BETHLEHEM M-7 is a high-molybdenum type of high-speed steel. Because of its high-carbon and high-vanadium contents, it has superior resistance to abrasion and is used for tools where edge toughness and wear resistance are required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-332. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM M-2 is a molybdenum-tungsten type of high-speed steel. In general, it can be used for the same applications as the 18 tungsten-4 chromium-1 vanadium (AISI Type T1) high-speed steel. Its higher carbon content (relative to Type T1) and balanced composition produce properties applicable to all general-purpose high-speed uses. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-319. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM 57 SPECIAL is the 14% tungsten type of hot-work tool steel. It has high ability to retain hardness at high temperatures with high wear resistance. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-104. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM RQ 100L is a low-carbon, low-sulfur, 100 ksi minimum yield strength quenched-and-tempered plate steel offering improved toughness and weldability over other quenched-and-tempered plate grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on forming, heat treating, and joining. Filing Code: CS-125. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM 57HW is the 9% tungsten type of hot-work tool steel, having excellent red-hardness and abrasion resistance compared with relatively good shock resistance for high operating temperatures. It corresponds to AISI Type H21 hot work tool steel. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-84. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM RQ-100A is a heat-treated alloy steel having 100,000 psi yield strength through 11/4-in. thickness, in combination with good toughness, abrasion resistance and weldability. It is engineered specifically for structural applications such as earth moving equipment,buildings, bridges, and pressure vessels where high strength is required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-272. Producer or source: Bethlehem Steel Corporation. See also Alloy Digest SA-221, January 1968.

BETHLEHEM HW 8 is a high-alloy hot-work tool steel containing chromium, molybdenum and vanadium. Its combined characteristics comprise high red-hardness, high abrasion-resistance, resistance to heat-checking, and adequate toughness for its many applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-248. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM Cr-Mo-W is a general purpose hot work tool and die steel having excellent resistance to wear, shock, and drastic changes in temperature. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-57. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM T-1 is the 18 tungsten-4 chromium-1 vanadium high-speed steel and is used for general-purpose cutting operations. It has a balanced combination of shock-resistance and abrasion-resistance for cutting tools, high red-hardness and decarburizes the least of the standards high-speed steels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-270. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM 67 CHISEL is the general-purpose, tungsten-type of shock-resisting tool steel. It has excellent properties for cold battering tools and hot-work shock applications. It is characterized by unusual toughness, resistance to fatigue and relative ease of heat treatment. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-48. Producer or source: Bethlehem Steel Corporation.

A-H5 is an air-hardening, non-deforming tool and die steel. It is deep hardening, has high abrasion resistance, and has good toughness for severe service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-196. Producer or source: Bethlehem Steel Corporation.

BETHLEHEM HOT WORK 8 alloy is a hot-work tool steel having high wear resistance in the higher range of operating temperatures. It also has high resistance to surface wash and heat-checking. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-3. Producer or source: Bethlehem Steel Corporation.

CROMO-V is a 5% chromium hot-work steel with an excellent combination of red-hardness, shock resistance and abrasion resistance; these are the properties needed for good hot-work characteristics. It will withstand drastic cooling from maximum operating temperatures. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-313. Producer or source: Bethlehem Steel Corporation.

AISI 8720 is a low alloy carburizing steel capable of producing high core strength and toughness. It is recommended for shock resistant machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-211. Producer or source: Alloy steel mills and foundries.

AISI 9440 is a medium carbon, nickel-chromium-molybdenum alloy steel of the oil hardening type. It has good hardenability and desirable toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-77. Producer or source: Alloy steel mills and foundries.

UNS S41003 is a low-cost utilitarian martensitic stainless steel to be used for highway and other applications. It is used in the tempered condition at several strength levels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on forming, heat treating, and joining. Filing Code: SS-815. Producer or source: Bethlehem Lukens Plate.

NJZ BRASCO is a powder metallurgy copper-zinc-cobalt alloy designed for use in the as-sintered condition. It provides sintered parts with substantially higher strength and hardness than conventional 70 copper/30 zinc brass P/M parts. Also, it undergoes significantly less dimensional change than 70/30 brass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Cu-293. Producer or source: New Jersey Zinc Company.

AISI 4620 is a nickel-molybdenum case hardening steel recommended where high core toughness and shock resistance are required. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-63. Producer or source: Alloy steel mills and foundries.

AISI 9255 is a silico-manganese spring and tool steel having good toughness and shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-73. Producer or source: Alloy steel mills and foundries.

AISI 4063 is a low-molybdenum alloy steel, recommended for heavy duty applications requiring strength and toughness with decrease in temper brittleness. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-84. Producer or source: Alloy steel mills and foundries.