1-17 of 17 Search Results for

Carpenter High Permeability 49

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1964) 13 (5): Fe-25.
Published: 01 May 1964
... CARPENTER HIGH PERMEABILITY 49 is an iron-nickel alloy of high magnetic permeability recommended for magnetic and electrical equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also...
Journal Articles
Alloy Digest (2004) 53 (2): Fe-126.
Published: 01 February 2004
... Permendur 49 is an alloy with nominal composition 49% cobalt, 49% iron and 2% vanadium which combines high saturation with high permeability. It can be supplied as forged section, or strip normally in the range 0.1 to 1.0 mm (0.004 to 0.94 in.) thickness. This datasheet provides information...
Journal Articles
Alloy Digest (2004) 53 (6): Fe-130.
Published: 01 June 2004
... includes information on high temperature performance as well as heat treating and machining. Filing Code: FE-130. Producer or source: Carpenter Technology Corporation. Producer or Source: Carpenter Technology Corporation Copyright © ASM International® 2004 2004 ASM International CARPENTER HS...
Journal Articles
Alloy Digest (1979) 28 (10): SS-368.
Published: 01 October 1979
... CARPENTER STAINLESS TYPE 304HN is essentially a high-nitrogen version of AISI Type 304 stainless steel. By means of solid-solution strengthening, the nitrogen provides significantly higher yield strength and tensile strength as annealed than conventional Type 304, without adversely affecting...
Journal Articles
Alloy Digest (2004) 53 (4): Fe-128.
Published: 01 April 2004
... are the tendency to brittleness and the need to avoid overheating, which can lead to surface cracking. Care should be taken to ensure pressure is not unduly localized when the material is held in a chuck or clamped. Fairly high approach angles (approximately 30°) should be used to prevent breakup or runout of cuts...
Journal Articles
Alloy Digest (2004) 53 (3): Fe-127.
Published: 01 March 2004
... and missiles, and for high-performance loud speakers. Producer: Carpenter Technology, Ltd. Napier Way Crawley, West Sussex, RH10 2RB England +44 1293 55 1190 +44 1293 53 7313 (fax) USA: Carpenter Technology Corporation Wyomissing , PA 19610 (800) 654-6543 ISSN: 002-614X Fe-127B Fig. 3 Typical loss curves...
Journal Articles
Alloy Digest (1991) 40 (11): Co-82.
Published: 01 November 1991
... CARPENTER MP35N alloy is a nickel/cobalt/chromium/molybdenum alloy with ultra-high strength, good ductility and toughness. It is highly resistant to corrosion including sulfidation, high-temperature oxidation and hydrogen embrittlement. This datasheet provides information on composition, physical...
Journal Articles
Alloy Digest (1977) 26 (10): SS-344.
Published: 01 October 1977
... CARPENTER STAINLESS 18-18 PLUS is an 18 chromium-18 manganese austenitic stainless steel which provides twice the yield strength of AISI Type 304 stainless steel and corrosion resistance similar to AISI Type 316 in some media. It has excellent ductility and toughness and good high-temperature...
Journal Articles
Alloy Digest (1954) 3 (4): SS-14.
Published: 01 April 1954
...- proves its ma&inabiIity. single point turning tools of high speed steel should be ground to 5-10 deg. back rake, 5-10 deg. top rake, 5-8 deg. side dearance, 7-10 deg. front dearance, 8-15 deg. cutting-edge angle, and 10-15 deg. lead angle. Keep the cutting edges sharp and smooth, free from rough spots...
Journal Articles
Alloy Digest (1984) 33 (5): SS-444.
Published: 01 May 1984
.... It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-444. Producer or source: Carpenter. Producer or Source: Carpenter Copyright © ASM International® 1996 1996 ASM International...
Journal Articles
Alloy Digest (1982) 31 (2): SS-401.
Published: 01 February 1982
... CARPENTER STAINLESS TYPE 305 has higher nickel content than the austenitic stainless steels considered to be in the 18% chromium-8% nickel category. Its high nickel content lowers the rate of strain hardening and, therefore, allows severe cold forming operations without the necessity...
Journal Articles
Alloy Digest (1952) 1 (1): SS-1.
Published: 01 September 1952
... operations. Availability: Bars, bars for forgings, and plates. Applicatioas: Used where high strength and corrosion resistance are r~- quired. Cams. rollers, bearings, valves in the oil, chemical and food industries. plug valves, gates and Kak. dam mechanisms. etc. for engaging surfaces. MOWfaCtU~r: Carnegie...
Journal Articles
Alloy Digest (1954) 3 (9): CI-8.
Published: 01 September 1954
... MEEHANITE GC is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, permanent molds, lathe beds, bases, pistons...
Journal Articles
Alloy Digest (1999) 48 (7): Ni-556.
Published: 01 July 1999
... 20Mo-6® HS STAINLESS (High-Strength Corrosion-Resistant Austenitic Stainless Steel) Carpenter 20Mo-6 HS is an alloy in the generic family of 6% molybdenum alloys, which are very corrosion resistant. This steel also possesses an excellent resis- tance to environmental cracking (see Alloy Digest SS-444...
Journal Articles
Alloy Digest (1954) 3 (9): SS-18.
Published: 01 September 1954
... STANDARD HR-6 is a high chromium-nickel, medium carbon steel of high corrosion and heat resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature...
Journal Articles
Alloy Digest (2007) 56 (2): SS-986.
Published: 01 February 2007
... Gall-Tough Plus Stainless is a modification and improvement of Gall-Tough (Alloy Digest SS-510, November 1989). Gall-Tough Plus stainless is an austenitic stainless steel that possesses superior self-mated galling and metal-to-metal wear resistance. It is stronger and has better high-temperature...
Journal Articles
Alloy Digest (1999) 48 (8): SS-757.
Published: 01 August 1999
... Properties: Density, kg/m3 (lb/in.3) 7630 (0.276) Magnetic permeability <1.01 Mechanical Properties: Tensile Properties. BioDur 108 alloy has high strength levels and a high work hardening rate due to its high nitrogen content. Tables 1 and 2 illustrate typical tensile properties in the annealed and cold...