1059, 1060, C60, C60E, and C60R are wrought high-carbon non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1059, 1060, C60E, and C60R may also be flame or induction hardened. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CS-220. Producer or source: Data Survey.

1059, 1060, C60, C60E, and C60R are wrought high-carbon (carbon = 0.55–0.65%) non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1059, 1060, C60E, and C60R may also be flame or induction hardened, nitrided, or nitrocarburized. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-259. Producer or source: Heat Treater's Guide.

Lucefin C60, C60E, and C60R are high-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. C60E and C60R may also be flame or induction hardened. C60, C60E, and C60R are used for applications where the higher carbon is needed to improve wear characteristics and where strength levels required are higher than those attainable with the lower carbon grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-213. Producer or source: Lucefin S.p.A.

ALX is a composition of nonferrous materials with a cobalt base containing chromium, tungsten and carbon. This alloy is commonly supplied in the cast-to-shape form, having an as-cast hardness of Rockwell C60-62 and requiring no further heat treatment. ALX is also supplied as cast tool bit material and is useful where conventional high-speed steels or carbides do not function effectively. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Co-35. Producer or source: Allegheny Ludlum Corporation.

Vicalloy II is a precipitation hardening cobalt-base alloy recommended for electromechanical devices. It is a permanent magnet alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-58. Producer or source: Crucible Steel Division, Colt Industries.

COLMONOY No. 68 is specifically designed for centrifugal casting of bimetallic barrels and liners for corrosive applications such as fluoropolymer processing. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as casting, machining, and surface treatment. Filing Code: Ni-486. Producer or source: Wall Colmonoy Corporation.

COLMONOY No. 845 is a complex of both a matrix alloy enriched with an extremely hard grade of tungsten carbide. It is specifically formulated to produce hardness levels of RC 57-62. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and compressive strength. It also includes information on machining, joining, surface treatment, and powder metal forms. Filing Code: Ni-487. Producer or source: Wall Colmonoy Corporation.

COLMONOY NO. 84 contains tungsten to harden the matrix and provide for good hard-facing. It is a nickel alternative to cobalt surfacing alloys, for service temperatures up to 1500 F. Boron and Silicon content provide better weldability at lower application temperatures. This datasheet provides information on composition and physical properties. It also includes information on forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-433. Producer or source: Wall Colmonoy Corporation.

COLMONOY NO. 88 is a nickel-based hard-surfacing alloy with bimetallic carbides for maximum wear resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on machining and powder metal forms. Filing Code: Ni-429. Producer or source: Wall Colmonoy Corporation.

Wallex Nos. 55 and 505 are similar composite hardfacing powders with different mesh size for different application methods. The minimum hardness is RC 58. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as powder metal forms. Filing Code: CO-98. Producer or source: Wall Colmonoy Corporation.

Colmonoy 750 is a tough Ni-Cr-W matrix alloy used to hold extremely hard tungsten-carbide particles. It is best used for the most severe abrasive conditions and is finished by grinding. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on machining, joining, and powder metal forms. Filing Code: Ni-546. Producer or source: Wall Colmonoy Corporation.

Colmonoy No. 6 is a high-carbon, nickel-base alloy recommended for hard facing parts to resist wear, corrosion, heat and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-78. Producer or source: Wall Colmonoy Corporation.

DURAMOLD A is the low-carbon 4 1/2% chromium type of air-hardening hobbing die steel. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-37. Producer or source: Bethlehem Steel Corporation.

Vicalloy-1 is a precipitation hardening cobalt-base alloy recommended for electromechanical devices. It is a permanent magnet alloy, combining improved magnetic properties and a high degree of ductility. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-42. Producer or source: Wilbur B. Driver Company.

ColTung No. 1 is a nickel-base hard-surfacing alloy containing tungsten carbide in a nickel matrix with chromium borders. Hardnesses to 58 to 63 HRC can be reached. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on joining. Filing Code: Ni-509. Producer or source: Wall Colmonoy Corporation.

THERMOLD P20 is a tool steel designed expressly for molds for zinc and other low-melting casting alloys and for injection and compression molded plastics. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-238. Producer or source: Cyclops Corporation.

COLMONOY No. 69SC is a nickel-base hard surfacing alloy incorporating the qualities of Colmonoy No. 69 (Alloy Digest Ni-206, July 1974) with other enhancements. Its extended plastic range means that sagging and running of other-than-horizontal surfaces during finishing is virtually eliminated. It is supplied as an atomized powder for application with Wall Colmonoy’s SPRAYWELD Process and finished by grinding. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Ni-489. Producer or source: Wall Colmonoy Corporation.

Cobalt magnet steels have high coercive force which makes it possible to maintain strong magnetic fields with relatively short magnets. These alloys must be hardened by drastic quenching in oil to obtain the maximum magnetic properties. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: SA-44. Producer or source: Alloy steel mills and foundries.

DURA-BAR G1A alloyed iron is engineered for the glass mold industry. It is produced by continuous casting which results in fine graphite flake size and size and fine matrix structure. This datasheet provides information on composition, microstructure, and hardness. It also includes information on heat treating and machining. Filing Code: CI-61. Producer or source: Federal Bronze Products Inc..

Ferrium M60S is an ultrahigh-strength stainless steel designed with objectives of achieving strength and hardness levels comparable to non-stainless cutlery steels such as M2 tool steel. This datasheet provides information on hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: SS-953. Producer or source: QuesTek Innovations, LLC.