1-20 of 130 Search Results for

ALLOY 875

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1977) 26 (10): SS-345.
Published: 01 October 1977
... ALLOY 875 is an iron-chromium-aluminum electrical-resistance alloy with excellent resistance to oxidation at elevated temperatures. It was developed primarily for use as the heating element in industrial furnaces, kilns and other equipment where continuous operating temperatures up to 2350 F may...
Journal Articles
Alloy Digest (1976) 25 (10): Cu-320.
Published: 01 October 1976
... Copper Alloy No. 875 is a copper-base casting alloy for applications requiring a combination of high strength and good resistance to corrosion. It cannot be hardened or strengthened by heat treatment. Its many applications include valve parts, small propellers, gears and marine components...
Journal Articles
Alloy Digest (2003) 52 (2): SS-875.
Published: 01 February 2003
...: SS-875. Producer or source: Carpenter Specialty Alloys. Producer or Source: Carpenter Specialty Alloys Copyright © ASM International® 2003 2003 ASM International Carpenter Project 70+ Type 304/304L chemical composition corrosion-resistant alloys elasticity heat treatability...
Journal Articles
Alloy Digest (2018) 67 (7): Cu-875.
Published: 01 July 2018
... Alloy CuSn8 (UNS C52100) is a high-performance copper alloy with 8% tin. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength. It also includes information on wear resistance as well as forming and joining. Filing Code: Cu-875...
Journal Articles
Alloy Digest (2021) 70 (8): SA-875.
Published: 01 August 2021
... workability SSAB RAMOR 500 (Alloy Protection Steel) Filing Code: SA-875 Alloy Steel :: August 2021 Materials Park, Ohio 44073-0002, USA :: +1.440.338.5151 :: www.asminternational.org :: matinfo@asminternational.org Published by ASM International® :: Data shown are typical, not to be used for specification...
Journal Articles
Alloy Digest (2009) 58 (6): Fe-148.
Published: 01 June 2009
... www.asminternational.org CARPENTER AERMET® 340 ALLOY DOI: 10.31399/asm.ad.fe0148 Age. The typical aging treatment is a single age at 482 ± 6 °C (900 ± 10 °F) for 3 8 h followed by air cooling to room temperature. Parts should never be aged at a temperature below 468 °C (875 °F). Alternative double-aging treatments can...
Journal Articles
Alloy Digest (2016) 65 (10): Cu-852.
Published: 01 October 2016
... for specification purposes. See applicable ASTM specification references. Heat Treatment: Annealing temperature, °C (°F) 375 650 (707 1202) Workability: Alloy C10200 exhibits an excellent capacity for being hot worked and forged. Hot working temperature is 750 875 °C (1382 1607 °F). The alloy has excellent...
Journal Articles
Alloy Digest (1993) 42 (5): TS-516.
Published: 01 May 1993
... Filing Code: Tool Steel TS-516 - DIGEST- DATA ON WORLD WIDE METALS AND ALLOYS MAY 1993 THYROTHERM 2713 (Tough Hot Work Die Steel) PcabhdW Aloy Digasl, lnc 12014779161 27CbfbklStIW~NJ.07050/U.SA THYROTHE.RM 2713 is a tough hot work die steel with retention to tempering. nrTHYROTHERM is a trademark...
Journal Articles
Alloy Digest (1960) 9 (8): Mg-47.
Published: 01 August 1960
... MAGNESIUM AZ91C is a general sand casting alloy having good strength, pressure tightness and ductility. It was designed to give optimum properties in both the T4 and T6 tempers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties...
Journal Articles
Alloy Digest (1958) 7 (3): SS-71.
Published: 01 March 1958
... Copyright © ASM International® 1996 1996 ASM International castability chemical composition CIRCLE L17 corrosion-resistant alloys creep properties fatigue properties heat treatability high-temperature alloys joinability machinability physical properties Rockwell hardness tensile...
Journal Articles
Alloy Digest (1976) 25 (1): Cu-307.
Published: 01 January 1976
... (2 in % Brine11 hardness (3000-kg load) Fatigue strength (108 cycles), psi Charpy impact (V-notch), ft-lb Table 2 - MECHANICAL PROPERTY REQUIREMENTS (As specified in ASTM B 198 for Copper Alloy No. 875 whose composition range covers Atlantic 13B Alloy) 68000 3 2000 30000 30000 17 120 22000 32 0.300...
Journal Articles
Alloy Digest (1994) 43 (4): Fe-107.
Published: 01 April 1994
... As hardened 5 1.0/53.0 875°F (468°C) 5 hrs. 54.5155.5 9OO F (482 C) 5 hrs. 53.0154.0 925 F (496°C) 5 hrs. 51-O/52.5 Heat Treatment: Decarburization: Like other carbon bearing high strength alloys, AerMet 100 alloy is subject to decarburizing dur- ing hardening. Heat treatment should take place in a neutral...
Journal Articles
Alloy Digest (2004) 53 (6): Cu-715.
Published: 01 June 2004
... Olin Alloy C5218 is a phosphor bronze alloy given both dispersion- and solid-solution strengthening for applications in the automotive connector market. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. Filing Code: CU-715...
Journal Articles
Alloy Digest (1994) 43 (2): TS-523.
Published: 01 February 1994
... thermal properties Al&@y THYSSEN P20 SUPER F~~gB~uA=~ - DIGEST- DATA ON WORLD WIDE METALS AND ALLOYS P-by: Akqb6OSl.k12014%6161 27C6nfii~~NJ.07060/U.SA THYSSEN P20 SUPER (P20 modified in carbon and nickel) THYSSEN P20 SUPER is a modified P20 with higher carbon and nickel to improve impact strength...
Journal Articles
Alloy Digest (2021) 70 (5): TS-813.
Published: 01 May 2021
... CarTech AerMet-for-Tooling is a low-carbon, cobalt-nickel-chromium-molybdenum, alloy tool steel that exhibits high strength and high hardness together with exceptional ductility and toughness. This alloy is designed for components that require a hardness of about 53–55 HRC along with very high...
Journal Articles
Alloy Digest (2011) 60 (6): Cu-799.
Published: 01 June 2011
... Treatment: Annealing temperature, 475 650 °C (887 1202 ºF) Workability: Hot Working. C50700 has good hot workability. Hot working temperature: 800 to 875 ºC (1450 to 1600 ºF). Cold Working. C50700 has excellent cold workability and is well suited to all forms of cold work. When annealed, the alloy can...
Journal Articles
Alloy Digest (2002) 51 (6): Cu-682.
Published: 01 June 2002
... Wieland-L25 is a copper-nickel alloy used almost exclusively as a coining alloy. It shows little variation in its electrical conductivity. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as deformation. It also includes information...
Journal Articles
Alloy Digest (1997) 46 (12): SS-703.
Published: 01 December 1997
... Finkl 420MB is a resulfurized modification of AISI 420F stainless steel for mold bases. The alloy is clean, tough, and machinable. It is available by VAD and balanced oxidation techniques. This datasheet provides information on composition, physical properties, and hardness. It also includes...
Journal Articles
Alloy Digest (2005) 54 (12): TS-624.
Published: 01 December 2005
... DRX is similar to AISI S7. It has a higher carbon content and is alloyed with 3.25% Cr and 1.4% Mo for emphasis on good wear resistance. DRX is typically used for inserts or smaller molds in applications requiring high production volume, or molds subjected to high-wear condition. It is supplied...
Journal Articles
Alloy Digest (1968) 17 (9): SS-213.
Published: 01 September 1968
... Technology Corporation. Producer or Source: Carpenter Technology Corporation Copyright © ASM International® 1996 1996 ASM International Carpenter Pyromet 355 chemical composition corrosion-resistant alloys creep properties elasticity fatigue properties fracture toughness gas turbine...