1-12 of 12 Search Results for

INDALLOY 4

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1978) 27 (7): In-1.
Published: 01 July 1978
... INDALLOY No. 4 is the metallic element indium. It is a very versatile, malleable and soft metal; it is softer even than lead. Indium remains malleable at temperatures approaching absolute zero; therefore, it is an excellent for a variety of applications including gaskets and seals. It is a useful...
Journal Articles
Alloy Digest (1981) 30 (2): Bi-22.
Published: 01 February 1981
... vigorously before pouring, DO NOT SKIM, (3) Use a thermometer to check pouring temperature which should be 350oF, (4) Preheat parts surrounding cavity into which Indalloy 217.440 is to be poured, (5) Make certain that cavity is completely filled by puddling the alloy with a fine wire before it solidifies...
Journal Articles
Alloy Digest (1981) 30 (9): Bi-26.
Published: 01 September 1981
... INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses...
Journal Articles
Alloy Digest (1981) 30 (5): Bi-24.
Published: 01 May 1981
... a gas burner or other heat source, (2) Stir Indalloy 136 vigorously be- fore pouring, DO NOT SKIM, (3) Use a thermometer to check pouring temperature which should be about lSO-2120F after melting in a double boiler, (4) Preheat parts surrounding cavity into which Indalloy 136 is to be poured, (5) Make...
Journal Articles
Alloy Digest (1982) 31 (1): Bi-27.
Published: 01 January 1982
... should be about 212OF after melting in a double boiler (a temperature as high as 300┬░F can be used but is not recommended), (3) Reheat parts surround- ing cavity into which Indalloy 158 is to be poured, (4) Make certain that the cavity is completely fried. Bending of Tubes and Other Forms: Indalloy 158...
Journal Articles
Alloy Digest (1980) 29 (7): Bi-18.
Published: 01 July 1980
... parts surrounding cavity into which lndalloy No. 255 is to be poured, (4) Make certain that cavity is filled completely by puddling the alloy with a fine wire before it solidifies, and (5) Allow up to 10 to 15 hours age hardening (depending on application) before placing in operation. cores: Indalloy...
Journal Articles
Alloy Digest (1978) 27 (9): In-2.
Published: 01 September 1978
... to 1OOoC). 4 Compensation for some thermal expansion mismatches. Substantial mismatches, of course, cannot be overcome. *Fluxes, soldering devices, and application procedures for IndalIoy No. 7 are es- sentially similar to those for conventional solders. Heat Treatment: When used as solder, Indalloy No. 7...
Journal Articles
Alloy Digest (1983) 32 (6): Bi-31.
Published: 01 June 1983
... be used but is not recommended), (3) Preheat parts surrounding cavity into which Indalloy 147 is to be poured, (4) Make certain that the cavity is completely filled by puddling the alloy with a fine wire before it solidifies, and (5) Allow up to 10 to 15 hours age hardening (depending on application...
Journal Articles
Alloy Digest (1998) 47 (1): Sn-13.
Published: 01 January 1998
... Indalloy 227 is a lead-free solder developed to replace common tin-lead eutectic solder used in electronics soldering applications. Comparisons are given in this data sheet between Indalloy 227 and 63Sn37Pb, the composition of the alloy that Indalloy 227 was designed to replace. This datasheet...
Journal Articles
Alloy Digest (1980) 29 (9): Sn-10.
Published: 01 September 1980
... be about 3604OOoF (182-204oC) and (4) Preheat parts surrounding cavity into which the alloy is to be poured. Foundry Aids: Indalloy 281-338 can be used for precise duplication of foundry patterns. The patterns do not need to allow for shrinkage in making the duplicates but only for shrinkage...
Journal Articles
Alloy Digest (1982) 31 (9): Bi-29.
Published: 01 September 1982
... Available: Rod, wire, powder, ingot and SO-pound pigs. Applications: Indalloy 281 is suitable for use in a wide range of applications: (I ) Aids in foundry activities, (2) Molds for plastics, (3) Anchoring of parts to be machined, (4) Liquid seals, (5) Fusible elements in safety devices, (6) Low-temperature...
Journal Articles
Alloy Digest (1984) 33 (1): Bi-34.
Published: 01 January 1984
... and polish with a soft brush, the graphite acts as a separator, (3) Spray Indalloy 16&190 over plug and board to 3/16-inch thickness, and (4) Add ribs and reinforcement and bosses for dowels and blow-holes. The purpose of spraying the alloy over the core plug is to assure a shell of accurate dimensions...