Types G-1 and G-2 gray iron bar and plate produced by continuous casting have consistent density and hardness with improved toughness, providing greater durability and more dependable performance than conventionally cast grades. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on heat treating and machining. Filing Code: CI-57. Producer or source: Federal Bronze Products Inc..

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

ACO Eurobar EN-GJL-150C (5.1102) is a low-tensile-strength gray cast iron that is produced by the continuous casting process. It is useful in situations where very high thermal conductivity, machinability, and damping capacity are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: CI-89. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJL-300C (5.1308) is a higher-tensile-strength gray cast iron that is produced by the continuous casting process. It provides a combination of high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on wear resistance as well as heat treating and machining. Filing Code: CI-99. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. Brinell hardness values in Table 3 corrected September 2022. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

Dura-Bar 202 (Type 2) Ni-Resist Iron is a flake graphite austentic cast iron that is produced by the continuous casting process. It is suitable for most applications requiring Dura-Bar 201 (Type 1) Ni-Resist Iron, and the grades are often used interchangeably. The machinability of Dura-Bar 202 (Type 2) Ni-Resist Iron will be similar to the pearlitic grades of gray iron, namely G2 and G2A. It is especially suitable for service temperatures above 705°C (1300°F) and in the stem handleing applications. Copper levels are maximized at 0.50%, and this grade is suitable for food grade applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: CI-100. Producer or source: Dura-Bar Metal Services.

Dura-Bar G2 is a gray cast iron bar is used for continuous cast products. It is a good fit for a variety of applications due to its good machinability, wear resistance, and vibration damping properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: CI-65. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar G2P is a pearlitic gray cast iron that is used for continuous cast products. It was developed to best suit flame and induction hardening. G2P is made with a substantial amount of pearlite in the rim. This requires the least amount of stock removal for achieving a heat-treatable surface. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining. Filing Code: CI-68. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar G2 is a gray cast iron bar is used for continuous cast products. It is a good fit for a variety of applications due to its good machinability, wear resistance, and vibration damping properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: CI-65. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar G2A is a gray cast iron that is used for the production of continuous cast products. It contains Type VII, Distribution D flake graphite in a predominantly pearlitic matrix and is typically used in permanent mold applications requiring a combination of optimal strength and wear resistance, and superior surface finish. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fatigue. It also includes information on heat treating. Filing Code: CI-77. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar G2S is a high strength, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of superior hardenability, strength, and creep resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-80. Producer or source: Charter Dura-Bar, Inc.

Dura-Bar GX is a heat-treatable, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of moderate strength, good wear resistance, and good vibration damping capacity. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-83. Producer or source: Charter Dura-Bar, Inc.

Ductile Iron grade 45-12 produced by continuous casting has consistent density and fine grain structure. It is the softest of the regular grades of ductile iron and it machines at high speeds with good surface finish. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: CI-58. Producer or source: Federal Bronze Products Inc..

Meehanite GE225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix and a minimum tensile strength of 225 MPa (33 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, Meehanite GE225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity and machinability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: CI-84. Producer or source: Meehanite Metal Corporation.

Meehanite GB300 is a pearlitic gray cast iron that has a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This grade exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials, such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-75. Producer or source: Meehanite Metal Corporation.

Meehanite GE200 is an intermediate-tensile-strength gray cast iron that has a minimum tensile strength of 200 MPa (29 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This material is generally used for smaller parts with wall thicknesses above 5 mm (3/16 in.). It has excellent fluidity, no tendency towards hard edges and a uniformly fine structure with small proportions of ferrite and is, therefore, readily machinable. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-87. Producer or source: Meehanite Metal Corporation.

JSA FC350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 350 MPa (51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: CI-92. Producer or source: Japanese Standards Association (JSA).

JSA FC300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. The tensile strength of JSA FC300 approaches the maximum tensile strength attainable in gray cast iron. It provides a combination of high strength while still maintaining good thermal conductivity. Applications, therefore, tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-97. Producer or source: Japanese Standards Association (JSA).

CEN EN-GJL-200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, CEN EN-GJL-200 contains lower carbon and silicon contents and exhibits superior wear properties, while still maintaining good thermal conductivity, good damping capacity, and good machinability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on casting, heat treating, and machining. Filing Code: CI-96. Producer or source: European Committee for Standardization (CEN).

ISO 185/JL/300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix; it has a tensile strength of 300–400 MPa (44–58 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-82. Producer or source: International Organization for Standardization.