LOCORE M45 is a cold-rolled, non-oriented electrical steel used primarily for alternating current (AC) and direct current (DC) motors, generators and transformers. It is produced either semiprocessed (the consumer anneals to produce the desired magnetic properties) or fully processed (the steel producer develops the magnetic properties to meet the maximum core loss values). This datasheet provides information on composition, physical properties, microstructure, and elasticity. It also includes information on heat treating and joining. Filing Code: SA-353. Producer or source: Republic Steel Corporation.

LOCORE M43 is a cold-rolled, non-oriented electrical steel used primarily for alternating current (AC) and direct current (DC) motors, generators and transformers. It is produced either semiprocessed (the consumer anneals to produce the desired magnetic properties) or fully processed (the steel producer develops the magnetic properties to meet the maximum core loss values). This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-347. Producer or source: Republic Steel Corporation.

NK SUPER-E CORE is a non-oriented silicon steel plate containing 6.5% Si with enhanced magnetic characteristics. Higher silicon level is attained by addition to existing silicon steel plate. This datasheet provides information on composition and physical properties. It also includes information on forming and joining. Filing Code: FE-106. Producer or source: NKK Corporation, Keihin Works.

Hiperco Alloy 15 is a development in soft magnetic alloys that combines the properties of high saturation, magnetization, high electrical resistivity, and lower cobalt content. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming and heat treating. Filing Code: FE-124. Producer or source: Carpenter Technology Corporation.

Rotelloy 5 nominally contains 50% Co and has been specially developed as a high-strength rotor material for machines operating at high speeds. The alloy is less suitable for stator applications since it has higher losses than Rotelloy 3. In some cases, this can be overcome by the use of thinner strip. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: FE-129. Producer or source: Carpenter Technology Corporation.

Rotelloy 3 has the same composition as Permandur 49 and was specifically developed for aircraft generator rotor and stator laminations. In addition to a slightly improved magnetic performance, this grade is supplied with guaranteed minimum mechanical properties. This alloy complies with requirements of ASTM A 801. It is available in strip form only. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on machining. Filing Code: FE-128. Producer or source: Carpenter Technology Corporation.

HS 50 alloy was developed to provide an increase of approximately 0.1 T (1000 G) in saturation magnetization compared with standard Permendur 49. The heat treatment of HS 50 can be carried out at a higher temperature, which gives increased permeability and lower coercive force. The mechanical properties are superior to those of Rotelloy 3. For applications where low loss is required, a thinner gage strip can be used to compensate for the lower resistivity compared with Rotelloy 3. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: FE-130. Producer or source: Carpenter Technology Corporation.

Magnifer 4008 is a soft-magnetic alloy with 40% Ni and 8% Cr. The alloy has high permeability values and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: FE-123. Producer or source: Krupp VDM.

MagneDur 20-4 is a cobalt-free alloy with semihard magnetic properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and heat treating. Filing Code: FE-117. Producer or source: Carpenter.

PERMENDUR V is a cobalt/iron/vanadium soft magnetic alloy. It has a high saturation flux density, low DC coercive force, high permeability at high inductions and a desirably low magnetostrictive coefficient. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Co-85. Producer or source: Spang Specialty Metals.

JNHF-Core is a chemical vapor deposition (CVD) processed, nonoriented, high-silicon soft magnetic steel sheet that has a silicon density gradient of between 3 to 6.5 wt.%. The silicon steel sheet consists of three gradated silicon density areas, a high-Si area, a low-Si area, and another high-Si area, which draws out excellent low core loss at high frequencies and has high saturation induction. This datasheet provides information on physical properties. Filing Code: FE-135. Producer or source: JFE Steel Corporation.

NK Super BR-Core is a soft magnetic material that has low residual induction and low core losses at high frequencies compared with conventional silicon steel sheet. In addition, NK Super Br-Core has high saturation induction. This datasheet provides information on composition and physical properties. Filing Code: FE-121. Producer or source: NKK Corporation, Keihin Works.

Hiperco 50A is an iron-cobalt-vanadium soft magnetic alloy possessing high magnetic saturation, high direct current (dc) maximum permeability, low dc coercive force, and low alternating current (ac) core loss. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: CO-107. Producer or source: Carpenter.

CHROME CORE 8 AND 8-FM alloys are controlled chemistry alloys for use in magnetic components where better corrosion resistance than iron and steel alloys is needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-473. Producer or source: Carpenter.

CARPENTER CHROME CORE 12 AND 12-FM alloys are controlled alloys for use in magnetic components where better corrosion resistance than iron and steel alloys is needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-474. Producer or source: Carpenter.

AncorLam is a high performance insulated particle material suitable for a variety of soft magnetic applications that require low core losses. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on powder metal forms. Filing Code: CS-194. Producer or source: Hoeganaes Corporation.

CARPENTER HIGH PERMEABILITY 49 is an iron-nickel alloy of high magnetic permeability recommended for magnetic and electrical equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating. Filing Code: Fe-25. Producer or source: Carpenter.

Thermodur E38K is a high-quality electroslag remelted special steel with excellent mechanical properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and joining. Filing Code: TS-767. Producer or source: Schmolz + Bickenbach USA Inc..

Chrome Core 13-FM is a ferritic 13% Cr magnetic alloy without a substantial decrease in its saturation induction compared to pure iron. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-968. Producer or source: Carpenter Specialty Alloys.

GMR-235 Alloy is a nickel-base, precipitation-hardening alloy available in investment cast form for high temperature service. It is recommended for gas turbine and jet engine components operating in excess of 1400 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-131. Producer or source: Licensees of the General Motors Corporation.