IN-861 is a mixed elemental powder metallurgy steel designed for use in the as-sintered condition. It achieves its good mechanical properties by hardening during normal cooling in most commercial sintering furnaces. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating, machining, and powder metal forms. Filing Code: SA-308. Producer or source: International Nickel Company Inc..

Alloy KHP 105 (CuNi1Sn0.5, UNS C19020) is a high-performance copper alloy with additions for strength while maintaining high conductivity. Typical applications include tabs, relays, switches, junction blocks, bus bars, and IC leadframes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: Cu-861. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

Copper Alloy No. C91700 is a medium strength casting alloy. Formerly it was known as Nickel Gear Bronze and 861/2-12- 0-0-11/2; these names are no longer recommended. It has a good combination of strength, ductility and resistance to corrosion and wear. Its typical tensile strength is 60,000 psi in the as-cast condition. Typical applications include gears and worm wheels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-519. Producer or source: Copper alloy foundries.

AK Steel Type 301 is an austenitic chromium-nickel stainless steel that provides high strength and good ductility when cold worked. It is a modification of Type 302, in which the chromium and nickel contents are lowered to increase the cold-work-hardening range. This permits higher tensile strengths to be achieved by rolling with a lower loss of ductility than with Type 302. The high-strength properties of Type 301 make it ideally suited to structural and transportation applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-861. Producer or source: AK Steel Corporation.

Lucefin Group 42CrMo4 and 42CrMoS4 are medium-carbon, 1% chromium-molybdenum, direct hardening, alloy steels that are also suitable for flame hardening, induction hardening, and nitriding. These steels are medium hardenability steels in the 0.40 to 0.42 mean carbon content classification. In general, they are used for medium and large size parts requiring high strength and toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, machining, and joining. Filing Code: SA-861. Producer or source: Lucefin S.p.A.

COPPER ALLOY NO. C72900 is a spinodal alloy that develops exceptionally high elastic strength levels; dimensional stability and relaxation resistance at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: CU-588. Producer or source: Copper and copper alloy mills.

Powder production of copper alloy C72650 achieves 100% density after a series of anneals and cold rolling operations. The technique prevents segregation in high tin alloys, produces a fine grain and homogeneity which favors the decomposition (spinoidal) reaction. Applications include springs for electrical contacts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: CU-598. Producer or source: AMETEK Specialty Metal Products.

Ti 6Al-4V-0.1Ru alloy is an extra-low interstitial alloy version of Ti-6Al-4V offering improved fracture toughness in air and better corrosion resistance to crude oil with chlorides. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance as well as joining. Filing Code: TI-125. Producer or source: RMI Titanium Company.

RMI Ti Beta-C/Pd alloy is a Ti-3Al-8V-6Cr-4Zr-4Mo-0.05Pd alloy also referred to as Grade 20. It is a palladium-containing version of RMI Beta-C alloy possessing equivalent physical and mechanical properties, but with enhanced corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness and creep. It also includes information on high temperature performance. Filing Code: TI-124. Producer or source: RMI Company.

CARPENTER SOLAR alloy is an extremely tough, water-hardening tool steel. Large sections harden to a hard case with a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-494. Producer or source: Carpenter.

UNITEMP 188 provides outstanding oxidation and corrosion resistance, high strength at elevated temperatures, excellent creep and stress-rupture properties and thermal fatigue resistance. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-80. Producer or source: Cytemp Specialty Steel Division, Cyclops. Originally published July 1983, revised October 1990.

CARPENTER 636 is a hardenable stainless steel designed for service up to 1200 F (649 C). It exhibits good resistance to scaling and oxidation in continuous service up to 1400 F (760 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-139. Producer or source: Carpenter. Originally published as Alloy Digest SS-294, December 1962, revised February 1992.

CARPENTER 636 is a hardenable stainless steel designed for service up to 1200 F (649 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-294. Producer or source: Carpenter. Originally published as Alloy Digest SS-139, December 1962, revised February 1992.

Titanium shows outstanding resistance to seawater and marine atmospheres. It is also resistant to attack by hot metallic chloride solutions, sodium and potassium hypochlorite, and chlorine dioxide. The metal is resistant to attack by hot nitric acid at concentrations up to 80% and is not attacked by sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-122. Producer or source: Timet.

Enduro S-1 Nickel is a martensitic type stainless steel combining good corrosion and heat resistance with high strength and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-118. Producer or source: Republic Steel Corporation.

TIMETAL 50A is a commercially pure titanium alloy with a minimum tensile strength of 345 MPa (50 ksi). It is readily formed at room temperature, although complex shapes must be warm formed for satisfactory results. This material is weldable by both electrical resistance and fusion procedures, although the latter methods can be used only if the material is protected from atmospheric contamination. This grade is used in airframe and chemical process applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-120. Producer or source: Timet.

ENDURO S-1 is a chromium type stainless steel providing high strength, toughness and resistance to impact when heat treated. It shows resistance to wet and dry corrosion. It is recommended for steam turbine parts, valves, cutlery, pump components, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-185. Producer or source: Republic Steel Corporation.

ALLEGHENY STAINLESS Type 405, unlike most other 12% chromium steels, is not subject to appreciable hardening through air cooling from high temperatures. This is an advantageous characteristic in those applications where a soft, ductile material is required after rapid cooling from above the critical temperature. The nonhardening tendency of Type 405 also retards the formation of hardening cracks where welding is employed. Its uses include annealing boxes and baffles where hardening during cooling would be undesirable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: SS-461. Producer or source: Allegheny Ludlum Corporation.

AISI TYPE 410 is a hardenable 12% chromium stainless steel. It offers a wide range of mechanical properties and has good resistance to corrosion and oxidation. It can be hardened readily by austenitizing and air cooling. Among its many applications are knives, mechanical blades and other cutting tools for numerous corrosive environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-73. Producer or source: Stainless steel mills. Originally published April 1958, revised October 1985

AISI Types 416 and 416Se are free-maching grades of the low-carbon chromium type stainless steel. The former contains sulfur while the latter contains selenium to produce the free-cutting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-162. Producer or source: Stainless steel mills.