Search Results for DRIVER 90 ALLOY

DRIVER 90 ALLOY is a copper-nickel alloy for use where only moderately low electrical resistance is required. The number designations refers to its specific resistivity (90 ohms/cir mil/ft) which is combined with a moderate coefficient of resistance. Its maximum recommended operating temperature is 800 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and heat treating. Filing Code: Cu-343. Producer or source: Wilbur B. Driver Company.

DRIVER 180 ALLOY is a copper-nickel alloy for use where moderate electrical resistance is required. The number designation refers to its specific resistivity (180 ohms/cir mil/ft) which is combined with a fairly low coefficient of resistance (180 x 10^-6 per C). Its maximum recommended operating temperature is 1000 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-348. Producer or source: Wilbur B. Driver Company.

DRIVER 60 ALLOY is a copper-nickel alloy for use where fairly low electrical resistance is required. The number designation corresponds to its specific resistivity (60 ohms/cir mil/ft) which is combined with a fairly high temperature coefficient of resistance. Its maximum recommended operating temperature is 600 F (316 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-339. Producer or source: Wilbur B. Driver Company.

NICHROME is a nickel-chromium-iron alloy adapted for high temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-41. Producer or source: Driver-Harris Company.

NICHROME V is a nickel-chromium alloy adapted for high temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-31. Producer or source: Driver-Harris Company.

TOPHET A is a 80Ni-20Cr alloy recommended for high temperature service. It is recommended for temperatures up to 2100 F. It is also very widely used in chemical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-39. Producer or source: Wilbur B. Driver Company.

CHROMAX Def. 520 is an iron-nickel-chromium alloy having high oxidation and heat resistance. It is recommended for operations up to 1900 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-188. Producer or source: Driver-Harris Company.

CERAMVAR is an iron, nickel, cobalt alloy specially designed and suited for ceramic-to-metal sealing. It has expansion characteristics closely matching those of high temperature alumina ceramics. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, machining, joining, and surface treatment. Filing Code: Fe-21. Producer or source: Wilbur B. Driver Company.

CHROMAX is a nickel-chromium-iron alloy suitable for operations at temperatures up to 1900 F. It resists corrosion, heat, and oxidation to a remarkable degree. It is supplied in the cast or wrought form. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: SS-6. Producer or source: Driver-Harris Company.

BERALOY is a beryllium-copper alloy supplied in two grades: Beraloy A and Beraloy D. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-65. Producer or source: Wilbur B. Driver Company.

Cupron is a copper-nickel resistance alloy recommended for maximum operating temperature of 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. Filing Code: Cu-121. Producer or source: Wilbur B. Driver Company.

MAGANIN 130 is an electrical resistance alloy with near constant resistance over the range 15 to 40 C (59 to 104 F). It is used in precision electrical components. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming. Filing Code: Cu-567. Producer or source: Carpenter Technology Corporation.

CMW 100 is a copper alloy that combines high tensile strength with high electrical and thermal conductivity. It responds to age-hardening heat treatment. It is used for flash welding dies, springs, electrical components, high-strength backing material for brazed assemblies, and wire guides. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-29. Producer or source: CMW Inc. Originally published as Mallory 100, August 1955, revised October 2000.

AISI 1065 is a high-carbon oil-hardening machinery and tool steel of low hardenability. It is used for springs, hand tools, machinery parts, shafts and many machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-63. Producer or source: Carbon steel mills.

AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

Dura-Bar 100-70-03 is a pearlitic ductile iron that is used for continuous cast products. It has the best wear resistance of the ascast ductile irons and is used in applications requiring high strength and high wear resistance. This grade is normally used as an alternative to quenched and tempered steels that have hardness values less than 302 HBW. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength. It also includes information on heat treating and machining. Filing Code: CI-74. Producer or source: Charter Dura-Bar, Inc.

AISI 1561 is a high-carbon steel (nominally 0.61 carbon) containing 0.75-1.05% manganese. It has low hardenability and on austenitizing and liquid quenching it develops a hard surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and tempered conditions for numerous applications. It has good machinability and good workability. Its many uses include springs, hand tools, shafts and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-90. Producer or source: Carbon steel mills.

SAE 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-116. Producer or source: Carbon steel mills.

SAE 1065 is a high-carbon oil-hardening machinery and tool steel of low hardenability. It is used for springs, hand tools, machinery parts, shafts and many machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-118. Producer or source: Carbon steel mills.

CRUCIBLE 420 is a hardenable chromium steel designed particularly for cutlery applications. It is the general-purpose cutlery grade of stainless steel. It is magnetic at all times. Among its many applications are bushings, cutlery, valve trim and dental and surgical instruments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-394. Producer or source: Crucible Specialty Metals Division, Colt Industries.