BRUSH Alloy 165 has slightly less yield and fatigue strengths than the somewhat higher beryllium-content copper-beryllium alloy. It is cheaper and may be substituted when design requirements are less demanding. It is easily worked to provide complex shapes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-532. Producer or source: Brush Wellman Inc..

Copper Alloy No. 165 is a copper-cadmium-tin alloy with low strength and high ductility in the annealed condition. In the hard-drawn condition, characterized by high strength and low ductility, it is used widely as an electrical conductor. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-327. Producer or source: Copper and copper alloy mills.

HITENSO 165 offers an excellent and difficult-to-acquire combination of high tensile strength and good electrical conductivity. The nominal composition of 98.58% copper with cadmium, tin and silver gives it high-strength and wear characteristics while retaining good conductivity. It is used as trolley wire because of its exceptional durability for curves and switches on electrified railroads carrying heavy traffic and for trackless trolleys where wear is high. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-423. Producer or source: Anaconda Industries.

Berylco 165 is a lower cost version of the standard 1.9 percent beryllium copper alloy. It offers good formability in the unhardened condition with high final properties following precipitation hardening. It is also available in the mill hardened condition which, without heat treatment by the fabricator, reaches strengths and hardnesses appreciably higher than bronze. Through good formability, it offers cost-saving opportunities by eliminating hardening. It combines good ductility with high strength and hardness, good electrical and thermal conductivity, and excellent resistance to wear and fatigue. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-20. Producer or source: Beryllium Corporation. Originally published November 1954, revised April 1963.

Copper Alloy No. 172 is a precipitation hardening beryllium-copper alloy having high elastic and endurance strength, good electrical and thermal conductivity, excellent resistance to wear, and high resistance to general corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-165. Producer or source: Copper and copper alloy mills.

ALLOY 380 is an aluminum/silicon die casting alloy with controlled copper content (3-4%). This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting and heat treating. Filing Code: Al-311. Producer or source: Aluminum Smelting and Refining Company Inc..

BrushForm 158 is a spinodal alloy that develops exceptionally high elastic strength levels, dimensional stability, and relaxation resistance at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. and bend strength. It also includes information on forming. Filing Code: Cu-832. Producer or source: Materion Brush Performance Alloys.

COPPER ALLOY NO. C72900 is a spinodal alloy that develops exceptionally high elastic strength levels; dimensional stability and relaxation resistance at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: CU-588. Producer or source: Copper and copper alloy mills.

NICLOY 400 is a nickel-copper, solid-solution alloy which is utilized in numerous applications because of its good mechanical strength and overall excellent resistance to corrosion. Among its many uses are pump parts, marine fixtures, oil production and refining equipment, heat exchangers and numerous machined parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-304. Producer or source: Babcock & Wilcox Company.

Copper No. 150 contains nominally 0.15% zirconium. It retains high conductivity with good hardness, strength and ductility at elevated temperatures. Applications include collector rings, bearings and current-carrying shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-312. Producer or source: Copper and copper alloy mills.

NICORROS 400 is a nickel-copper, solid-solution alloy having excellent corrosion resistance in a wide range of marine and chemical environments and good mechanical properties from sub-zero temperatures to about 900 F. Among its uses are pump parts, heat exchangers, petroleum production and refinery equipment and marine equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-312. Producer or source: Vereingte Deutsche Metallwerke AG.

Rio Tinto 355.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting, for the production of sand and permanent mold castings. It is a high-strength alloy with many desirable characteristics. The presence of copper in alloy 355.0 increases strength but reduces corrosion resistance and ductility. This alloy is less ductile than 356.0. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-486. Producer or source: Rio Tinto.

Kobelco Alloy KFC has very high conductivity for leadframe applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. and bend strength. It also includes information on forming. Filing Code: Cu-853. Producer or source: Kobe Steel Ltd, Aluminum and Copper Business.

ELKONITE 1W3, 3W3, 3W53, 5W3, 10W3, 10W53, 30W3, 40W3, 50W3,and 2050C are a series of tungsten-copper compositions with the tungsten content ranging from 50 to 90 wt.%. These alloys are normally made by the press-sinter-infiltrate (PSI) method. This datasheet provides information on composition, physical properties, microstructure, and bend strength. It also includes information on heat treating. Filing Code: W-25. Producer or source: CMW Inc.

Rio Tinto Alloy 242.2 is a heat-treatable, aluminum-copper-magnesium-nickel casting alloy. It is available in the form of ingots to be remelted for the manufacture of sand and permanent mold castings. Alloy 242.0 is used extensively for applications requiring high strength and hardness at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Al-463. Producer or source: Rio Tinto Limited.

BERYLCO-10CR is a heat treatable, beryllium-copper casting alloy having high elastic and endurance strength, high ductility and impact strength, and high electrical and thermal conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-59. Producer or source: Beryllium Corporation.

REMANIT 4539 is a low carbon corrosion resistant austenitic stainless steel with good levels of chromium, nickel, molybdenum, copper and nitrogen to show good resistance to reducing acids and chloride solutions. It was one of the early alloys used in flue gas desulfurization equipment. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-560. Producer or source: Thyssen Stahl AG.

Olin 172 (UNS C17200) has a relatively high beryllium content and the ability to reach tensile strengths near 1380 MPa (200 ksi) This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming and heat treating. Filing Code: CU-621. Producer or source: Olin Brass.

Alloy CuSn10 is a high-performance copper alloy. The alloy is characterized by good electrical and thermal conductivity and very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength. It also includes information on corrosion and wear resistance as well as forming and joining. Filing Code: Cu-877. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

Alloy CuSn6 (UNS C51900) is a high-performance copper alloy. Typical uses include components for the electronics industry such as connector springs, relays, leaf springs, and switches as well as machine parts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-873. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.