Search Results for IN-102

PYROMET 102 is a nonmagnetic, nickel-chromium base alloy which is solid solution strengthened by the refractory metals niobium, tungsten and molybdenum. It possesses excellent corrosion properties, strength, ductility, toughness and structural stability. It is used as tubing and piping for steam and gas turbines, rocket engines, heat shields, furnace hardware, chemical plant hardware and in sea water environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-198. Producer or source: Carpenter Technology Corporation.

Sylvania WN-102 is a tungsten-base alloy combining high density with high strength in both compression and tension. It is recommended for radioactive shielding, counterweights, electrical contacts for high currents, gyroscopes, flywheels and governors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on forming, machining, and joining. Filing Code: W-12. Producer or source: Sylvania Electric Products Inc..

IN-102 is a nickel-chromium-iron alloy designed for long service at temperatures up to 1300 F. It combines high strength and high ductility at the elevated temperatures with a high degree of structural stability. It is used for aerospace, power and steam turbine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-147. Producer or source: International Nickel Company Inc..

Copper No. 102 is a wrought oxygen-free high-conductivity copper. Its trade designation is OF (Oxygen Free) copper. It can be fabricated by all the conventional methods and is used widely for bus bars, bus conductors and other electrical conductors. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-368. Producer or source: Copper and copper alloy mills.

PERFORM 700 is one of the Perform series of steels, which are low carbon micro-alloyed steels that are thermomechanically rolled. The 700 in the title refers to the minimum yield strength in MPa (102 ksi). The USA equivalent is Perform 102. This datasheet provides information on composition, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-741. Producer or source: ThyssenKrupp Steel Europe AG.

Alloy KHP 102 (UNS C19010) is a high performance copper alloy with additions for strength while maintaining high conductivity. KHP 102 belongs to the group of CuNiSi alloys and is particularly suitable for use in electrical and electronic products. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: Cu-856. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

TIMETAL 62S, because iron is used for the beta stabilizer in lieu of more expensive elements, has a lower formulation cost than most titanium alloys, yet the properties and processing characteristics of Ti-6A1-2Fe-0. 1Si are equivalent to or better than those of the workhorses of the titanium industry, including Ti-6A1-4V. The combination of reasonable cost and excellent mechanical properties make TIMETAL 62S a practical substitute for other engineering materials in numerous industrial applications that require low weight and high corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating. Filing Code: Ti-102. Producer or source: Timet.

CARPENTER GLASS SEALING 42 has wide-ranging applications in glass-to-metal and ceramic-to-metal sealing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, joining, and surface treatment. Filing Code: FE-102. Producer or source: Carpenter.

Conicro 4023 W is a high-temperature, heat-resistant, cobalt-base alloy with equal contents of nickel and chromium, a high tungsten content, and a controlled lanthanum addition. The alloy has excellent mechanincal properties and scaling resistance to 1150 deg C (2100 deg F). This datasheet provides information on composition, physical properties, and elasticity as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CO-102. Producer or source: VDM Technologies Corporation.

LESCALLOY 718 VacArc is a precipitation hardening nickel-base super alloy designed for service at elevated temperatures up to 1300 F where high strength coupled with good ductility and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-102. Producer or source: Latrobe Steel Company.

Aldur® 700 steels (minimum yield strength of 700 MPa, or 102 ksi, for thicknesses up to 50 mm, or 2 in.) are a part of a family of water-quenched, high-strength, fine-grained steels that have excellent toughness at low temperatures. This datasheet provides information on composition, physical properties, and tensile properties. Filing Code: SA-855. Producer or source: Voestalpine Grobblech GmbH.

ACO Eurobar EN-GJS-350-22C is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%. It is specifically designed for applications where tensile strength is less important than the impact and elongation properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-102. Producer or source: ACO Eurobar GmbH.

MICROZINC Alloy 100 is a zinc-lead-cadmium alloy having good ductility with adequate strength, good resistance to corrosion, and a low coefficient of sliding friction. It is solderable and non-magnetic. Processing differences give three commercial products or classes designated= 101, 102 and 103. This alloy does not stain other materials. Its many uses include jewelry, coins and battery cans. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-27. Producer or source: Ball Corporation, Metal and Chemical Division.

Weldox 700 is a general structural steel with a minimum yield strength of 700 MPa (102 ksi). This datasheet provides information on composition, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-567. Producer or source: SSAB Weldox.

UNILOY 1430MV is a high-chromium, molybdenum heat and corrosion resisting steel used for highly stressed parts involving service temperatures up to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-102. Producer or source: Cyclops Corporation.

NICLOY 3 1/2 is a low carbon, nickel ferritic steel recommended for low temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-102. Producer or source: Babcock & Wilcox Company.

UHB-ORVAR is a die casting die steel and a general hot work steel. It is air-hardening, non-deforming, and has high resistance to heat checking and erosive action. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-102. Producer or source: Uddeholm (Canada) Ltd.

Duralumin-K is a high strength, wrought aluminum alloy recommended for highly stressed applications. It responds to the precipitation-hardening heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on as well as forming, heat treating, machining, and joining. Filing Code: Al-102. Producer or source: James Booth & Company Ltd.

NI-VEE TYPE B is a precipitation hardening nickel bronze alloy suitable for constructional castings. This alloy provides the advantage of maximum strength in contact with steel or similar hard and strong coostruction material. It has improved machinability compared with Ni-Vee Type A (Alloy Digest Cu-66, August 1958). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-102. Producer or source: The International Nickel Company Inc..

AISI 1146 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Among its many uses are axles and shafts, screws, spindles, ball joints, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-102. Producer or source: Carbon steel mills.