Skip Nav Destination
Search Results for Copper alloy no. 932
1-20 of 91 Search Results for
Copper alloy no. 932
Alloy Digest (1980) 29 (1): Cu-387.
Published: 01 January 1980
... Copper Alloy No. 932 is a cast bronze containing nominally 7% lead and 7% tin. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Bearing Bronze 660 and 83-7-7-3. It has relatively low strength, good machinability and good resistance to corrosion. Its uses include...
Alloy Digest (1977) 26 (4): Cu-330.
Published: 01 April 1977
... highly resistant to corrosion; it is not attacked by a wide variety of gases and liquids. It is highly resistant to corrosion by industrial, marine and rural atmospheres. Specification Equivalents: ASTM: B 271, CA 932, B 505, CA 932; B 584, CA 932. SAE: CA 932 (formerly 660). CDA: Copper Alloy No. 932...
Alloy Digest (1997) 46 (5): Cu-613.
Published: 01 May 1997
... Equivalents: Copper Alloy No. C89835 General Characteristics: The basis for developing lead-free Federalloy is twofold. Re- moving lead eliminates the health issues associated with leaching lead from plumbing fixtures into water and meets the new OSHA standard for airborne lead (50 pg/m3) in nonfer- rous...
Alloy Digest (1987) 36 (6): Cu-525.
Published: 01 June 1987
... Copper Alloy No. C82400 is a copper-base alloy containing nominally 1.70% beryllium. It is characterized by high strength and good resistance to corrosion. Typical applications include safety tools, molds for parts made of plastics, cams, valves and gears. This datasheet provides information on...
Alloy Digest (1990) 39 (3): Cu-551.
Published: 01 March 1990
..., machining, and joining. Filing Code: Cu-551. Producer or source: Copper and copper alloy mills. Producer or Source: Copper and copper alloy mills Copyright © ASM International® 1996 1996 ASM International chemical composition COPPER No. C15000 elasticity electrical conductivity hardness...
Alloy Digest (1985) 34 (7): Cu-499.
Published: 01 July 1985
... Copper Alloy No. C86700 is a free-machining, high-tensile (typically 85,000 psi) cast manganese bronze; it is also known as high-strength yellow brass. It has an excellent combination of strength and ductility and good resistance to corrosion in numerous environments, including seawater. Typical...
Alloy Digest (1999) 48 (10): Cu-620.
Published: 01 October 1999
... WRM Alloy 194-9 is a modified C19400 with mechanical properties far exceeding the conventional composition (see COPPER ALLOY No. 194, Alloy Digest Cu-233, May 1971). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes...
Alloy Digest (1969) 18 (11): Co-59.
Published: 01 November 1969
... Haynes Stellite No. 4 is a cobalt-base cast alloy recommended for handling severe conditions of abrasion, heat and corrosion. It is especially recommended to resist the severe abrasive and corrosive action of manganese dioxide, carbon particles, and ammonium and zinc chlorides in the battery mix...
Alloy Digest (2013) 62 (12): Cu-828.
Published: 01 December 2013
... treated and subsequently aged to produce these desirable properties. Rod is usually supplied from the mill in the fully aged and drawn condition so no further heat treatment is required by the fabricator. The softening temperature of properly heat-treated C18150 rod exceeds 500 ºC (932 ºF) as compared to...
Alloy Digest (1973) 22 (1): Cu-264.
Published: 01 January 1973
... corrosion cracking or hydrogen embrittlement. The resistance to corrosion is not affected by age hardening. Specification Equivalents: Copper Development Association: CA No. 177. General Characterisitcs: BERYLCO ALLOY lo-52 is a low-beryllium alloy which has an excellent combination of strength and...
Alloy Digest (1982) 31 (6): Cu-438.
Published: 01 June 1982
... resistance as pure copper. Mercury and ammonium compounds and nitric acid are to be avoided. Specification Equivalents: R.W.M.A Group A, Class 2. Copper Alloy No. C18200. UNS Alloy No. C18200. ASTM F 9. *Resistance Welder s Manufacturing Association. General Characteristics: Anaconda Alloy 182 is a heat...
Alloy Digest (2001) 50 (6): Cu-668.
Published: 01 June 2001
... Swissmetal SM453C is a free-machining copper alloy with high electrical conductivity. It is recommended for male contacts in electrical and electronic applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also...
Alloy Digest (2001) 50 (3): Cu-660.
Published: 01 March 2001
... Equivalents: UNS C70250 Olin Brass 7025 No DIN or EN equivalent standards General Characteristics: Wieland-K55 is a high-reliability copper containing small per- centages of nickel and silicon. Mill hardened K55 strip exhibits high strength and good isotropic bend formability. At high cur- rents and high...
Alloy Digest (1967) 16 (3): Cu-174.
Published: 01 March 1967
... or other oxidizing agents. Like copper, it is no: suitable for handling sulfides, mercury or solutions of mercuty compounds, ammonium salts and hydroxide, nitric acid, ferric chloride, ferric sulfate or acid chromares. chsrpy ImpXr fr. Ibs. (keyhole notch) 47.0 48.3 48.3 48.7 46.0 48.0 39.0 40.7 41.7...
Alloy Digest (2001) 50 (6): Cu-667.
Published: 01 June 2001
... saline solutions, it exhibits better resistance to corrosion through abra- sion and pitting than does SF-Cu (UNS C12200). Wieland-K81 is insensitive to stress corrosion cracking (SCC). Specification Equivalents: UNS C14415 No DIN standard EN CuSnO, 15 General Characteristics: Wieland-K81 is a high-copper...
Alloy Digest (1984) 33 (3): Cu-99.
Published: 01 March 1984
... treated 16500F. !I$ hour. quenched. cold worked and aged one hour as shown) Aging Electrical Conductivity. % IACS Temperature Cold Worked Cold Worked OF 55% 90% 68 67 75 212 68 75 392 70 77 572 76 80 752 85 89 932 95 96 III2 96 97 I292 92 95 1472 82 86 Heat Treatment: AMZIRC copper is a heat-treatable...
Alloy Digest (2011) 60 (5): Cu-798.
Published: 01 May 2011
... properties for rod and wire in several tempers are shown in Table 1. See also Fig. 1 and 2. Heat Treatment: The softening temperature of properly heat treated C15000 rod exceeds 500 ºC (932 ºF) as compared to unalloyed, pure copper which softens at 200 ºC (392 ºF) and silver bearing coppers which soften at...
Alloy Digest (1986) 35 (10): Ni-341.
Published: 01 October 1986
... INCO Alloy G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Some of the minor elements are controlled to provide increased resistance to weld heat-affected zone corrosion. The alloy has exceptional stress-corrosion cracking resistance in chloride-containing environments...
Alloy Digest (1983) 32 (6): Cu-459.
Published: 01 June 1983
... AMBRALOY 687 is a copper-zinc-aluminum-arsenic alloy. It is effectively inhibited against dezincification by the small but strictly regulated addition of arsenic (nominally 0.04%). It is superior to Admiralty Metal (Copper Alloys No. C44300, C44400 and C44500) where water is contaminated by sewage...
Alloy Digest (2000) 49 (6): W-2.
Published: 01 June 2000
... metallurgy product and one of a series of alloys with densities 50% greater than lead. CMW, Anviloy, and NO-CHAT are registered trademarks of CMW Inc. Moly-Dee is a trademark of Castrol Inc. Chemical Composition, wt (Nominal) Nickel 6.0 Copper 4.0 Tungsten Balance Physical Properties: Density, kg/m3 (lb/in.3...