1-20 of 53 Search Results for

Aluminum alloys 2124

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (2008) 57 (5): Al-413.
Published: 01 May 2008
... Kaiser aluminum alloy 2124 is a high-purity version of 2024 with tighter controls on the iron and silicon for an increase in strength and toughness. It is primarily used as plate in the aircraft industry. This data sheet applies to sheet, coil, and plate in the T851 temper. This datasheet provides...
Journal Articles
Alloy Digest (1990) 39 (12): Al-310.
Published: 01 December 1990
... AA 2124 is a heat treatable aluminum plate alloy in which copper is the principal strengthening element. The alloy carries reduced allowable silicon and iron contents to ensure improved toughness. This datasheet provides information on composition, physical properties, elasticity, and tensile...
Journal Articles
Alloy Digest (2006) 55 (7): Al-399.
Published: 01 July 2006
...) temper, . ( circular-mil/ft) Mechanical Properties: Modulus of elasticity, GPa (106 psi) 73 (10.6) ALCOA 2124 PLATE Filing Code: Al-399 Aluminum July 2006 ALCOA 2124 PLATE (Aerospace Aluminum Alloy) Alloy 2124 is a heat treatable plate alloy that was developed for elevated-temperature application...
Journal Articles
Alloy Digest (2008) 57 (7): Al-415.
Published: 01 July 2008
... Alcan 2297-T87 is an Al-Cu-Li-Mn-Zr alloy, developed to provide improved fatigue and damage tolerance with equivalent strength and corrosion resistance compared with incumbent alloy 2124-T851. The alloy possesses fatigue strength 3 to 5 times that of other aluminum alloys. This datasheet provides...
Journal Articles
Alloy Digest (2000) 49 (9): Al-372.
Published: 01 September 2000
... toughness at moderately high strength levels. Approxi- mate bands for axial stress notch fatigue data are shown in Fig. 1 for 2024 T351 and T851 products. Heat Treatment: The recommended practices for heat-treating and aging alloy 2024 sheet and plate are described in MIL-H-6088, Heat Treatment of Aluminum...
Journal Articles
Alloy Digest (2011) 60 (1): CS-161.
Published: 01 January 2011
... 0.12 0.12 0.12 0.12 Silicon, max 0.03 0.10 0.10 0.10 0.10 0.10 Manganese, max 1.50 1.60 1.80 1.90 2.00 2.10 Phosphorus, max 0.25 0.25 0.25 0.25 0.25 0.25 Sulfur, max 0.10 0.10 0.10 0.10 0.10 0.10 Aluminum, min 0.15 0.15 0.15 0.15 0.15 0.15 Niobium, max 0.09 0.09 0.09 0.09 0.09 0.09 Vanadium 0.20 0.20...
Journal Articles
Alloy Digest (2008) 57 (7): SA-581.
Published: 01 July 2008
... max Aluminum 0.015 max Niobium(b) 0.09 max Vanadium(b) 0.20 max Titanium(b) 0.15 max Iron bal (a)For hot dip galvanizing and thin zinc layer (50 80 m). (b) Sum of Nb, V, and Ti = 0.22 max Physical Properties: (Approximate) Density, kg/m3 (lb/in.3) 7750 (0.280) Mechanical Properties: Yield strength...
Journal Articles
Alloy Digest (2008) 57 (10): SA-585.
Published: 01 October 2008
... 1.50 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium 0.09(b) max Vanadium 0.20(b) max Titanium 0.15(b) max Iron bal (a) For hot dip galvanizing and thin zinc layer (50 80 m). (b) Sum of Nb, V, and Ti = 0.22 max Physical Constants: (Approximate) Density, kg/m3 (lb/in.3) 7750 (0.280...
Journal Articles
Alloy Digest (2008) 57 (11): SA-587.
Published: 01 November 2008
... vehicles, trailers, cranes, and containers. Domex is a registered trademark of SSAB Swedish Steel, Inc. Chemical Composition, wt (Typical) Carbon 0.10 max Silicon(a) 0.03 max Manganese 1.50 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium(b) 0.09 max Vanadium(b) 0.20 max Titanium(b...
Journal Articles
Alloy Digest (2009) 58 (1): SA-591.
Published: 01 January 2009
... Composition, wt (Typical) Carbon 0.10 max Silicon 0.10 max(a) Manganese 1.50 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max. Niobium 0.09 max(b) Vanadium 0.20 max(b) Titanium 0.15 max(b) Iron bal (a) For hot dip galvanizing, this must be specified. (b) Sum of Nb, V, and Ti = 0.22 Physical...
Journal Articles
Alloy Digest (2009) 58 (2): SA-592.
Published: 01 February 2009
..., cranes, and containers. Domex is a registered trademark of SSAB Swedish Steel, Inc. Chemical Composition, wt (Typical) Carbon 0.10 max Silicon 0.10 max(a) Manganese 1.60 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium 0.09 max(b) Vanadium 0.20 max(b) Titanium 0.15 max(b) Iron bal (a...
Journal Articles
Alloy Digest (2009) 58 (3): SA-594.
Published: 01 March 2009
... vehicles, trailers, cranes, and containers. Domex is a registered trademark of SSAB Swedish Steel, Inc. Chemical Composition, wt (Typical) Carbon 0.12 max Silicon 0.10(a) max Manganese 1.80 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium 0.09(b) max Vanadium 0.20(b) max Titanium 0.15(b...
Journal Articles
Alloy Digest (2009) 58 (4): SA-598.
Published: 01 April 2009
... registered trademark of SSAB Swedish Steel, Inc. Chemical Composition, wt (Typical) Carbon 0.12 max Silicon 0.10 max(a) Manganese 1.90 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium 0.09 max(b) Vanadium 0.20 max(b) Titanium 0.15 max(b) Iron bal (a) If the material is to be hot dip...
Journal Articles
Alloy Digest (2009) 58 (5): SA-599.
Published: 01 May 2009
... weight of heavy vehicles, trailers, cranes, and containers. Domex is a registered trademark of SSAB Swedish Steel, Inc. Chemical Composition, wt (Typical) Carbon 0.12 max Silicon(a) 0.10 max Manganese 2.00 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium(b) 0.09 max Vanadium(b) 0.20...
Journal Articles
Alloy Digest (2009) 58 (6): SA-602.
Published: 01 June 2009
... weight of heavy vehicles, trailers, cranes and containers. Domex is a registered trademark of SSAB Swedish Steel, Inc. Chemical Composition, wt (Typical) Carbon 0.12 max Silicon 0.10 max(a) Manganese 2.10 max Phosphorus 0.025 max Sulfur 0.010 max Aluminum 0.015 max Niobium 0.09 max(b) Vanadium 0.20 max(b...
Journal Articles
Alloy Digest (2009) 58 (7): SA-603.
Published: 01 July 2009
... Phosphorus 0.020 max Sulfur 0.010 max Aluminum 0.015 max Iron bal In addition, Nb, V, Cr, Mo, Ni, B, and Ti may be used. CEV = 0.44 (typical) = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15. CET = 0.29 (typical) = C + (Mn + Mo)/10 + (Cr + Cu)/20 + Ni/40. Physical Properties: (Approximate) Density, kg/m3 (lb/in.3...
Journal Articles
Alloy Digest (2009) 58 (8): SA-605.
Published: 01 August 2009
... 1.40 max Phosphorus 0.020 max Sulfur 0.005 max Aluminum 0.020 max Boron 0.005 max Niobium 0.04 max Chromium 0.80 max Vanadium 0.08 max Copper 0.10 max Titanium 0.02 max Molybdenum 0.70 max Nickel 2.0 max Nitrogen 0.010 max Iron bal CEV = 0.59 (typical) = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15. CET...
Journal Articles
Alloy Digest (2016) 65 (7): SA-759.
Published: 01 July 2016
... the name indicates the minimum yield strength. Chemical Composition, wt (Typical, maximum) Carbon 0.12 Silicon 0.21 Manganese 1.90 Phosphorus 0.025 Sulfur 0.010 Aluminum 0.015 Niobium 0.09 Vanadium 0.20 Titanium 0.15 Iron bal Carbon equivalent information: CEV = 0.33; 2 10 mm (0.08 0.4 in.) = C + Mn/6...
Journal Articles
Alloy Digest (2016) 65 (9): SA-766.
Published: 01 September 2016
...: (412) 269-2120 Fax: (412) 269-2124 www.swedishsteel.us In Sweden: SSAB Tunnplat AB Borlange 781 84 Tel: +46-243-700-00 Fax: +46-243-720-00 www.ssab.com ISSN: 002-614X SA-766B General Characteristics: The alloy is a high-strength structural steel at 900 MPa (131 ksi). Strenx 900 MC is a hot-rolled...
Journal Articles
Alloy Digest (2016) 65 (11): SA-772.
Published: 01 November 2016
... wide range of strength from 600 1300 MPa (87 189 ksi). The number in the name indicates the minimum yield strength in MPa. Chemical Composition, wt (Typical, maximum) Carbon 0.12 Silicon 0.25 Manganese 1.30 Phosphorus 0.020 Sulfur 0.010 Aluminum 0.015 Niobium 0.05 Vanadium 0.05 Titanium 0.07 Iron bal...