cracking and also has corrosion properties comparable to AISI type 316, along with high yield strength, good weldability, and good formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-742. Producer or source: J & L Specialty Steel Inc.

J and L Types 409 HP are ferritic stainless steels with 11% chromium. They exhibit an excellent combination of good formability, economy, and resistance to oxidation and corrosion. It is typically used in automotive exhaust systems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-743. Producer or source: J & L Specialty Steel Inc.

J and L type 405 has marginal stainless corrosion resistance. It is used primarily as a structural material. It is serviceable in continuous service up to 704 C (1300 F) and in intermittent exposures up to 816 degrees Celsius (1500 degrees Fahrenheit). It does not harden appreciably when air cooled from high temperatures where some austenite can exist. It is used in structural parts that are not annealed after welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-749. Producer or source: J & L Specialty Steel Inc.

J and L type 201 stainless steel is an austenitic alloy with approximately 6.5% manganese. The nickel and chromium contents are lower than typical to allow more work hardening and to obtain high tensile strengths with excellent ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-768. Producer or source: J & L Specialty Steel Inc.

J and L type 201LN is an austenitic chromium-nickel-manganese stainless steel with a lower carbon content and with added nitrogen compared to J and L type 201 (see Alloy Digest SS-768, November 1999). Type 201LN work hardens to high tensile strengths while maintaining good toughness, even to cryogenic temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-771. Producer or source: J & L Specialty Steel Inc.

Type 301 (UNS S30100) is an austenitic chromium-nickel stainless steel capable of attaining high tensile strength and ductility by cold working. It is not hardenable by heat treatment. Type 301 is essentially nonmagnetic in the annealed condition and becomes magnetic with cold deformation. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-775. Producer or source: J & L Specialty Steel Inc.

J and L 2205 is a ferritic-austenitic duplex stainless steel. It resists stress-corrosion cracking very well and has good pitting and general corrosion resistance. Its high strength and stress-corrosion resisting characteristics are a reflection of its duplex microstructure. Its uses include pipe, tubing, tanks, and heat exchangers for the chemical industries. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-773. Producer or source: J & L Specialty Steel Inc.

Type 302 (UNS S 30200) stainless steel is an austenitic chromium-nickel stainless steel, nonhardenable by thermal treatments. It may be cold worked to high tensile strengths with slightly lower ductility than type 301. Its corrosion resistance is superior to that of type 301. Type 302 is essentially nonmagnetic in the annealed condition and becomes slightly magnetic when cold worked. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-779. Producer or source: J & L Specialty Steel Inc.

BOHNALITE J is a high-copper aluminum alloy suitable for permanent mold and sand casting. It responds to heat treatment to produce high mechanical properties. It retains its strength well and has other excellent properties at elevated temperatures. Its bearing properties are also good. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Al-12. Producer or source: Bohn Aluminum & Brass Corporation.

G.E. ALLOY J-1570 is a cobalt-base alloy having good forgeability and superior fatigue strength at 1500 deg. F. It is an age-hardening alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Co-11. Producer or source: Metallurgical Products Department, GE.

G-E ALLOY J-1300 is a precipitation hardening iron-base alloy with an excellent strength to weight ratio. It is recommended for applications in the 1350 F. range. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-83. Producer or source: General Electric Company.