Search Results for Aluminum A356

Aluminum A356 is a sand and permanent mold casting alloy that responds to an age-hardening heat treatment. It is recommended for aircraft and missile components where high strength and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: Al-192. Producer or source: Aluminum Company of America.

Aluminum A357 is a high strength, pressure tight sand and permanent mold aluminum casting alloy. It is age-hardenable. It is recommended for cast gear cases, cylinder heads, transmission cases and strong structural castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-163. Producer or source: Aluminum Company of America.

Alcoa EverCast (C862F) is a proprietary, heat-treatable, Al-Zn-Mg-Cu casting alloy (7xx.x series) that also contains small amounts of vanadium and zirconium. Compared with conventional 3xx.x alloys, 7xx.x alloys eliminate brittle silicon particles thus allowing for the highest fatigue strength. The result is significantly higher tensile and fatigue strengths compared to the traditional A356 alloy with properties equal to or better than most 6xxx alloy forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting. Filing Code: Al-471. Producer or source: Alcoa Corporation.

DURALCAN F3N.xxS is an aluminum composite with virtually no Cu or Ni designed for use in corrosion-sensitive applications. The matrix alloy is similar to 360 (See Alloy Digest Al-103, May 1961, and Al-245, April 1983). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: AL-332. Producer or source: Duralcan USA.

Alloys R-A356.0, ER4010 and R4010 include aluminum-silicon-magnesium Almigweld and Altigweld filler wires with low iron content to weld alloys 356.0 (Alloy Digest Al-223, May 1976) and A356.0 (Alloy Digest Al-258, June 1985). This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: Al-323. Producer or source: AlcoTec Wire Corporation.

Kaiser Alloy 401-C is a medium strength alloy with good machinability for manifold blocks and applications requiring deep drilling. This datasheet provides information on composition, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Al-435. Producer or source: Kaiser Aluminum.

Duralcan F3S.xxS is a heat treatable aluminum alloy-matrix gravity composite. The base alloy is similar to Aluminum 359 (Alloy Digest Al-188, July 1969); the discontinuously reinforced composite is silicon carbide. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance. Filing Code: AL-329. Producer or source: Alcan Aluminum Corporation.

Alcotec Weld Wire 5554 is a non-heat-treatable filler wire with moderate high-strength capabilities. The principal alloying elements are magnesium, manganese, chromium, and titanium. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on low and high temperature performance as well as joining. Filing Code: AL-377. Producer or source: AlcoTec Wire Corporation.

ALUMINUM A201 offers high strength, high impact resistance, a good combination of room and elevated-temperature performance, and good ballistic properties. Its ballistic properties are comparable to those of the standard wrought aluminum alloys. Among its many application are components for military aircraft and missiles, and impellers for gas turbine engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-234. Producer or source: Consolidated Aluminum Corporation.