CARPENTER NO. 158 ALLOY is a chromium-nickel carburizing steel ideally suited for jobs requiring an extra measure of core strength in sections up to 5 inches thick. Additionally, the steel develops high wear resistant case characteristics when carburized and hardened. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. Filing Code: SA-37. Producer or source: Carpenter. Originally published January 1956, revised May 1991.

Carpenter Hy-Ra 80 is a nickel-iron-molybdenum alloy specially processed to exhibit square hystereris loop properties. It is recommended for tape wound toroids which will show specific magnetic characteristics after hydrogen annealing. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: Ni-158. Producer or source: Carpenter.

CARPENTER AL-6XN is an improved version of AL-6X (Alloy Digest SS-349, April 1978), with higher nitrogen. The alloy is improved in pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-607. Producer or source: Carpenter.

Carpenter Stainless Type 416BQ is a modification of Type 416 to achieve a minimum hardness of 40 HRC when bright hardened, while retaining nearly the machinability of Type 416. Typical applications are cutters in food processing. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-807. Producer or source: Carpenter.

CARPENTER 20Mo-6 is an austenitic stainless steel which is resistant to corrosion in hot chloride environments with low pH. It has good resistance to pitting and stress-corrosion cracking in chloride environments and is also resistant to oxidizing media. Its good resistance to corrosion has been demonstrated in both laboratory and field tests. These tests indicate that potential applications for Carpenter 20Mo-6 include environments where HASTELLOY Alloy G (Cabot Corporation) is acceptable. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-444. Producer or source: Carpenter.

CarTech AFA 25 stainless has a unique combination of oxidation resistance and creep strength by intermetallic phases. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1211. Producer or source: Carpenter Technology Corporation.

Custom 475 stainless is a premium melted, high-strength, martensitic, precipitation-hardenable stainless steel. It provides good corrosion resistance and was designed to achieve a tensile strength up to 2000 MPa (290 ksi), combined with good toughness and ductility when in the H975 condition, peak aged at 525 deg C (975 deg F). Other combinations of strength are possible by applying aging temperatures up to 595 deg C (1100 deg F). The alloy is available in strip, wire, and small diameter bar. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-974. Producer or source: Carpenter Technology Corporation.

MANIFLEX-FM is a free-machining chromium-nickel austenitic stainless steel which offers excellent high-temperature strength and hardness with good corrosion resistance to combustion products. It is widely used exhaust components in automotive engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-291. Producer or source: Carpenter.

Carpenter Custom 465 stainless steel is an age-hardenable martensitic alloy with less sensitivity to process parameters than other similar alloys. It develops high strength along with fracture toughness and resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-716. Producer or source: Carpenter.

Carpenter Hi-Shock 60 is an air-hardening tool steel for tools and dies which require extreme shock resistance with tensile strengths over 350,000 psi. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-139. Producer or source: Carpenter.

Hiperco 50HS is an improved soft magnetic alloy with a finer grain size that produces greater strengths than those found in Hiperco 50 (Alloy Digest Co-83, February 1988). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on heat treating. Filing Code: CO-105. Producer or source: Carpenter. Originally published March 1998, corrected June 1998.

THERMO-SPAN ALLOY is a precipitation-hardenable superalloy with a low coefficient of expansion combined with tensile and stress-rupture strength. Thermal fatigue resistance is inherent. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming and heat treating. Filing Code: FE-105. Producer or source: Carpenter.

Trinamet is a hardenable martensitic stainless steel with fabrication similar to Type 410. It is used in fasteners. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-984. Producer or source: Carpenter Specialty Alloys.

CarTech 410 is a martensitic stainless steel that is suitable for highly stressed parts where corrosion resistance, good strength, and ductility are needed. This alloy can be used up to 650 °C (1200 °F) where resistance to scaling and oxidation is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1354. Producer or source: Carpenter Technology Corporation.

Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

CarTech MP35N is a wrought Co-Ni-Cr-Mo alloy that possesses a unique combination of ultra-high tensile strength (up to 2070 MPa, or 300 ksi), good ductility and toughness, and excellent corrosion resistance. The unique properties of CarTech MP35N are developed through work hardening, phase transformation, and aging. If the alloy is used in the fully work hardened condition, service temperatures up to 400 °C (750 °F) are suggested. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-134. Producer or source: Carpenter Technology Corporation.

PYROMET 680 is a nonmagnetic nickel-base alloy that derives its exceptional properties up to 2200 F (1200 C) from solid solution strengthening. Among its applications are gas turbine components and furnace hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-187. Producer or source: Carpenter Technology Corporation. Originally published March 1973, revised March 1978.