Search Results for Carpenter STAINLESS no. 20

CARPENTER STAINLESS No. 20 and No. 20-Cb are wrought low carbon austenitic alloy steels of high nickel and chromium content. They are highly resistant to hot and cold strong acids. No. 20-Cb contains columbium for carbide stabilization and retention of its corrosion resistance in the as-welded condition. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-63. Producer or source: Carpenter.

Carpenter CTS-204P (Micro Melt 20-4) alloy is a highly wear- and corrosion-resistant, air-hardening martensitic cold-work stainless die steel produced using Carpenter’s Micro-Melt powder metallurgy process. The excellent wear resistance of the alloy is provided by a significant volume fraction of hard vanadium-rich carbides, while the outstanding corrosion resistance of the alloy is obtained as a result of the chromium-rich matrix. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: SS-1051. Producer or source: Carpenter Specialty Alloys.

CARPENTER STAINLESS No. 7-Mo is a two-phase alloy consisting of a ferritic matrix with pools of austenite. It has high resistance to stress-corrosion cracking and pitting, and good general corrosion resistance in many environments. Its principal use is for tubing and pipe in heat exchangers involving corrosive conditions. It is normally used in the annealed condition for maximum corrosion resistance and ductility. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-298. Producer or source: Carpenter.

20Mo-4 stainless complements 20 Cb-3 (Alloy Digest SS-182, June 1966) in that it offers good reducing acid corrosion with better pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-484. Producer or source: Carpenter.

CARPENTER PROJECT 70 STAINLESS TYPE 416 is an improved modification of Carpenter Stainless No. 5, the first free-machining stainless steel ever made. This grade has significantly better machinability than the conventional AISI Type 416. Carpenter Project 70 Stainless Type 416 is suited particularly for automatic screw-machine operations where the longer tool life results in more productive machine time. Among its many uses are fittings, gears, shafts and valve stems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-459. Producer or source: Carpenter.

CARPENTER STAINLESS TYPE 414 is a hardenable (martensitic), nickel-bearing chromium steel. It resists corrosion from the atmosphere, fresh water, mine water, crude oil, blood, alcohol, mercury and many other reagents; however, it is rarely considered for high-temperature service because scale formation starts when 1200 F (649 C) is exceeded. Type 414 is used for many heat-treated parts such as high-strength bolts and nuts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-438. Producer or source: Carpenter.

CARPENTER STAINLESS No. 404 is a hardenable, weldable, fully martensitic alloy for use in highly stressed parts at temperatures up to 1050 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-284. Producer or source: Carpenter. See also Alloy Digest SS-210, June 1968.

CARPENTER STAINLESS TYPE 430F is a free-cutting steel and is recommended for faster cutting and lower costs when making machined articles from a stainless steel containing 14-18% chromium. It is used in automatic screw machines for parts that require good resistance to corrosion. Examples of such parts are aircraft components and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-455. Producer or source: Carpenter.

Carpenter Type 409Cb stainless steel is a 11% Cr steel stabilized with columbium (niobium). The alloy is used extensively in automobile exhast systems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-658. Producer or source: Carpenter.

CARPENTER STAINLESS TYPE 305 has higher nickel content than the austenitic stainless steels considered to be in the 18% chromium-8% nickel category. Its high nickel content lowers the rate of strain hardening and, therefore, allows severe cold forming operations without the necessity of intermediate process anneals in comparison to the common 18-8 austenitic grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-401. Producer or source: Carpenter.

CARPENTER STAINLESS TYPE 443 is a heat-resisting chromium steel which stands up very well under destructive scaling conditions up to 1600 F (871 C). It is not subject to intergranular corrosion as a result of hot working, welding or continuous operation at elevated temperatures. Type 443 is comparable to the 18-8 chromium-nickel stainless steels in resistance to both corrosion and scaling but is not as though as they are nor as hard at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-391. Producer or source: Carpenter.

CARPENTER STAINLESS 22Cr-13Ni-5Mn has very good corrosion resistance in combination with high strength. It has better corrosion resistance than AISI Type 316 stainless steel and approximately twice the yield strength. Carpenter 22Cr-13Ni-5Mn can be machined, cold worked and welded using the same equipment and methods used for the conventional AISI 300 series of stainless steels. It is nonmagnetic as annealed and after severe cold work. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-353. Producer or source: Carpenter.

CARPENTER STAINLESS TYPE 420F is a martensitic stainless that is easy to machine, grind and polish. In service it exhibits certain nongalling and nonseizing characteristics. It is used mainly for machined parts that require high hardness and good resistance to corrosion. Its applications include pump shafts, gears, cams and pivots. This alloy is not usually recommended for vessels containing gases or liquid under high pressure. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-400. Producer or source: Carpenter.

Carpenter 303 aluminum modified stainless steel is free machining, but has better formability than Type 303 Se (see Alloy Digest SS-379, January 1981). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-940. Producer or source: Carpenter Specialty Alloys.

CARPENTER STAINLESS TYPE 405 is a 12% chromium stainless steel that does not harden appreciably. It was designed to allow its use in the as-welded condition. It is particularly desirable for welded applications which require finish machining. It has moderate tensile strength (70,000 psi) in the fully annealed condition and resists corrosion in mild environments. It is used for parts and structures that cannot be annealed after welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-395. Producer or source: Carpenter.

CARPENTER AL-6XN is an improved version of AL-6X (Alloy Digest SS-349, April 1978), with higher nitrogen. The alloy is improved in pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-607. Producer or source: Carpenter.

Carpenter Stainless No. 404 is recommended for highly stressed parts at temperatures up to 1050 F where joining is a problem. It is both hardenable and weldable. It is used for steam turbine buckets, blades and diaphrams. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-210. Producer or source: Carpenter. See also Alloy Digest SS-284, December 1972.

CARPENTER STAINLESS 21 Cr-6Ni-9Mn combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures, good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as AISI Types 304 and 316, and is readily weldable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-357. Producer or source: Carpenter.

CARPENTER STAINLESS TYPE 304HN is essentially a high-nitrogen version of AISI Type 304 stainless steel. By means of solid-solution strengthening, the nitrogen provides significantly higher yield strength and tensile strength as annealed than conventional Type 304, without adversely affecting ductility, corrosion resistance or nonmagnetic properties. Its applications include aircraft and aerospace components and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-368. Producer or source: Carpenter. See also Alloy Digest SS-763, September 1999.

CARPENTER STAINLESS TYPE 440A is a high-carbon chromium steel designed to provide stainless properties at high hardness. It has sufficient corrosion resistance in the annealed condition to permit its use in mild environments. In some respects it behaves similarly to tool steels. It can be austenitized and quenched to a hardness of Rockwell C56. Its applications include dental and surgical instruments, cutlery and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-452. Producer or source: Carpenter Technology Corporation.