Type 309 (UNS S30900) is an austenitic chromium-nickel stainless steel widely used for elevated-temperature services. It has a good combination of oxidation resistance and corrosion-resisting properties. The alloy is essentially nonmagnetic when annealed and become slightly magnetic when cold worked. It is intended primarily for high-temperature applications at 816 deg C (1500 deg F) or higher where resistance to oxidation and/or corrosion is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-896. Producer or source: J & L Specialty Steel Inc.

Type 347 (UNS S34700) and type 348 (UNS S34800) are austenitic chromium-nickel stainless steels containing columbium and tantalum. These grades are recommended where it is preferred to omit the annealing operation after welding. They are also recommended for service at temperatures between 425 and 900 deg C (800 and 1650 deg F). Type 348 is used in applications that require a restricted tantalum content such as those encountered in radioactive service. These types are essentially non-magnetic when annealed and become slightly magnetic when cold worked. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-898. Producer or source: J & L Specialty Steel Inc.

Type 316L (UNS S31603) is an austenitic chromium-nickel stainless and heat-resisting steel with superior corrosion resistance to other chromium-nickel steels when exposed to many types of chemical corrodents, as well as marine atmospheres. Carbide precipitation as a result of welding in this low carbon version will be minimized, resulting in less susceptibility to intergranular corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-900. Producer or source: J & L Specialty Steel Inc.

Type 441 is a fully ferritic stainless steel with extra-low carbon and nitrogen contents. The alloy is resistant to stress-corrosion cracking and also has corrosion properties comparable to AISI type 316. Type 441 has a high yield strength, good weldability, and good formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-901. Producer or source: J & L Specialty Steel Inc.

J and L Type 446 MOD-1 stainless steel is a high-chromium ferritic stainless steel with molybdenum and titanium. The titanium is for weld stabilization. A titanium plus niobium stabilized grade (MOD-2) is also available. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, and joining. Filing Code: SS-739. Producer or source: J & L Specialty Steel Inc.

J and L type 444 stainless steel is a fully ferritic stainless steel with extra low carbon and nitrogen contents. The alloy is resistant to stress-corrosion cracking and also has corrosion properties comparable to AISI type 316, along with high yield strength, good weldability, and good formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-742. Producer or source: J & L Specialty Steel Inc.

J and L Types 409 HP are ferritic stainless steels with 11% chromium. They exhibit an excellent combination of good formability, economy, and resistance to oxidation and corrosion. It is typically used in automotive exhaust systems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-743. Producer or source: J & L Specialty Steel Inc.

J and L type 405 has marginal stainless corrosion resistance. It is used primarily as a structural material. It is serviceable in continuous service up to 704 C (1300 F) and in intermittent exposures up to 816 degrees Celsius (1500 degrees Fahrenheit). It does not harden appreciably when air cooled from high temperatures where some austenite can exist. It is used in structural parts that are not annealed after welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-749. Producer or source: J & L Specialty Steel Inc.

J and L type 201 stainless steel is an austenitic alloy with approximately 6.5% manganese. The nickel and chromium contents are lower than typical to allow more work hardening and to obtain high tensile strengths with excellent ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-768. Producer or source: J & L Specialty Steel Inc.

J and L type 201LN is an austenitic chromium-nickel-manganese stainless steel with a lower carbon content and with added nitrogen compared to J and L type 201 (see Alloy Digest SS-768, November 1999). Type 201LN work hardens to high tensile strengths while maintaining good toughness, even to cryogenic temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-771. Producer or source: J & L Specialty Steel Inc.

J and L Type 409NI is a ferritic stainless steel with 11% Cr. It exhibits an excellent combination of good formability, economy, and resistance to oxidation and corrosion. It is typically used in automotive exhaust systems or where more forming is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-902. Producer or source: J & L Specialty Steel Inc.

J and L VAN-80 is a hot-rolled, controlled-cooled high-strength, low-alloy steel developed for uses where high strength in combination with excellent toughness, cold formability, weldability and fatigue resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-256. Producer or source: Jones & Laughlin Steel Corporation.

J and L TYPE 304-N is a nitrogen-bearing, high strength stainless steel which is stronger than Type 304 but retains the other characteristics of the latter. It has many applications in the aerospace, industrial, and instrument fields. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-244. Producer or source: Jones & Laughlin Steel Corporation.

BOHNALITE J is a high-copper aluminum alloy suitable for permanent mold and sand casting. It responds to heat treatment to produce high mechanical properties. It retains its strength well and has other excellent properties at elevated temperatures. Its bearing properties are also good. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Al-12. Producer or source: Bohn Aluminum & Brass Corporation.

HAYNES STELLITE Star J-Metal is a cobalt-base alloy recommended for handling extreme conditions of wear, abrasion and heat. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-31. Producer or source: Haynes Stellite Company.

G-E Alloy J-1500 is a nickel-base alloy specifically designed for high strength and oxidation resistance in the 1000 to 1600 F. temperature range. It responds to a precipitation hardening thermal treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Ni-45. Producer or source: General Electric Company. Originally published October 1958, revised June 1963.

Ovako 100Cr6 comprises a group of through-hardening bearing steels with modification to improve machining, cold forming, and cleanliness for better fatigue strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, forming, and heat treating. Filing Code: SA-582. Producer or source: Ovako North America Inc.

G.E. ALLOY J-1570 is a cobalt-base alloy having good forgeability and superior fatigue strength at 1500 deg. F. It is an age-hardening alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Co-11. Producer or source: Metallurgical Products Department, GE.

G-E ALLOY J-1300 is a precipitation hardening iron-base alloy with an excellent strength to weight ratio. It is recommended for applications in the 1350 F. range. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-83. Producer or source: General Electric Company.

Ferro-Tic J is a cemented carbide bonded with a modified high-speed steel. It is machinable and heat treatable. It is recommended for cutting tools. This datasheet provides information on composition and physical properties. It also includes information on heat treating, machining, and joining. Filing Code: TS-145. Producer or source: Chromalloy American Corporation, Sintercast Division.