NILO alloy 36 is a binary iron-nickel alloy having a very low and essentially constant coefficient of thermal expansion at atmospheric temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-79. Producer or source: Inco Alloys International Inc..

ALLOY 36 is an iron-36% nickel alloy with the lowest thermal coefficient of expansion among commercial alloys. It is recommended for applications that require very low dimensional changes with variations in temperature. Among many applications it is used for length standards, bimetals and tapes and wires for geodetic measurements. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-55. Producer or source: Magnetics Specialty Metals Division.

VDM 36 (Pernifer 36) is a binary iron-nickel alloy with a particularly low coefficient of linear thermal expansion. This alloy is used for applications where dimensional changes due to temperature variation must be minimized or in conjunction with high expansion alloys in applications where a motion is desired when the temperature changes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-775. Producer or source: VDM Metals GmbH.

HAYNES Alloy No. 36 is a cobalt-base alloy having excellent strength at temperatures up to 1800 deg. F. It is the cast modification of wrought HAYNES Alloy No. 25 and has been used successfully in jet engine blading and nozzle vanes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-17. Producer or source: Haynes Stellite Company.

Carpenter Invar 36 alloy is a 36% nickel-iron alloy with a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 204 deg C (400 deg F). This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on low and high temperature performance. Filing Code: FE-131. Producer or source: Carpenter Technology Corporation.

TECHALLOY 36 Alloy is an iron-nickel alloy that has a thermal expansion rate about 10% of the rate for carbon steel up to 400 F. It provides the lowest thermal expansion rate of all similar types of alloys. It has fairly good room-temperature mechanical properties in the annealed condition: a tensile strength of 71,000 psi and an elongation of 41%; also, it is tough at cryogenic temperatures. Among its many applications are electronic components, cryogenic parts and aircraft controls. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-58. Producer or source: Techalloy Company Inc..

UNISPAN 36 is a 36% nickel-iron alloy having low thermal expansion in a -400 F to +350 F range. It is recommended for parts in precision machinery and for applications where dimensional changes due to temperature variation must be minimized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-43. Producer or source: Cyclops Corporation.

APEX 36 is a high silicon, aluminum die casting alloy having high fluidity, excellent castability and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as casting and machining. Filing Code: Al-66. Producer or source: Apex Smelting Company.

COLUMBIUM D-36 is a readily fabricable, moderate strength columbium-base alloy for high temperature service. This alloy is double consumable-electrode vacuum arc melted. It has a strength to density ratio at 2000 F (stress-relieved sheet) of 80500. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cb-8. Producer or source: E. I. Dupont de Nemours & Company Inc..

NAS 36 is a nickel-iron alloy with a low coefficient of thermal expansion and is sensitive to changes in size. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming. Filing Code: Fe-154. Producer or source: Nippon Yakin Kogyo Company Ltd.

SSC Invar 36 was developed for use in applications where dimensional stability is essential. It is a nickel-iron alloy with a very low coefficient of thermal expansion from cryogenic temperatures to 200 deg C (390 deg F). It is utilized in aerospace composite tooling and die applications, as well as laser components, and cryogenic components and piping: liquefied natural gas production, storage, and transportation. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Fe-158. Producer or source: Sandmeyer Steel Company. Originally published December 2011, revised February 2012.

Supra 36 is a Fe-Ni alloy with 36% nickel content that exhibits the highest electrical resistivity in the Fe-Ni system. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Fe-159. Producer or source: Aperam Alloys USA.

Magnifier 36 is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 0.75 ohm mm 2 /m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-111. Producer or source: VDM Technologies Corporation.

Bismuth-22.6Pb-19.1In-8.3Sn-5.3Cd is a eutectic, controlled-shrinkage alloy that has a melting point of 117 F (47 C). It provides the engineer, scientist and technician with easily castable material that is ready for use soon after it freezes. This alloy can be recycled into new uses any number of times. Its many uses include fusible elements in safety devices, model railroading, low-temperature solder and proof casting. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: Bi-36. Producer or source: Producers of low-melting alloys.

HASTELLOY ALLOY B is a nickel-molybdenum-iron alloy well suited for equipment handling boiling hydrochloric acid and wet hydrochloric acid gas. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-36. Producer or source: Haynes Stellite Company.

Invar is an Fe-Ni alloy with 36% Ni content that exhibits the lowest expansion of known metals from very low temperatures up to approximately 230 deg C (445 deg F). Invar M93 is a cryogenic Invar with improved weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear and bend strength as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as forming and joining. Filing Code: FE-143. Producer or source: Metalimphy Precision Alloys.

Carpenter Silicon Core Iron "B" is melted in electric arc furnaces to exacting chemical specifications, and carefully controlled in rolling and annealing practices to produce a fine grained uniform quality magnetic core alloy. Silicon Core Iron "B" is not recommended for components which must be cold formed due to its high silicon content. This alloy was covered with 4 other silicon core irons in Fe-36, November, 1968. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: Fe-90. Producer or source: Carpenter.

Tg 27 Zinc Alloy is a zinc-aluminum-copper high-strength foundry alloy that is well suited to structural applications, once the exclusive domain of malleable and cast iron, bronzes and aluminum. Tg 27 offers an as-sand-cast tensile strength of 58,000 to 64,000 psi at modest costs. It is extremely resistant to galling because it has natural lubricity and is thus well suited to bearing and bushing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-36. Producer or source: Texasgulf Inc..

UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm 2 /m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.