Search Results for ISO-cast 5

ISO-CAST 5 is a cast manganese-molybdenum steel of medium strength for general purposes. It is recommended for automobile and tractor parts, structural and machinery castings, gears, housings, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and joining. Filing Code: SA-147. Producer or source: Empire Steel Castings Inc..

ISO 185/JL/275 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 275–375 MPa (40–54 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/275 contains lower carbon and silicon contents, while still maintaining good thermal conductivity and damping capacity. Owing to its higher tensile strength and hardness, it exhibits superior wear properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-79. Producer or source: International Organization for Standardization.

ISO 185/JL/300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix; it has a tensile strength of 300–400 MPa (44–58 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-82. Producer or source: International Organization for Standardization.

ISO 185/JL/250 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 250–350 MPa (36–51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/250 contains lower carbon and silicon contents and has superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-76. Producer or source: ISO Central Secretariat.

ISO 185/JL/225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 225–325 MPa (33-47 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on heat treating. Filing Code: CI-73. Producer or source: International Organization for Standardization (ISO).

ISO 185/JL/200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, 185/JL/200 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-70. Producer or source: International Organization for Standardization.

ISO-CAST 8 is a cast chromium-molybdenum steel recommended as a general purpose structural alloy of wide application with wide range of mechanical properties. It is used for aircraft and railroad car parts, machine tool and hammermill equipment, gears and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: SA-232. Producer or source: Empire Steel Castings Inc..

ISO 185/JL/350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a tensile strength of 350–450 MPa (51–65 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides a combination of high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on wear resistance as well as casting and heat treating. Filing Code: CI-85. Producer or source: International Organization for Standardization.

ISO-CAST 9A is cast nickel-chromium-vanadium steel recommended as a structural alloy of high strength and impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: SA-210. Producer or source: Empire Steel Castings Inc..

ISO 185/JL/150 is an unalloyed low-tensile-strength gray cast iron that has high carbon and silicon contents, and thus the highest thermal conductivity and damping capacity. It is, therefore, useful in situations where high thermal conductivity, damping capacity, and machinability are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties. This datasheet provides information on composition, physical properties, tensile properties, shear and bend strength as well as fatigue. It also includes information on casting, heat treating, and machining. Filing Code: CI-67. Producer or source: International Organization for Standardization.

EMPIRE IS0-40 is a precipitation-hardenable stainless steel for castings resistant to corrosion, stress-corrosion cracking and erosion-corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-278. Producer or source: Empire Steel Castings Inc..

JSA FC300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. The tensile strength of JSA FC300 approaches the maximum tensile strength attainable in gray cast iron. It provides a combination of high strength while still maintaining good thermal conductivity. Applications, therefore, tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-97. Producer or source: Japanese Standards Association (JSA).

ISO1083/JS/350-22-RT is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, when measured on test pieces machined from separately cast samples. It is specifically designed for applications where tensile strength is less important than impact and elongation properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-103. Producer or source: International Organization for Standardization.

ISO1083/JS/400-15 is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-105. Producer or source: International Organization for Standardization.

EMPIRE ISO-450 is a cast stainless steel with excellent corrosion resistance. A simple, single-step aging treatment develops high strength with good ductility and toughness. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-273. Producer or source: Empire Steel Castings Inc..

ISO1083/JS/400-18-LT is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%, when measured on test pieces machined from separately cast samples. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-104. Producer or source: International Organization for Standardization.

Rio Tinto 319.2 is a heat-treatable, Al-Si-Cu casting alloy (3xx.x series). It is available in the form of ingots for remelting, for the production of sand and permanent mold castings. Alloy 319.0 exhibits very good castability and pressure tightness, moderate strength, and good high-temperature properties. It offers good strength in the as-cast condition and is often used that way. However, it is possible to increase strength considerably by heat treatment. In applications that experience high temperatures, as in engine components, it is common to employ a T5, T7, or O treatment. These treatments tend to stabilize the casting and reduced dimensional changes in the component caused by high temperatures in service. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-474. Producer or source: Rio Tinto Limited.

JSA FC350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 350 MPa (51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: CI-92. Producer or source: Japanese Standards Association (JSA).

Raffmetal EN AB-Al Si2MgTi is a heat-treatable, Al-Si-Mg-Mn-Ti casting alloy casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring a combination of good strength and shock resistance, good corrosion resistance, and suitability for decorative anodizing and welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-467. Producer or Source: Raffmetal S.p.A.

Raffmetal EN AB-Al Cu4MgTi is a heat-treatable, aluminum-copper-magnesium-titanium casting alloy in ingot form for remelting. It is used for producing sand, permanent mold, and investment castings for applications requiring high strength at temperatures up to 200 °C (390 °F). This alloy’s outstanding mechanical properties makes it a serious alternative to steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, machining, and joining. Filing Code: Al-462. Producer or source: Raffmetal S.p.A.