ALUMINUM 6262 is an alloy with an excellent combination of machinability, strength and resistance to corrosion. Lead and bismuth are added to provide free-machining characteristics. Its many applications include screw-machine products, housewares, marine parts. aerospace fittings and general hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-182. Producer or source: Various aluminum companies. Originally published December 1968, revised December 1980.

Kaiser Aluminum alloy 6262 (Tennalum alloy 6262) is an Al-Mg-Si-Cu-Cr-Pb-Bi alloy with characteristic good machinability and corrosion resistance and a good acceptance of coatings (anodize response). It is typically used in automotive parts, fittings, building hardware, and valve components. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-361. Producer or source: Tennalum, A Division of Kaiser Aluminum.

Kaiser Aluminum alloy KA62 (Tennalum alloy KA62) is a lead-free alternative to 6262. It offers good machinability and corrosion resistance and displays good acceptance of coatings (anodize response). It can be used in place of 6262 because its physical and mechanical properties are equivalent to those of 6262 (see Alloy Digest Al-361, September 1999). This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: AL-362. Producer or source: Tennalum, A Division of Kaiser Aluminum.

UltrAlloy is a lead-free, enhanced machining product with the inherent benefits of a 6xxx-series alloy. The alloy is produced as a cold-finished rod and bar with strength levels comparable to 6262. The alloy is registered with the Aluminum Association as X6020. This datasheet provides information on composition, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-340. Producer or source: ALCOA Wire, Rod & Bar Division. Originally published September 1996, corrected December 1996.

Kaiser Alloy 6041 is a lead-free alternative to 6262 with good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and machining. Filing Code: AL-432. Producer or source: Kaiser Aluminum. See also Alloy Digest Al-449, December 2016.

Kaiser Alloy 6064 is rod and bar and is an alternative to 6262. The alloy has characteristics of high strength, high toughness, and good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Al-448. Producer or source: Kaiser Aluminum Corporation.

Kaiser Alloy 6041 is rod and bar and is an alternative to 6262. The alloy has characteristics of very good machinability and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Al-449. Producer or source: Kaiser Aluminum Corporation. See also Alloy Digest Al-432, October 2010.

Alcoa 6262 alloy has good machinability with high strength, high corrosion resistance, excellent surface finish, and applied coating acceptance. The T8 temper offers excellent residual stress control. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining, joining, and surface treatment. Filing Code: AL-351. Producer or source: ALCOA Wire, Rod & Bar Division.

Alcoa C238 is a cold-finished aluminum wrought product developed for applications requiring postbrazing and welding strength. The alloy has good machinability and roll-threading characteristics. It has slightly lower corrosion resistance as compared to 6xxx series alloys. Alloy C238 has excellent welding and very good brazing properties. Initial applications include fittings and connectors that are brazed and/or welded. This product is also available in cold-heading rod that has been used to cold-form connectors. This datasheet provides information on tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: AL-353. Producer or source: ALCOA Wire, Rod & Bar Division.

Alcoa Excalibar 6013 alloy has high strength, good machinability, and good corrosion resistance. It is easily joined by all welding and brazing methods, has excellent compressive properties, and has good applied coating acceptance. See also Alcoa Aluminum Alloy 6013, Alloy Digest Al-282, revised July 1988. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-348. Producer or source: ALCOA Wire, Rod & Bar Division.

Kaiser Aluminum Alloy 6040 has good strength and good corrosion resistance. It was developed for machinability with low lead content. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: AL-411. Producer or source: Tennalum, A Division of Kaiser Aluminum.

The high strength of Tenform XF350, a hot-rolled high-strength low-alloy (HSLA) steel, allows the user to increase the strength of the finished component or to reduce the thickness. The material finds use in the construction and the automotive industries. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on forming. Filing Code: CS-147. Producer or source: Hille & Mueller, USA Inc.

The high strength of Tenform XF450, a hot-rolled high-strength low-alloy steel, allows the user to increase the strength of a finished component or to reduce the thickness. The steel is used in the construction and the automotive industries. This datasheet provides information on composition, physical properties, tensile properties. and bend strength. It also includes information on forming. Filing Code: CS-148. Producer or source: Hille & Mueller, USA Inc. See also Alloy Digest CS-173, November 2012.

Deltalloy 4032 has good machinability and drilling characteristics when using single-point or multispindle screw machines and an excellent surface finish using polycrystalline or carbide tooling. The alloy demonstrates superior wear resistance and may eliminate the need for hard coat anodizing. Deltalloy 4032 is characterized by high strength and a low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as machining and surface treatment. Filing Code: AL-347. Producer or source: ALCOA Wire, Rod & Bar Division.

Haynes 230-W Filler Wire is a specially formulated welding filler metal designed for the fabrication of Haynes 230 alloy (see Alloy Digest Ni-320, August 1985). This datasheet provides information on composition, physical properties, elasticity, and bend strength. It also includes information on joining. Filing Code: Ni-558. Producer or source: Haynes International Inc.

The high strength of Tenform XF450, a hot-rolled high-strength low-alloy steel, allows the user to increase the strength of the finished component or to reduce the thickness. Construction and the automotive industries offer uses. This datasheet provides information on composition, physical properties, and bend strength as well as fatigue. It also includes information on forming and joining. Filing Code: CS-173. Producer or source: Hille & Mueller, USA Inc.. See also Alloy Digest CS-148, January 2007.

Alcoa Aluminum Alloy 6013 is a high-strength Al-Mg-Si-Cu alloy. It is available in five tempers. It is crossing many market areas of applications in aerospace, defense, automotive and general structural use. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-282. Producer or source: Aluminum Company of America. Originally published September 1987, revised July 1988.