COLMONOY No. 4 is a nickel-base alloy containing chromium boride. It is recommended for hard surfacing parts to resist wear, heat, corrosion and galling. Deposits, which have only moderate hardness (Rockwell C 35-40), can be machined with carbide tooling. Also, deposits have fairly good workability, ductility and impact strength. This alloy is supplied as crushed powder for application with Wall Colmonoy's SPRAYWELD Process. Also, it is supplied as castings and as bare or coated rod for either oxyacetylene of DC electic-arc (reverse polarity) application. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-222. Producer or source: Wall Colmonoy Corporation.

Colmonoy No. 1 is an abrasion-resistant alloy for high-impact applications such as dipper teeth, mill hammers, and catalyst valves. Colmonoy Special No. 1 is an abrasion-resistant iron-base alloy for use where impact is moderate such as ash plows, coal chutes, and dredge cutters. Both alloys can be ground. This datasheet provides information on composition, physical properties, and hardness. It also includes information on surface qualities as well as joining. Filing Code: SS-843. Producer or source: Wall Colmonoy Corporation.

COLMONOY No. 23A and No. 24 comprise two grades of one nickel-base alloy. The two grades arise from differences in the physical characteristics of the two alloy powders which are applied with Colmonoy's FUSEWELD process. No. 23A is superior for repairing surface flaws of cast-iron components and No. 24 is superior for building-up edges or corners of cast-iron components, such as used in the glass industry. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-239. Producer or source: Wall Colmonoy Corporation.

Colmonoy No. 21 is a nickel-base alloy for repairing cast iron parts. The deposit has high oxidation resistance, develops a hardness of Rockwell C 26-31, and is easily finished by filing or grinding. This datasheet provides information on composition, physical properties, and hardness. It also includes information on machining, joining, and powder metal forms. Filing Code: Ni-504. Producer or source: Wall Colmonoy Corporation.

COLMONOY No. 83 PTA is a nickel-base hard surfacing alloy containing tungsten carbide. The application method is plasma transferred arc and the application is designed to protect extrusion screws. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and compressive strength. It also includes information on wear resistance as well as machining and powder metal forms. Filing Code: Ni-493. Producer or source: Wall Colmonoy Corporation.

Colmonoy No. 63HV is a nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat, and galling. The hardness of Colmonoy 63HV ranges to 58–61 HRC, and it is resistant to abrasion. Colmonoy 63HV is sized exclusively for high-velocity oxygen-fuel thermal spray systems. This datasheet provides information on composition. It also includes information on heat treating, surface treatment, and powder metal forms. Filing Code: Ni-665. Producer or source: Wall Colmonoy Corporation.

Colmonoy No. 6 is a high-carbon, nickel-base alloy recommended for hard facing parts to resist wear, corrosion, heat and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-78. Producer or source: Wall Colmonoy Corporation.

COLMONOY NO. 88 is a nickel-based hard-surfacing alloy with bimetallic carbides for maximum wear resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on machining and powder metal forms. Filing Code: Ni-429. Producer or source: Wall Colmonoy Corporation.

COLMONOY No. 69SC is a nickel-base hard surfacing alloy incorporating the qualities of Colmonoy No. 69 (Alloy Digest Ni-206, July 1974) with other enhancements. Its extended plastic range means that sagging and running of other-than-horizontal surfaces during finishing is virtually eliminated. It is supplied as an atomized powder for application with Wall Colmonoy’s SPRAYWELD Process and finished by grinding. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Ni-489. Producer or source: Wall Colmonoy Corporation.

NICROBRAZ 160 is for wide clearance joints where heavier fillets or greater joint ductility and machinability are desired. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-472. Producer or source: Wall Colmonoy Corporation.

NICROBRAZ 170 is an extra high strength at high temperature braze filler metal. It is good for brazing nickel-base materials containing cobalt, tungsten, and molybdenum. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-476. Producer or source: Wall Colmonoy Corporation.

NICROBRAZ 30 is used for well diffused, high strength, heat resistant joints, and highly stressed structures such as jet engine parts. It is also used in nuclear reactors where boron cannot be tolerated. It has low base-metal penetration. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-457. Producer or source: Wall Colmonoy Corporation.

NICROBRAZ 50 is a low-melting, free-flowing filter metal for honeycomb structures and thin-walled tube assemblies. It has low solubility. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-460. Producer or source: Wall Colmonoy Corporation.

CuBraz is a copper powder mixed in a gel-type binder, for airpowered applicators. It is for brazing iron or steel assemblies and can be easily applied prior to furnace brazing. This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: CU-597. Producer or source: Wall Colmonoy Corporation.

Wallex No. 6 is a cobalt-base alloy recommended for hard facing parts to resist impact, corrosion and oxidation at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, and deformation. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-36. Producer or source: Wall Colmonoy Corporation.

Nicrobraz is a free-flowing nickel brazing filler metal with a wide melting range and low diffusion with most base metals. The brazing metal meets AWS, AMS, G.E., and other specifications. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-525. Producer or source: Wall Colmonoy Corporation.

NITRONIC 30 is a nitrogen-strengthened stainless steel with a good combination of strength, corrosion and wet abrasive wear resistance and economy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, and deformation. It also includes information on corrosion and wear resistance as well as forming, heat treating, and joining. Filing Code: SS-533. Producer or source: Armco Advanced Materials Corporation.