1-20 of 350 Search Results for

ISO-elastic

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1957) 6 (8): Fe-14.
Published: 01 August 1957
... ISO-ELASTIC is an iron-nickel alloy having low temperature coefficient of the modulus of elasticity. It is suitable for precision instrument springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information...
Journal Articles
Alloy Digest (2021) 70 (3): CI-79.
Published: 01 March 2021
... International® 2021 2021 ASM International ISO 185/JL/275 chemical composition physical properties elasticity tensile properties bend strength fatigue properties castability heat treatability thermal properties ISO 185/JL/275 (Gray Cast Iron) Filing Code: CI-79 Cast Iron :: March 2021...
Journal Articles
Alloy Digest (1967) 16 (5): SA-210.
Published: 01 May 1967
... ISO-CAST 9A is cast nickel-chromium-vanadium steel recommended as a structural alloy of high strength and impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating...
Journal Articles
Alloy Digest (1963) 12 (6): SA-147.
Published: 01 June 1963
... ISO-CAST 5 is a cast manganese-molybdenum steel of medium strength for general purposes. It is recommended for automobile and tractor parts, structural and machinery castings, gears, housings, etc. This datasheet provides information on composition, physical properties, hardness, elasticity...
Journal Articles
Alloy Digest (1968) 17 (10): SA-232.
Published: 01 October 1968
... ASM International® 1996 1996 ASM International aircraft parts castability chemical composition elasticity gears hammermill equipment hardness heat treatability ISO-CAST 8 joinability machinability machine tools physical properties railroad car parts shafts tensile properties...
Journal Articles
Alloy Digest (2017) 66 (6): Ni-730.
Published: 01 June 2017
... the alloying of Cr- Ni and Mo. DOI: 10.31399/asm.ad.ni0730 Specification Equivalents: Proprietary SMC276 Series TGP-0799 (latest revision) API 5CT / ISO 11960 NACE MR0175 / ISO 15156 API RP 5C1 / ISO 10405 API 5CRA / ISO 13680 UNS N06276 General Characteristics: SMC276 is an austenitic nickel base material...
Journal Articles
Alloy Digest (2015) 64 (2): TS-729.
Published: 01 February 2015
..., m/min (ft/min) Boehlerit LC 225 C / ISO HC-P25 110 150 (361 492) 150 200 (492 656) 190 300 (623 984) Boehlerit LC 235 C / ISO HC-P53 90 130 (295 427) 130 180 (427 591) 170 280 (558 919) Milling Feed, mm/tooth (in./tooth) 0.5 0.36 (0.02 0.014) 0.35 0.16 (0.014 0.006) 0.15 0.08 (0.006 0.003) Cutting...
Journal Articles
Alloy Digest (2014) 63 (9): SA-707.
Published: 01 September 2014
...: SA-707. Producer or source: Böhler Edelstahl GmbH & Company KG. Producer or Source: Böhler Edelstahl GmbH & Company KG Copyright © ASM International® 2014 2014 ASM International BOEHLER V354 BOEHLER V354 ISO EXTRA chemical composition elasticity fracture toughness heat...
Journal Articles
Alloy Digest (2015) 64 (5): CS-188.
Published: 01 May 2015
... application of this ISO C110 material in terms of sour service is left up to the end user judgment through the following statement ISO 11960 (2011 revision) paragraph 7.14.1. General Guidance. The purchaser should refer to ISO 15156-2 or ANSI-NACE MR0175/ISO 15156-2 for guidance on the usage of grades C90...
Journal Articles
Alloy Digest (2016) 65 (9): TS-736.
Published: 01 September 2016
... (in./rev) ISO grade Turning with carbide tools (condition: age hardened to 38 42 HRC; average values) 0.5 1.0 (0.02 0.04) 0.1 0.3 (0.004 0.012) HC-K10, HC-P15, HC-P25 1 4 (0.04 0.16) 0.2 0.4 (0.008 0.016) HC-K10, HC-P25, HC-M35 4 8 (0.16 0.32) 0.3 0.6 (0.012 0.024) HW-P30, HC-M35 Over 8 (0.32) 0.5 1.5...
Journal Articles
Alloy Digest (2021) 70 (6): SA-872.
Published: 01 June 2021
...; A = percentage elongation after fracture (Gauge length = 5.65 So); Z = percentage reduction of area; KV2 = absorbed energy for a Charpy V-notch test piece using a 2 mm striker. (a) For information only. Source: EN ISO 683-2:2018. Table 3 Modulus of elasticity and rigidity Property Unit At Value Modulus...
Journal Articles
Alloy Digest (2021) 70 (8): SA-874.
Published: 01 August 2021
..., KV2 = absorbed energy for a Charpy V-notch test piece using a 2 mm striker. (a) For information only. Source: 25CrMo4 (1.7218), Lucefin S.p.A., 2018, and EN ISO 683-2:2018 Table 3 Modulus of elasticity and rigidity Property Unit At Value Modulus of elasticity GPa (106 psi) 20 °C (68 °F) 212 (30.8...
Journal Articles
Alloy Digest (2021) 70 (11): SA-877.
Published: 01 November 2021
... = percentage reduction of area, KV2 = absorbed energy for a Charpy V-notch test piece using a 2 mm striker. (a) For information only. Source: 50CrMo4 (1.7228), Lucefin S.p.A., 2018, and EN ISO 683-2:2018 Table 3 Modulus of elasticity and rigidity Property Unit At Value Modulus of elasticity GPa (106 psi) 20 °C...
Journal Articles
Alloy Digest (2021) 70 (1): TS-808.
Published: 01 January 2021
...) 20 °C 0.12 (68 °F) (72.2) 20 °C 8.33 (68 °F) (14.4) Source: Lucefin S.p.A. (a) For information only. Source: EN ISO 4957:2018. (b) Typical value. (c) Source: EN ISO 683-1:2018 Mechanical Properties Table 2 Modulus of elasticity and rigidity See Tables 1 and 2. Hot Forming Property Unit At Value...
Journal Articles
Alloy Digest (2017) 66 (1): SS-1256.
Published: 01 January 2017
... (7.4) 250 (482) 7930 (0.285) 3.88 × 10 6 (4.18 × 10 5) 34.3 (8.2) 13.3 (7.7) 432 (0.103) 13.6 (7.6) DOI: 10.31399/asm.ad.ss1256 Specification Equivalents: Proprietary SM2535 Series TGP-2020 (latest revision) API 5C /ISO 11960 NACE MR0175/ISO 15156 API RP 5C1/ISO 10405 API 5CRA/ISO 13680 General...
Journal Articles
Alloy Digest (2017) 66 (3): SS-1259.
Published: 01 March 2017
... stability and protect the bulk material from corrosion attack up to a defined temperature threshold in wet combined CO2 and H2S environment. This is achieved through alloying of Cr-Ni and Mo. Specification Equivalents: Proprietary SM2242 series. TGP-0797 (latest revision) API 5CT/ISO11960 NACE MR0175/ISO...
Journal Articles
Alloy Digest (2006) 55 (11): Ni-642.
Published: 01 November 2006
.... Table 2 Minimum Mechanical Properties at Room Temperature Impact toughness, ISO-V, min(a) Yield strength, 0.2%, min Yield strength, 1%, min Tensile strength Elongation, min, % Longitudinal Transverse Product Size, mm MPa ksi MPa ksi MPa ksi Longitudinal Transverse J ft . lbf J ft . lbf Bar 90 280 41...
Journal Articles
Alloy Digest (1972) 21 (8): SS-278.
Published: 01 August 1972
... Filing Code: ss-278 EMPIRE NO-40 Steinless Steel AUGUST 1972 - DATA ON WORLD WIDE METALS AND ALLOYS Pdlisbed by Engineering Alloys Digcn Inc. Upper Monakir, New Jew EMPIRE ISO-40* (High-Strength Cast Stainless Steel with Excellent Corrosion Resistance) EMPIRE IS040 is a precipitation-hardenable stainless...
Journal Articles
Alloy Digest (2021) 70 (2): Co-133.
Published: 01 February 2021
.../10.31399/asm.ad.co0133 Copyright © 2021, ASM International®. All rights reserved. Information on heat treatment sourced from ATI 35N, ATI; CarTech MP35N, Carpenter Technology Corporation; ANSI/ NACE MR0175/ISO 15156-3:2015; and ASTM F562:2013. Fig. 1 Typical strength after 4h aging treatment, showing...
Journal Articles
Alloy Digest (2020) 69 (1): TS-784.
Published: 01 January 2020
... hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. Chemical Composition Element Composition, wt% Carbon 0.42 0.50 Silicon 0.15 0.40 Manganese 0.60 0.80 Phosphorus 0.030 max Sulfur 0.030 max Iron bal Source: Lucefin Group and EN ISO...